科研 Skill
激光粉末床合金可打印性筛选
am-alloy-screening
Screens metal alloy compositions for laser powder bed fusion printability using CALPHAD or built-in thermophysical data and Rosenthal melt pools. Use when choosing or qualifying an AM alloy.
SKILL.md
AM alloy screening
Pak et al. (Additive Manufacturing Letters 17 (2026) 100355) let an LLM agent chain these steps for any alloy, known or hypothetical:
- Thermo-Calc thermophysical properties
- a Rosenthal melt-pool model
- a lack-of-fusion (LoF) process map
You are that agent. scripts/alloy.py provides the deterministic tools, and it needs only numpy
and matplotlib. Paper details, plus a unit bug found in the paper's own outputs, are in
references/paper-notes.md.
Workflow
- Pin down the candidates. If the user names an application (corrosion-resistant, high-temperature,
lightweight), propose 2–5 candidate alloys and say why each fits.
knownlists the built-in grades: SS316L, 17-4PH, H13, IN718, IN625, Hastelloy X, Monel K500, Ti-6Al-4V, AlSi10Mg, Al 7050, CuSn10, Cu, W, CoCrMo.- New compositions:
compose "Fe-10Ni-10Ti"(balance element first, wt%),compose Al90Cu5Ti5, or add--atomicfor at%.
- Get properties.
python scripts/alloy.py properties --alloy IN625 --out IN625.json python scripts/alloy.py properties --comp "Fe-10Ni-10Ti" [--thermocalc] --out FeNiTi.json- With Thermo-Calc and TC-Python (
references/thermocalc.md), the database is chosen by the paper's rules. You get solidus and liquidus from the liquid fraction, density, Cp, k, and absorptivity via Drude from resistivity. - Without it, density and Cp come from the rule of mixtures; k, solidus, liquidus and absorptivity come from the nearest built-in alloy, with a confidence flag. Pass a low-confidence warning on to the user.
- With Thermo-Calc and TC-Python (
- Check units:
check mat.json(it also runs automatically). It catches density in g/m³ and Cp in J/mol·K, the slips found in the paper's repository outputs. - Map and rank.
python scripts/alloy.py map --material IN625.json --hatch 50 --layer 30 --out in625.png python scripts/alloy.py rank --materials IN625.json SS316L.json --hatch 50 --layer 30 --out compare.png- The defaults are the paper's: P and V from 100 to 1000 (W, mm/s) in steps of 100, at the layer and ±25 µm.
- Widen the ranges (
--power 50:500:25 --velocity 200:2000:100) when every alloy has an empty LoF region, otherwise the ranking only reflects tie-breakers. ranksorts by the LoF fraction at the prescribed layer, then over all layers, then by the mean overlap criterion.
- Recommend from the keyed numbers, not from impressions of the plot.
- A smaller
lack_of_fusion_fraction(a largerprocess_window_fraction) is better. The paper's one wrong recommendation came from misreading this. - Give the property source and confidence, and suggest single-track and density-cube trials before qualification.
- A smaller
Limits (state them)
- Rosenthal is conduction mode only. The LoF boundary is conservative, and keyholing and balling are
not predicted. For those, pair this skill with
lpbf-defect-predictionandmeltpool-geometry. - Absorptivity matters a lot for Cu and Al at IR wavelengths. The Drude estimate is a baseline, and real absorptivity rises sharply once keyholing starts.
- New compositions need CALPHAD or measurement. The fallback says so, and you should too.
Cite: Pak, Chandrasekhar & Barati Farimani, Addit. Manuf. Lett. 17 (2026) 100355.
示例提示词
帮我评估这个新合金配方在激光粉末床熔融打印中的可打印性和工艺窗口。
所属插件
安装该插件会一并获得同领域的 35 个 Skill / MCP。
同插件的其他科研 Skill
- FDM增材制造可制造性设计Checks an existing STEP part for FDM printability with the AgentsCAD method: overhang detection, reorientation, chamfers, and kernel plus visual verification. Use for DFAM review before 3D printing.
- 增材制造文献问答检索Answers additive-manufacturing questions from the user’s own PDF library with page-cited evidence via retrieval. Use for literature-grounded AM questions instead of relying on memory.
- CADSmith文本生成CADGenerates dimensionally exact CadQuery CAD from natural language using the CADSmith plan-code-validate-refine loop. Use when the user describes a part in words and wants a CAD model.
- OpenFOAM CFD仿真自动搭建Sets up, runs, diagnoses, and reports OpenFOAM CFD cases from a plain-language request using registered flow families and deterministic accept/reject validators. Use for guided OpenFOAM case setup.
- 机械设计评审文档汇编Assembles a mechanical design-review package: requirements traceability, design FMEA with RPN, costed multi-level BOM, risk register, and a PDR/CDR checklist. Use when preparing a design review.
- 面向制造的可制造性评审Reviews a part or assembly for CNC machining, sheet metal, injection molding, casting, or 3D printing manufacturability, flagging rule violations. Use when the user asks for a DFM/DFMA check.
- 工程图纸与GD&T审查Reviews mechanical drawings (PDF, image, or DXF) for dimensioning errors, GD&T misuse, datum problems, and ASME Y14.5/ISO GPS compliance. Use when checking a drawing before release.
- 工程计算报告生成Turns engineering calculations or scripts into a formal calculation report with objective, assumptions, equations, and unit-checked results. Use for a calc report ready for sign-off.
- LLM-SR方程发现Discovers interpretable equations from engineering data with the LLM-SR loop: skeleton proposals, constant fitting, and out-of-domain scoring. Use for symbolic regression on experimental data.
- 疲劳断裂寿命分析Estimates fatigue life and crack-growth life for metal parts from S-N data, load histories, and fracture-mechanics inputs. Use for Miner’s-rule damage, rainflow counting, or Paris-law crack growth.
- 图像直接生成FDM G代码Converts a photo, sketch, or slice image of a flat or near-flat part directly into FDM G-code without CAD, via silhouette and toolpath extraction. Use for sketch-to-print without modeling.
- 点阵结构刚度逆向设计Designs 3D-printable lattice unit cells for a target stiffness using TPMS cells, printability checks, and voxel homogenization. Use for lattice infill or metamaterial design.
- 平面连杆机构综合Synthesizes planar four-bar or six-bar linkages whose end-effector traces a target curve, using graph-based topology and forward-kinematics search. Use for mechanism path-generation problems.
- LLM驱动FDM打印逐层监控Monitors an FDM print layer by layer through Klipper/Moonraker, diagnosing defects from camera images and applying safety-bounded G-code corrections. Use to watch or fix a live 3D print.
- LLM迭代桁架优化设计Designs and optimizes 2D trusses with an LLM-in-the-loop FEM workflow where proposed members are scored by an exact truss FEM. Use for iterative truss topology or sizing optimization.
- L-PBF缺陷区间预测Predicts L-PBF defect regime (keyholing, lack of fusion, balling, or none) from process parameters and checks melt-pool dimensions against standard criteria. Use when selecting LPBF parameters.
- L-PBF熔池图像超分辨率Upscales low-cost webcam images of an L-PBF build plate to high resolution via registration and a trained diffusion or CNN model. Use for in-situ L-PBF monitoring with cheap cameras.
- 机械零件强度校核Sizes and checks machine elements: bolted joints, shafts for fatigue, bearings for L10 life, springs, welds, and gears, with shown work and safety factors. Use to size or verify a machine element.
- Ashby材料选型Selects engineering materials with the Ashby method: translate function and constraints into a performance index, then screen and rank a shortlist. Use when choosing between candidate materials.
- 产品逆向拆解分析Reverse-engineers a physical product as an engineering system: function structure, costed BOM, DFA index, should-cost, FMEA, and a printable HTML report. Use when asked to tear down a product.
- 力学教学图绘制Produces mechanics teaching figures such as Mohr’s circle, shear/moment diagrams, S-N curves, and free-body diagrams as PNG/SVG. Use when asked to draw or plot a mechanics concept.
- 增材制造熔池几何预测Predicts metal AM melt-pool depth, width, length, and mode (keyhole, lack of fusion, balling, desirable) from laser power, speed, and beam size. Use for LPBF parameter prediction.
- 自然语言参数化CAD建模Turns a plain-English or dimensioned part description into a parametric CadQuery script and exports STEP, STL, and a mass/volume report. Use when asked to model or generate a CAD part.
- FreeCAD自然语言建模Generates FreeCAD models from natural-language queries using the Query2CAD self-refinement loop: macro generation, error repair, and image-text scoring. Use for text-to-CAD in FreeCAD.
常见问题
激光粉末床合金可打印性筛选能做什么?
Screens metal alloy compositions for laser powder bed fusion printability using CALPHAD or built-in thermophysical data and Rosenthal melt pools. Use when choosing or qualifying an AM alloy。
如何安装激光粉末床合金可打印性筛选?
在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「激光粉末床合金可打印性筛选」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。
激光粉末床合金可打印性筛选需要哪些权限?
该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。
激光粉末床合金可打印性筛选经过官方审核吗?
是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。