科研 Skill

工程图纸与GD&T审查

drawing-gdt-review

Reviews mechanical drawings (PDF, image, or DXF) for dimensioning errors, GD&T misuse, datum problems, and ASME Y14.5/ISO GPS compliance. Use when checking a drawing before release.

发布者 Codar安全审核通过v0.1.0更新于 2026-11-18

SKILL.md

Drawing & GD&T Review

Workflow

  1. Ingest. Render PDF pages to PNG at 200+ dpi (pdftoppm -r 200 -png drawing.pdf page) and view each one. For DXF, list the entities with ezdxf. Zoom into the title block, the notes, and each view.
  2. Identify the standard: ASME Y14.5-2018 or ISO 1101 / ISO 8015 (look for "ISO 8015" or a projection symbol in the title block). Also note the projection type (first or third angle). All later judgments depend on this.
  3. Understand function first. In 2–3 lines, write what the part does and which features mate with other parts. GD&T should control those features. Ask about function only if you can't infer it.
  4. Run the checklist in references/checklist.md, section by section. For each finding, record the location (sheet / view / zone), the issue, the severity, and the fix. Severity scale:
    • Critical: the part can't be made or inspected as drawn, or the drawing contradicts itself.
    • Major: ambiguous, so a supplier could legally make a non-functional part.
    • Minor: a standards or style deviation.
    • Suggestion: a cost-reduction or clarity improvement.
  5. GD&T sanity rules (the most common errors):
    • Datum features must be physical, stable, and functional. The primary datum should constrain 3 degrees of freedom on mating parts.
    • Position needs basic dimensions to the datums. ± dimensions on a positioned feature are a Critical error.
    • Datum references go in precedence order (A|B|C), and the order must match the part's assembly order.
    • MMC (Ⓜ) applies only to features of size. Using it on a planar surface is an error.
    • Flatness or straightness tolerance must be tighter than the size tolerance (Rule #1, Y14.5).
    • Profile without datums controls form only. Check whether location was intended.
    • Runout and concentricity: Y14.5-2018 removed concentricity and symmetry. Recommend position or profile instead.
  6. Tolerance reasonableness. Flag tolerances tighter than the process can hold (see dfm-review's process tables), and tolerances that are loose on mating features.
  7. Output: a table sorted by severity, then a short summary (counts by severity and the top 3 fixes). If asked for a red-line, annotate the page PNG with numbered balloons (PIL) that match the table rows.

示例提示词

帮我审查这张机械图纸的GD&T标注是否符合ASME Y14.5标准。

所属插件

机械设计与先进制造面向机械设计与制造研究:文本/草图生成 CAD、FreeCAD/SolidWorks 参数化建模、机构综合与零件选型、公差与 GD&T、DFM 与设计评审、快速有限元与应力代理模型、增材制造工艺与缺陷预测、疲劳断裂寿命。

安装该插件会一并获得同领域的 35 个 Skill / MCP。

同插件的其他科研 Skill

常见问题

工程图纸与GD&T审查能做什么?

Reviews mechanical drawings (PDF, image, or DXF) for dimensioning errors, GD&T misuse, datum problems, and ASME Y14.5/ISO GPS compliance. Use when checking a drawing before release。

如何安装工程图纸与GD&T审查?

在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「工程图纸与GD&T审查」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。

工程图纸与GD&T审查需要哪些权限?

该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。

工程图纸与GD&T审查经过官方审核吗?

是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。