科研 Skill
图像直接生成FDM G代码
image2gcode
Converts a photo, sketch, or slice image of a flat or near-flat part directly into FDM G-code without CAD, via silhouette and toolpath extraction. Use for sketch-to-print without modeling.
SKILL.md
Image2Gcode: image → G-code (2D / 2.5D)
Paper: Z. Wang, Y. Jadhav, P. Pak, A. Barati Farimani, Image2Gcode: Image-to-G-code generation for additive manufacturing using diffusion-transformer model, Additive Manufacturing Letters 17 (2026) 100374.
What's bundled. The paper's preprocessing, keypoint representation, post-processing and validation are reproduced exactly. The trained DDPM (DinoV2 + 1-D U-Net) is available from the authors on request. In its place, generate is a deterministic perimeter-plus-infill generator that emits the same keypoint and G-code format, so model samples drop in later (references/ddpm_hook.md). Tell the user which generator produced their toolpath.
Scope matches the paper: parts described by one cross-section, or a few layer-wise consistent ones (plates, brackets, gaskets, coasters, 2.5D extrusions). For full 3-D parts, use CAD (parametric-part-cad) and a slicer.
Setup: pip install opencv-python-headless shapely numpy matplotlib. I = scripts/i2g.py.
Workflow
- Preprocess the image.
Look atpython $I preprocess sketch.jpg --out sil.png --mode sketch # pen outline on paper python $I preprocess photo.jpg --out sil.png --mode photo # object photo on a plain background python $I preprocess slice.png --out sil.png --mode slice # already a filled cross-sectionsil.png. White should be material and holes black. If the outline isn't closed or the background leaks in, fix the input (crop, raise contrast, close gaps) rather than tuning the toolpath. - Get physical size and print settings from the user: overall size (the image has no scale), thickness (layers × layer height), nozzle and line width, infill pattern and density, temperatures, bed size. If unstated, use defaults (0.2 mm layers, 0.45 mm lines, 2 perimeters, 25% rectilinear, PLA 210/60 °C) and list them.
- Generate.
python $I generate sil.png --size-mm 60 --layers 15 --infill rectilinear --density 0.25 --out part.gcode - Validate and inspect.
python $I validate part.gcode --bed 220 220 250 python $I plot part.gcode --out paths.png --layers 0,1okmust be true. Check the plot: closed perimeters around every hole, infill inside the walls only, alternating raster direction between layers. Compare the reported area or bbox with the intended size. - Deliver the G-code, the path plot, and a settings table, with first-print advice (preview it in the user's slicer or viewer first; the header homes and heats with standard Marlin codes).
Working with existing G-code
python $I keypoints any.gcode --out kp.npzbuilds Slice-100K-style per-layer (X, Y, E) keypoints with the paper's normalization. It handles G90/G91, M82/M83, mid-file G92 E resets, and constant-E travels. Use it for datasets, comparisons, and travel-distance studies (the paper reports a −2.40% mean travel distance against heuristic slicers).python $I emit kp.npz --layer 0 --size-mm 40 --out layer.gcodedenormalizes keypoints (including model samples) into G-code at any physical scale, with--flow-multfor printer-specific extrusion.
Limits
Hand-drawn wobble carries into the part, since the boundary is the drawing. Very thin features (under 2 line widths) vanish in the perimeter offset. There's no bridging or support logic, so the parts are prismatic by construction.
示例提示词
帮我把这张零件草图直接转成可打印的FDM G代码,不用建CAD模型。
所属插件
安装该插件会一并获得同领域的 35 个 Skill / MCP。
同插件的其他科研 Skill
- FDM增材制造可制造性设计Checks an existing STEP part for FDM printability with the AgentsCAD method: overhang detection, reorientation, chamfers, and kernel plus visual verification. Use for DFAM review before 3D printing.
- 激光粉末床合金可打印性筛选Screens metal alloy compositions for laser powder bed fusion printability using CALPHAD or built-in thermophysical data and Rosenthal melt pools. Use when choosing or qualifying an AM alloy.
- 增材制造文献问答检索Answers additive-manufacturing questions from the user’s own PDF library with page-cited evidence via retrieval. Use for literature-grounded AM questions instead of relying on memory.
- CADSmith文本生成CADGenerates dimensionally exact CadQuery CAD from natural language using the CADSmith plan-code-validate-refine loop. Use when the user describes a part in words and wants a CAD model.
- OpenFOAM CFD仿真自动搭建Sets up, runs, diagnoses, and reports OpenFOAM CFD cases from a plain-language request using registered flow families and deterministic accept/reject validators. Use for guided OpenFOAM case setup.
- 机械设计评审文档汇编Assembles a mechanical design-review package: requirements traceability, design FMEA with RPN, costed multi-level BOM, risk register, and a PDR/CDR checklist. Use when preparing a design review.
- 面向制造的可制造性评审Reviews a part or assembly for CNC machining, sheet metal, injection molding, casting, or 3D printing manufacturability, flagging rule violations. Use when the user asks for a DFM/DFMA check.
- 工程图纸与GD&T审查Reviews mechanical drawings (PDF, image, or DXF) for dimensioning errors, GD&T misuse, datum problems, and ASME Y14.5/ISO GPS compliance. Use when checking a drawing before release.
- 工程计算报告生成Turns engineering calculations or scripts into a formal calculation report with objective, assumptions, equations, and unit-checked results. Use for a calc report ready for sign-off.
- LLM-SR方程发现Discovers interpretable equations from engineering data with the LLM-SR loop: skeleton proposals, constant fitting, and out-of-domain scoring. Use for symbolic regression on experimental data.
- 疲劳断裂寿命分析Estimates fatigue life and crack-growth life for metal parts from S-N data, load histories, and fracture-mechanics inputs. Use for Miner’s-rule damage, rainflow counting, or Paris-law crack growth.
- 点阵结构刚度逆向设计Designs 3D-printable lattice unit cells for a target stiffness using TPMS cells, printability checks, and voxel homogenization. Use for lattice infill or metamaterial design.
- 平面连杆机构综合Synthesizes planar four-bar or six-bar linkages whose end-effector traces a target curve, using graph-based topology and forward-kinematics search. Use for mechanism path-generation problems.
- LLM驱动FDM打印逐层监控Monitors an FDM print layer by layer through Klipper/Moonraker, diagnosing defects from camera images and applying safety-bounded G-code corrections. Use to watch or fix a live 3D print.
- LLM迭代桁架优化设计Designs and optimizes 2D trusses with an LLM-in-the-loop FEM workflow where proposed members are scored by an exact truss FEM. Use for iterative truss topology or sizing optimization.
- L-PBF缺陷区间预测Predicts L-PBF defect regime (keyholing, lack of fusion, balling, or none) from process parameters and checks melt-pool dimensions against standard criteria. Use when selecting LPBF parameters.
- L-PBF熔池图像超分辨率Upscales low-cost webcam images of an L-PBF build plate to high resolution via registration and a trained diffusion or CNN model. Use for in-situ L-PBF monitoring with cheap cameras.
- 机械零件强度校核Sizes and checks machine elements: bolted joints, shafts for fatigue, bearings for L10 life, springs, welds, and gears, with shown work and safety factors. Use to size or verify a machine element.
- Ashby材料选型Selects engineering materials with the Ashby method: translate function and constraints into a performance index, then screen and rank a shortlist. Use when choosing between candidate materials.
- 产品逆向拆解分析Reverse-engineers a physical product as an engineering system: function structure, costed BOM, DFA index, should-cost, FMEA, and a printable HTML report. Use when asked to tear down a product.
- 力学教学图绘制Produces mechanics teaching figures such as Mohr’s circle, shear/moment diagrams, S-N curves, and free-body diagrams as PNG/SVG. Use when asked to draw or plot a mechanics concept.
- 增材制造熔池几何预测Predicts metal AM melt-pool depth, width, length, and mode (keyhole, lack of fusion, balling, desirable) from laser power, speed, and beam size. Use for LPBF parameter prediction.
- 自然语言参数化CAD建模Turns a plain-English or dimensioned part description into a parametric CadQuery script and exports STEP, STL, and a mass/volume report. Use when asked to model or generate a CAD part.
- FreeCAD自然语言建模Generates FreeCAD models from natural-language queries using the Query2CAD self-refinement loop: macro generation, error repair, and image-text scoring. Use for text-to-CAD in FreeCAD.
常见问题
图像直接生成FDM G代码能做什么?
Converts a photo, sketch, or slice image of a flat or near-flat part directly into FDM G-code without CAD, via silhouette and toolpath extraction. Use for sketch-to-print without modeling。
如何安装图像直接生成FDM G代码?
在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「图像直接生成FDM G代码」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。
图像直接生成FDM G代码需要哪些权限?
该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。
图像直接生成FDM G代码经过官方审核吗?
是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。