科研 Skill
FDM增材制造可制造性设计
agentscad-fdm-dfam
Checks an existing STEP part for FDM printability with the AgentsCAD method: overhang detection, reorientation, chamfers, and kernel plus visual verification. Use for DFAM review before 3D printing.
SKILL.md
AgentsCAD: DFAM for FDM parts
Paper: E. George, C. Keefe, P. Pak, A. Barati Farimani, AgentsCAD: Automated Design for Manufacturing of FDM Parts via Multi-Agent LLM Reasoning and Geometric Feature Recognition, arXiv:2607.02448.
This is a blackboard pipeline. Deterministic phases (parse, overhang detection, adjacency, modification, re-check) are code. You are the Design Reasoner, and you must ground every rotation in tool output. The paper's ablation found that without the orientation tools the agent hallucinated rotation angles every time, and with them those errors disappeared.
Setup: pip install cadquery pyvista numpy. D = scripts/dfam.py.
Workflow
- Parse to the blackboard.
python $D analyze part.step --out bb.jsonbb.jsonholds per-face type, area, centroid, normal or axis, tilt angles, radius of gyration, elongation index, thelinksadjacency list, rule-basedfeature_hints(a light stand-in for the paper's GraphSAGE labels),overhangs, and a summary. Overhangs are flagged by rule (more than 45° from vertical facing down, not on the bed; horizontal bores by the downward-facing fraction of their sampled normals). If the summary shows 0 actionable overhangs, say so and stop. The paper skips the modifier and verifier in that case. - Recall similar parts (RAG memory, optional):
python $D memory query --bb bb.json --store dfam_memory.jsonl. - Reason in the mandatory order in
references/reasoner_rules.md: reorient → local modifications → supports → split.python $D candidates part.step # scripted orientation sub-phase, ≤4 candidates, ranked python $D lay part.step --face 3 # exact rx/ry to put face 3 on the bed + overhangs after python $D orient part.step --rx 90 # check any rotation you consider - Write
mods.json(typed operations by original face ID, reorient last) and apply it:python $D modify part.step --plan mods.json --out part_dfam.step - Verify.
This checks kernel validity, a single solid, volume Δ%, and re-checks overhangs.python $D verify part.step part_dfam.step --plan mods.json --out verifypass_deterministicmust be true. Then answer the generated yes/novlm_questionsfromverify_4view.png, one per modification plus the integrity questions. Use an independent subagent for this when possible; the paper used a separate VLM. Treat "unclear" honestly: low render resolution isn't a defect, but say so. - Report: a human-readable table of each overhang (face, kind, angle), the action taken and why, the before/after summary, volume Δ, the final orientation (bed face, rx/ry), the render, and any function caveats (for example, a teardropped bore that locates a shaft). Store the outcome with
python $D memory add --bb bb.json --decision mods.json --note "<lesson>".
Worked reference (the paper's birdhouse)
A nine-face birdhouse with two horizontal bores (−90°). Laying end face 3 on the bed makes the entrance bore vertical; the Ø8 perch hole stays horizontal → teardrop. Result: actionable overhangs 2 → 0, a valid single solid, volume −0.17%, faces 9 → 11. See docs/tutorials/agentscad-fdm-dfam.md in the repo.
Limits
Single parts, no assemblies. The GraphSAGE feature classifier isn't bundled (the weights weren't released), so rule hints stand in for it. Very large parts strain the context window: summarize faces by type, keeping only flagged faces and their neighbours.
示例提示词
这个STEP支架用FDM打印总翘边,帮我自动检测悬垂面并加teardrop和圆角修正。
所属插件
安装该插件会一并获得同领域的 35 个 Skill / MCP。
同插件的其他科研 Skill
- 激光粉末床合金可打印性筛选Screens metal alloy compositions for laser powder bed fusion printability using CALPHAD or built-in thermophysical data and Rosenthal melt pools. Use when choosing or qualifying an AM alloy.
- 增材制造文献问答检索Answers additive-manufacturing questions from the user’s own PDF library with page-cited evidence via retrieval. Use for literature-grounded AM questions instead of relying on memory.
- CADSmith文本生成CADGenerates dimensionally exact CadQuery CAD from natural language using the CADSmith plan-code-validate-refine loop. Use when the user describes a part in words and wants a CAD model.
- OpenFOAM CFD仿真自动搭建Sets up, runs, diagnoses, and reports OpenFOAM CFD cases from a plain-language request using registered flow families and deterministic accept/reject validators. Use for guided OpenFOAM case setup.
- 机械设计评审文档汇编Assembles a mechanical design-review package: requirements traceability, design FMEA with RPN, costed multi-level BOM, risk register, and a PDR/CDR checklist. Use when preparing a design review.
- 面向制造的可制造性评审Reviews a part or assembly for CNC machining, sheet metal, injection molding, casting, or 3D printing manufacturability, flagging rule violations. Use when the user asks for a DFM/DFMA check.
- 工程图纸与GD&T审查Reviews mechanical drawings (PDF, image, or DXF) for dimensioning errors, GD&T misuse, datum problems, and ASME Y14.5/ISO GPS compliance. Use when checking a drawing before release.
- 工程计算报告生成Turns engineering calculations or scripts into a formal calculation report with objective, assumptions, equations, and unit-checked results. Use for a calc report ready for sign-off.
- LLM-SR方程发现Discovers interpretable equations from engineering data with the LLM-SR loop: skeleton proposals, constant fitting, and out-of-domain scoring. Use for symbolic regression on experimental data.
- 疲劳断裂寿命分析Estimates fatigue life and crack-growth life for metal parts from S-N data, load histories, and fracture-mechanics inputs. Use for Miner’s-rule damage, rainflow counting, or Paris-law crack growth.
- 图像直接生成FDM G代码Converts a photo, sketch, or slice image of a flat or near-flat part directly into FDM G-code without CAD, via silhouette and toolpath extraction. Use for sketch-to-print without modeling.
- 点阵结构刚度逆向设计Designs 3D-printable lattice unit cells for a target stiffness using TPMS cells, printability checks, and voxel homogenization. Use for lattice infill or metamaterial design.
- 平面连杆机构综合Synthesizes planar four-bar or six-bar linkages whose end-effector traces a target curve, using graph-based topology and forward-kinematics search. Use for mechanism path-generation problems.
- LLM驱动FDM打印逐层监控Monitors an FDM print layer by layer through Klipper/Moonraker, diagnosing defects from camera images and applying safety-bounded G-code corrections. Use to watch or fix a live 3D print.
- LLM迭代桁架优化设计Designs and optimizes 2D trusses with an LLM-in-the-loop FEM workflow where proposed members are scored by an exact truss FEM. Use for iterative truss topology or sizing optimization.
- L-PBF缺陷区间预测Predicts L-PBF defect regime (keyholing, lack of fusion, balling, or none) from process parameters and checks melt-pool dimensions against standard criteria. Use when selecting LPBF parameters.
- L-PBF熔池图像超分辨率Upscales low-cost webcam images of an L-PBF build plate to high resolution via registration and a trained diffusion or CNN model. Use for in-situ L-PBF monitoring with cheap cameras.
- 机械零件强度校核Sizes and checks machine elements: bolted joints, shafts for fatigue, bearings for L10 life, springs, welds, and gears, with shown work and safety factors. Use to size or verify a machine element.
- Ashby材料选型Selects engineering materials with the Ashby method: translate function and constraints into a performance index, then screen and rank a shortlist. Use when choosing between candidate materials.
- 产品逆向拆解分析Reverse-engineers a physical product as an engineering system: function structure, costed BOM, DFA index, should-cost, FMEA, and a printable HTML report. Use when asked to tear down a product.
- 力学教学图绘制Produces mechanics teaching figures such as Mohr’s circle, shear/moment diagrams, S-N curves, and free-body diagrams as PNG/SVG. Use when asked to draw or plot a mechanics concept.
- 增材制造熔池几何预测Predicts metal AM melt-pool depth, width, length, and mode (keyhole, lack of fusion, balling, desirable) from laser power, speed, and beam size. Use for LPBF parameter prediction.
- 自然语言参数化CAD建模Turns a plain-English or dimensioned part description into a parametric CadQuery script and exports STEP, STL, and a mass/volume report. Use when asked to model or generate a CAD part.
- FreeCAD自然语言建模Generates FreeCAD models from natural-language queries using the Query2CAD self-refinement loop: macro generation, error repair, and image-text scoring. Use for text-to-CAD in FreeCAD.
常见问题
FDM增材制造可制造性设计能做什么?
Checks an existing STEP part for FDM printability with the AgentsCAD method: overhang detection, reorientation, chamfers, and kernel plus visual verification. Use for DFAM review before 3D printing。
如何安装FDM增材制造可制造性设计?
在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「FDM增材制造可制造性设计」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。
FDM增材制造可制造性设计需要哪些权限?
该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。
FDM增材制造可制造性设计经过官方审核吗?
是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。