科研 Skill
SLS工艺参数批次优化
sls-process-optimization
Optimizes polymer SLS process parameters batch by batch using build history and ASTM D638/D790 test data. Use when tuning fill energy density or surface temperature for SLS.
SKILL.md
SLS process optimization (agentic)
Pak, Alvarado & Barati Farimani (arXiv:2608.25928, 2026) let an agent remember every build and its
ASTM results, then propose the next batch on an open-source SLS printer. The agent reached datasheet
values for UTS and flexural strength in 3–4 batches per material. scripts/sls.py is that memory,
the test-data reduction, and a bounded suggestion engine. You reason, explain, and let the user
approve. Paper data and numbers are in references/paper-notes.md.
Workflow
- Set up the history.
python scripts/sls.py --db builds.sqlite init --seed-paperloads the paper's 21 batches (PA12 GF, PA11 Onyx, PA12 Blend). Omit--seed-paperfor an empty history.- Add the user's powder with its datasheet targets and DSC melt peak:
material --name "PA12 White" --tds Et=1950,UTS=47 --tmelt 186.
- First batch of a new powder. Follow the machine's patch test (the paper prints a 5 × 5 grid of
energy settings) and start from the lowest energy that sinters visibly. If nothing has been
recorded,
suggestreturns a conservative starting point. - After each build, reduce the test data.
python scripts/sls.py astm --test d638 --type 4 --csv t1.csv t2.csv t3.csv t4.csv t5.csv > tensile.json python scripts/sls.py astm --test d790 --csv f1.csv f2.csv f3.csv > flex.json python scripts/sls.py --db builds.sqlite result --batch Q --from tensile.json [--Ef .. --sf ..]- Each CSV needs a load (or force) column in N and an extension/deflection column in mm. Pass
--strainif the second column is already strain. - The output includes mean ± sd and the best specimen. Record the best (paper convention), but
quote the scatter. If one batch can't be reproduced, mark it
--exclude.
- Each CSV needs a load (or force) column in N and an extension/deflection column in mm. Pass
- Propose the next batch.
python scripts/sls.py --db builds.sqlite suggest --material "PA11 Onyx" [--objective UTS|Et|score]- Candidates come ranked by expected improvement, within machine and step bounds, and list which levers changed.
- Pick one, and change one or two levers. Explain the physics:
- more fill energy and overlap → better coalescence, until warping or degradation sets in;
- higher surface temperature → less curl and better layer bonding, until the powder cakes.
- Use the notes (warping, brittle corners, early build stop) to override the model when needed.
batchrefuses a surface temperature within 3 °C of the melt peak.
- Track progress:
history --material ... --plot progress.pngshows every batch against the datasheet targets.
Rules
- The datasheet is the target, but machine and atmosphere matter. PA11 Onyx is specified for nitrogen, which the paper's machine lacked. Say when a target is unreachable on this setup.
- Every proposal needs a human go-ahead before printing (the paper's GUI step). Never push parameters to a printer without approval.
Cite: Pak, Alvarado & Barati Farimani, arXiv:2608.25928 (2026).
示例提示词
根据上一批SLS试样的拉伸测试结果,帮我建议下一批的工艺参数。
所属插件
安装该插件会一并获得同领域的 35 个 Skill / MCP。
同插件的其他科研 Skill
- FDM增材制造可制造性设计Checks an existing STEP part for FDM printability with the AgentsCAD method: overhang detection, reorientation, chamfers, and kernel plus visual verification. Use for DFAM review before 3D printing.
- 激光粉末床合金可打印性筛选Screens metal alloy compositions for laser powder bed fusion printability using CALPHAD or built-in thermophysical data and Rosenthal melt pools. Use when choosing or qualifying an AM alloy.
- 增材制造文献问答检索Answers additive-manufacturing questions from the user’s own PDF library with page-cited evidence via retrieval. Use for literature-grounded AM questions instead of relying on memory.
- CADSmith文本生成CADGenerates dimensionally exact CadQuery CAD from natural language using the CADSmith plan-code-validate-refine loop. Use when the user describes a part in words and wants a CAD model.
- OpenFOAM CFD仿真自动搭建Sets up, runs, diagnoses, and reports OpenFOAM CFD cases from a plain-language request using registered flow families and deterministic accept/reject validators. Use for guided OpenFOAM case setup.
- 机械设计评审文档汇编Assembles a mechanical design-review package: requirements traceability, design FMEA with RPN, costed multi-level BOM, risk register, and a PDR/CDR checklist. Use when preparing a design review.
- 面向制造的可制造性评审Reviews a part or assembly for CNC machining, sheet metal, injection molding, casting, or 3D printing manufacturability, flagging rule violations. Use when the user asks for a DFM/DFMA check.
- 工程图纸与GD&T审查Reviews mechanical drawings (PDF, image, or DXF) for dimensioning errors, GD&T misuse, datum problems, and ASME Y14.5/ISO GPS compliance. Use when checking a drawing before release.
- 工程计算报告生成Turns engineering calculations or scripts into a formal calculation report with objective, assumptions, equations, and unit-checked results. Use for a calc report ready for sign-off.
- LLM-SR方程发现Discovers interpretable equations from engineering data with the LLM-SR loop: skeleton proposals, constant fitting, and out-of-domain scoring. Use for symbolic regression on experimental data.
- 疲劳断裂寿命分析Estimates fatigue life and crack-growth life for metal parts from S-N data, load histories, and fracture-mechanics inputs. Use for Miner’s-rule damage, rainflow counting, or Paris-law crack growth.
- 图像直接生成FDM G代码Converts a photo, sketch, or slice image of a flat or near-flat part directly into FDM G-code without CAD, via silhouette and toolpath extraction. Use for sketch-to-print without modeling.
- 点阵结构刚度逆向设计Designs 3D-printable lattice unit cells for a target stiffness using TPMS cells, printability checks, and voxel homogenization. Use for lattice infill or metamaterial design.
- 平面连杆机构综合Synthesizes planar four-bar or six-bar linkages whose end-effector traces a target curve, using graph-based topology and forward-kinematics search. Use for mechanism path-generation problems.
- LLM驱动FDM打印逐层监控Monitors an FDM print layer by layer through Klipper/Moonraker, diagnosing defects from camera images and applying safety-bounded G-code corrections. Use to watch or fix a live 3D print.
- LLM迭代桁架优化设计Designs and optimizes 2D trusses with an LLM-in-the-loop FEM workflow where proposed members are scored by an exact truss FEM. Use for iterative truss topology or sizing optimization.
- L-PBF缺陷区间预测Predicts L-PBF defect regime (keyholing, lack of fusion, balling, or none) from process parameters and checks melt-pool dimensions against standard criteria. Use when selecting LPBF parameters.
- L-PBF熔池图像超分辨率Upscales low-cost webcam images of an L-PBF build plate to high resolution via registration and a trained diffusion or CNN model. Use for in-situ L-PBF monitoring with cheap cameras.
- 机械零件强度校核Sizes and checks machine elements: bolted joints, shafts for fatigue, bearings for L10 life, springs, welds, and gears, with shown work and safety factors. Use to size or verify a machine element.
- Ashby材料选型Selects engineering materials with the Ashby method: translate function and constraints into a performance index, then screen and rank a shortlist. Use when choosing between candidate materials.
- 产品逆向拆解分析Reverse-engineers a physical product as an engineering system: function structure, costed BOM, DFA index, should-cost, FMEA, and a printable HTML report. Use when asked to tear down a product.
- 力学教学图绘制Produces mechanics teaching figures such as Mohr’s circle, shear/moment diagrams, S-N curves, and free-body diagrams as PNG/SVG. Use when asked to draw or plot a mechanics concept.
- 增材制造熔池几何预测Predicts metal AM melt-pool depth, width, length, and mode (keyhole, lack of fusion, balling, desirable) from laser power, speed, and beam size. Use for LPBF parameter prediction.
- 自然语言参数化CAD建模Turns a plain-English or dimensioned part description into a parametric CadQuery script and exports STEP, STL, and a mass/volume report. Use when asked to model or generate a CAD part.
常见问题
SLS工艺参数批次优化能做什么?
Optimizes polymer SLS process parameters batch by batch using build history and ASTM D638/D790 test data. Use when tuning fill energy density or surface temperature for SLS。
如何安装SLS工艺参数批次优化?
在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「SLS工艺参数批次优化」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。
SLS工艺参数批次优化需要哪些权限?
该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。
SLS工艺参数批次优化经过官方审核吗?
是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。