科研 Skill

Ashby材料选型

material-selection

Selects engineering materials with the Ashby method: translate function and constraints into a performance index, then screen and rank a shortlist. Use when choosing between candidate materials.

发布者 Codar安全审核通过v0.1.0更新于 2026-11-18

SKILL.md

Material Selection (Ashby method)

Workflow

  1. Translate the design into four items and write them down:
    • Function (tie, beam, panel, spring, hinge, heat spreader…)
    • Constraints, both hard (service temp, min strength, corrosion, food-safe) and geometric (fixed length, fixed width)
    • Objective (minimize mass, cost, or volume)
    • Free variable (usually section size or thickness)
  2. Pick the performance index. Use the table in references/indices.md. If the case isn't listed, derive it: write the objective, eliminate the free variable using the constraint equation, and group the material properties. Show this derivation in 3–4 lines.
  3. Run the screen and rank:
    python scripts/rank_materials.py --index stiff-beam --Tmin 80 --exclude ceramic --top 8 --out sel
    python scripts/rank_materials.py --index stiff-beam --minimize-cost --top 8 --out sel_cost
    
    Run both the mass and the cost version unless the user cares about only one.
  4. Apply judgment the index can't capture: manufacturability at the expected volume, joining, corrosion, availability, fatigue behaviour, anisotropy (CFRP UD), and brittleness (ceramics, cast iron). Cut the list to 3 candidates.
  5. Report: function/constraints/objective table → index derivation → ranked table (relative index, cost/kg) → chart sel_chart.png → recommendation with runner-up and the trade-off between them.

Notes

  • The database (references/materials.csv) holds typical mid-range values for screening. Before final design, use supplier datasheets or MMPDS values.
  • Users can add rows to the CSV. Keep its units: GPa, kg/m³, MPa, $/kg.

示例提示词

帮我用Ashby方法从几种材料里选出最轻且满足刚度要求的那个。

所属插件

机械设计与先进制造面向机械设计与制造研究:文本/草图生成 CAD、FreeCAD/SolidWorks 参数化建模、机构综合与零件选型、公差与 GD&T、DFM 与设计评审、快速有限元与应力代理模型、增材制造工艺与缺陷预测、疲劳断裂寿命。

安装该插件会一并获得同领域的 35 个 Skill / MCP。

同插件的其他科研 Skill

常见问题

Ashby材料选型能做什么?

Selects engineering materials with the Ashby method: translate function and constraints into a performance index, then screen and rank a shortlist. Use when choosing between candidate materials。

如何安装Ashby材料选型?

在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「Ashby材料选型」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。

Ashby材料选型需要哪些权限?

该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。

Ashby材料选型经过官方审核吗?

是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。