中药材分子鉴定
tcm-dna-barcoding-authentication用ITS2等DNA条形码鉴定药材基原物种,处理多基原与降解样品局限。适用于药材真伪鉴别研究,不替代法定检验。
榜单 / 最新上架
按更新时间排列的科研 Skill:新收录的工作流和刚发布新版本的 Skill 都在这里,每次更新都会生成新的版本与内容摘要。
用ITS2等DNA条形码鉴定药材基原物种,处理多基原与降解样品局限。适用于药材真伪鉴别研究,不替代法定检验。
用TCMSP等数据库构建成分-靶点-通路网络并做富集分析,批判性讨论方法学局限。适用于中药机制假设生成与论文方法复核。
建立中医药术语与WHO/ICD-11标准的映射,设计本体并用Neo4j构建知识图谱。适用于数据整合与科研检索,不作临床决策系统。
对方剂做药名规范化、关联规则与网络聚类分析,发现候选核心药组。适用于用药规律挖掘,结果仅为待验证假设,不作处方依据。
对症状量表数据做术语规范、潜在类别与因子分析,探索统计学证候模式。适用于证候分型研究,结果不用于个体辨证诊断。
Calculates thermodynamic properties and mixture phase behavior for pump applications using the thermo Python library’s DIPPR/NIST correlations. Use for VLE or mixture property calculations.
建立HPLC指纹图谱、PCA/OPLS-DA判别分析与含量测定方法学验证。适用于中药材质量标准研究与产地批次差异分析。
制定中英文数据库检索式,按PRISMA筛选、RoB 2评偏倚、GRADE定证据等级。适用于中医药临床研究的系统评价与Meta分析。
Guides selection and configuration of CFD turbulence models (k-epsilon, k-omega SST, LES) based on flow regime and accuracy needs. Use when choosing a turbulence model for a CFD case.
Converts flow rates, pressures, viscosities, and other engineering units with dimensional-consistency checking via the Pint library. Use for quick, checked unit conversions.
整理中医古籍版本、校勘与方剂出处考证,产出可溯源文献证据表。适用于经典名方考证、学术源流梳理,不提供临床诊疗建议。
Designs complete piping systems including controls and parallel/series pump configurations against operating-parameter requirements. Use when integrating a pump into a full system design.
Analyzes thermodynamic cycles, energy and entropy balances, and heat transfer in pump and fluid systems. Use for cycle, efficiency, or temperature-rise calculations.
Creates interactive 3D visualizations of CFD results and pump geometry, including velocity fields, pressure contours, and streamlines, using PyVista. Use for 3D CFD result visualization.
Derives and solves fluid dynamics and pump equations symbolically with SymPy, including simplification and calculus. Use when an equation needs symbolic manipulation before numeric use.
Guides FEA of pump casings and impellers under fluid loads: geometry simplification, material assignment, and critical-region identification. Use for structural analysis of pump components.
Applies scipy.optimize methods, including constrained, global, and multi-objective optimization, to engineering design problems. Use when a design problem needs numerical optimization.
Walks a decision tree for selecting pump type (centrifugal, mixed/axial flow, or positive displacement) based on flow, head, and fluid properties. Use early in pump selection before detailed design.
Generates and interprets pump H-Q/efficiency/power/NPSH curves, applies affinity laws, and predicts off-design performance. Use for pump curve analysis.
Designs and analyzes gear, piston, and screw positive-displacement pumps, including volumetric efficiency and slip. Use when the pump is positive-displacement rather than centrifugal.
Maximizes pump efficiency through hydraulic design changes and operational strategies such as trimming, VFD control, and system matching. Use when a pump is running inefficiently.
Accesses manufacturer pump curves and specifications from Grundfos, KSB, and other vendor databases. Use when selecting a pump from a specific manufacturer’s catalog.
Looks up loss coefficients (K-values) and equivalent lengths for pipes, valves, and fittings in pump and piping systems. Use when computing system head loss.
Accesses atmospheric property profiles and standard-atmosphere models from NASA Earthdata for high-altitude and aerospace fluid analysis. Use when a task needs altitude-dependent atmospheric data.
Performs numerical array operations with NumPy: velocity field processing, pump curve interpolation, linear systems, and matrix methods. Use for general numerical computation in engineering code.
Handles engineering units with automatic conversion and dimensional-consistency checking using the Pint library. Use whenever a calculation mixes units or needs unit safety.
Queries high-accuracy thermodynamic and transport properties from the commercial NIST REFPROP database. Use when a calculation needs reference-quality fluid property data and REFPROP is licensed.
Runs and post-processes OpenFOAM CFD simulations with PyFoam, pyvista, and vtk for mesh setup, solver control, and visualization. Use for scripted OpenFOAM workflows outside ParaView.
Models hydraulic piping networks and multi-pump systems as graphs using NetworkX flow algorithms. Use for analyzing flow distribution across a branched or looped piping network.
Computes pipe flow, pump sizing, friction factor, and compressible flow results with the fluids Python package. Use for quick, code-based fluid mechanics calculations.
Creates professional engineering plots such as pump performance curves, CFD velocity contours, and publication-quality figures with matplotlib. Use when a result needs a plotted figure.
Looks up temperature-dependent fluid viscosities, densities, and other material properties for pump and heat-transfer calculations. Use when a calculation needs property data at a given temperature.
Enumerates installed Python packages, databases, and simulation tools available in the current environment. Use at the start of a session to avoid recommending unavailable tools.
Computes quick fluid property estimates (density, viscosity, vapor pressure) from empirical correlations without needing a database. Use for fast order-of-magnitude property checks.
Queries thermodynamic and transport properties for 100+ pure and pseudo-pure fluids via the CoolProp library. Use when a calculation needs fluid density, viscosity, or enthalpy data.
Sets up a Python session with engineering constants, Pint units, and plotting defaults. Use at the start of a calculation session.
Guides a systematic fluid dynamics analysis from problem setup and domain definition through model selection to validation. Use when planning a CFD or analytical fluid mechanics study end to end.
Handles common numerical errors in fluid calculations, such as division by zero and out-of-range physical values, with validation checks. Use when fluid code fails or returns unphysical results.
基于事件数据构建xG模型与篮球回合效率指标,评估表现指标信度与稳定性。适用于足球篮球等团队项目战术绩效研究。
处理GPS/IMU原始导出数据,定义速度区间与加减速事件阈值并评估设备一致性。适用于外部负荷研究与设备效度信度研究。
Sets up coupled fluid-structure interaction simulations in COMSOL Multiphysics, focused on pump vibration analysis. Use when a user wants to script or automate a COMSOL FSI model.
Looks up vapor pressure, NPSHr data, and correlations for cavitation risk assessment in pumps. Use when cavitation-analysis needs reference property or NPSHr data.
Designs centrifugal pumps from first principles using Euler equations, velocity triangles, and specific speed. Use for impeller sizing or new centrifugal pump design.
规范采集sRPE/TRIMP负荷指标并拟合Banister模型,审慎讨论ACWR方法学争议。适用于负荷-表现与负荷-伤病关联研究。
Runs Cantera combustion simulations: flame temperature, ignition delay, laminar flame speed, PSR. Use for mechanism-based combustion analysis tasks.
Calculates NPSHa and NPSHr and assesses cavitation risk for centrifugal pumps, with prevention and detection guidance. Use when sizing suction piping or diagnosing pump cavitation.
Automates ANSYS Fluent CFD setup, meshing, and batch runs via Python scripting, journal files, and the PyAnsys ecosystem. Use when a user wants to script or automate an ANSYS Fluent simulation.
Maps impervious surfaces, NDVI urban heat islands, building footprints, and land-use change from satellite imagery. Use for urban remote-sensing or land-cover research.