科研 Skill
机械零件强度校核
machine-element-sizing
Sizes and checks machine elements: bolted joints, shafts for fatigue, bearings for L10 life, springs, welds, and gears, with shown work and safety factors. Use to size or verify a machine element.
SKILL.md
Machine Element Sizing
All numbers come from scripts/me_sizing.py. Do not do sizing arithmetic in your head.
Workflow
- Identify the element and load case. Static vs fatigue; steady vs alternating components; operating speed.
- Collect inputs in SI (N, mm, MPa, N·mm, rpm). Convert user units first and state the conversion. If a required input is missing:
- material strengths → look up in
references/materials.mdand state the source row; - stress concentration Kf/Kfs → use the first-iteration defaults in
references/defaults.md, flag them as assumptions; - anything else → ask.
- material strengths → look up in
- Run the calculator (
python scripts/me_sizing.py <cmd> --helpfor options):python scripts/me_sizing.py bolt --size M10 --grade 8.8 --load 24000 --n-bolts 4 --fatigue python scripts/me_sizing.py shaft --Ma 70000 --Tm 120000 --Kf 1.7 --Kfs 1.5 --Sut 690 --Sy 580 python scripts/me_sizing.py bearing --type ball --Fr 2500 --rpm 1800 --hours 20000 --reliability 0.95 python scripts/me_sizing.py spring --d 2.5 --D 20 --Na 8 --F 120 --material music-wire python scripts/me_sizing.py weld --F 30000 --h 6 --L 200 --electrode E70 python scripts/me_sizing.py gear --module 3 --N 20 --F 35 --T 150000 --rpm 1200 --Sy 400 - Iterate until every check is
PASS: change size/grade/material, re-run. For shafts, round up to a standard diameter and re-run with updated Kf. - Sanity check one result by a one-line hand estimate (e.g. τ ≈ 16T/πd³) and confirm it agrees within ~20%.
- Report in the format below.
Output format
## <Element> sizing — <one-line case>
Assumptions: ... (flag every defaulted value)
| Quantity | Value | Unit | ← key intermediate values from the JSON
Checks: ✅ n_L = 2.1 ≥ 1.5 ❌ n_f = 1.1 < 1.5
Recommendation: M12 grade 10.9, preload 75% proof, torque ≈ 0.2·Fi·d
Method: <method string from JSON>
Guardrails
- Gear results are Lewis screening only; say that AGMA 2001 / ISO 6336 is required for final design.
- Weld bending requires the weld-group unit properties; see
references/weld_groups.md. - Never report a safety factor without stating the failure criterion it refers to.
示例提示词
帮我校核这根传动轴在疲劳载荷下的安全系数,并选一个合适的轴承。
所属插件
安装该插件会一并获得同领域的 35 个 Skill / MCP。
同插件的其他科研 Skill
- FDM增材制造可制造性设计Checks an existing STEP part for FDM printability with the AgentsCAD method: overhang detection, reorientation, chamfers, and kernel plus visual verification. Use for DFAM review before 3D printing.
- 激光粉末床合金可打印性筛选Screens metal alloy compositions for laser powder bed fusion printability using CALPHAD or built-in thermophysical data and Rosenthal melt pools. Use when choosing or qualifying an AM alloy.
- 增材制造文献问答检索Answers additive-manufacturing questions from the user’s own PDF library with page-cited evidence via retrieval. Use for literature-grounded AM questions instead of relying on memory.
- CADSmith文本生成CADGenerates dimensionally exact CadQuery CAD from natural language using the CADSmith plan-code-validate-refine loop. Use when the user describes a part in words and wants a CAD model.
- OpenFOAM CFD仿真自动搭建Sets up, runs, diagnoses, and reports OpenFOAM CFD cases from a plain-language request using registered flow families and deterministic accept/reject validators. Use for guided OpenFOAM case setup.
- 机械设计评审文档汇编Assembles a mechanical design-review package: requirements traceability, design FMEA with RPN, costed multi-level BOM, risk register, and a PDR/CDR checklist. Use when preparing a design review.
- 面向制造的可制造性评审Reviews a part or assembly for CNC machining, sheet metal, injection molding, casting, or 3D printing manufacturability, flagging rule violations. Use when the user asks for a DFM/DFMA check.
- 工程图纸与GD&T审查Reviews mechanical drawings (PDF, image, or DXF) for dimensioning errors, GD&T misuse, datum problems, and ASME Y14.5/ISO GPS compliance. Use when checking a drawing before release.
- 工程计算报告生成Turns engineering calculations or scripts into a formal calculation report with objective, assumptions, equations, and unit-checked results. Use for a calc report ready for sign-off.
- LLM-SR方程发现Discovers interpretable equations from engineering data with the LLM-SR loop: skeleton proposals, constant fitting, and out-of-domain scoring. Use for symbolic regression on experimental data.
- 疲劳断裂寿命分析Estimates fatigue life and crack-growth life for metal parts from S-N data, load histories, and fracture-mechanics inputs. Use for Miner’s-rule damage, rainflow counting, or Paris-law crack growth.
- 图像直接生成FDM G代码Converts a photo, sketch, or slice image of a flat or near-flat part directly into FDM G-code without CAD, via silhouette and toolpath extraction. Use for sketch-to-print without modeling.
- 点阵结构刚度逆向设计Designs 3D-printable lattice unit cells for a target stiffness using TPMS cells, printability checks, and voxel homogenization. Use for lattice infill or metamaterial design.
- 平面连杆机构综合Synthesizes planar four-bar or six-bar linkages whose end-effector traces a target curve, using graph-based topology and forward-kinematics search. Use for mechanism path-generation problems.
- LLM驱动FDM打印逐层监控Monitors an FDM print layer by layer through Klipper/Moonraker, diagnosing defects from camera images and applying safety-bounded G-code corrections. Use to watch or fix a live 3D print.
- LLM迭代桁架优化设计Designs and optimizes 2D trusses with an LLM-in-the-loop FEM workflow where proposed members are scored by an exact truss FEM. Use for iterative truss topology or sizing optimization.
- L-PBF缺陷区间预测Predicts L-PBF defect regime (keyholing, lack of fusion, balling, or none) from process parameters and checks melt-pool dimensions against standard criteria. Use when selecting LPBF parameters.
- L-PBF熔池图像超分辨率Upscales low-cost webcam images of an L-PBF build plate to high resolution via registration and a trained diffusion or CNN model. Use for in-situ L-PBF monitoring with cheap cameras.
- Ashby材料选型Selects engineering materials with the Ashby method: translate function and constraints into a performance index, then screen and rank a shortlist. Use when choosing between candidate materials.
- 产品逆向拆解分析Reverse-engineers a physical product as an engineering system: function structure, costed BOM, DFA index, should-cost, FMEA, and a printable HTML report. Use when asked to tear down a product.
- 力学教学图绘制Produces mechanics teaching figures such as Mohr’s circle, shear/moment diagrams, S-N curves, and free-body diagrams as PNG/SVG. Use when asked to draw or plot a mechanics concept.
- 增材制造熔池几何预测Predicts metal AM melt-pool depth, width, length, and mode (keyhole, lack of fusion, balling, desirable) from laser power, speed, and beam size. Use for LPBF parameter prediction.
- 自然语言参数化CAD建模Turns a plain-English or dimensioned part description into a parametric CadQuery script and exports STEP, STL, and a mass/volume report. Use when asked to model or generate a CAD part.
- FreeCAD自然语言建模Generates FreeCAD models from natural-language queries using the Query2CAD self-refinement loop: macro generation, error repair, and image-text scoring. Use for text-to-CAD in FreeCAD.
常见问题
机械零件强度校核能做什么?
Sizes and checks machine elements: bolted joints, shafts for fatigue, bearings for L10 life, springs, welds, and gears, with shown work and safety factors. Use to size or verify a machine element。
如何安装机械零件强度校核?
在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「机械零件强度校核」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。
机械零件强度校核需要哪些权限?
该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。
机械零件强度校核经过官方审核吗?
是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。