科研 Skill

面向制造的可制造性评审

dfm-review

Reviews a part or assembly for CNC machining, sheet metal, injection molding, casting, or 3D printing manufacturability, flagging rule violations. Use when the user asks for a DFM/DFMA check.

发布者 Codar安全审核通过v0.1.0更新于 2026-11-18

SKILL.md

DFM / DFA Review

Workflow

  1. Context. Find out the process (or pick one), annual volume, material, and critical functions. If the process isn't given, recommend one with references/process_select.md before reviewing.
  2. Get the geometry facts. From a STEP file, measure with CadQuery: bounding box, minimum wall (sample with ray casts or offset tests), hole diameters and depths, internal corner radii, face normals (for undercuts and draft), and the number of distinct setup directions. From a drawing or images, read them off and list what you couldn't measure.
  3. Apply the rules for that process in references/rules.md. For every violation, give: Feature | Rule | Measured | Limit | Impact (cost/quality/infeasible) | Fix.
  4. Cost drivers. Rank the top 3: setups and orientations, tight tolerances, deep pockets or small tools, secondary operations, scrap rate, tooling complexity (side actions, lifters).
  5. DFA (for assemblies): count parts, mark each one as theoretically necessary or not (Boothroyd: does it move relative to others, does it need a different material, must it be separate for assembly or service?), and give the DFA index = 3 × N_min / total assembly time estimate. Suggest part consolidations and snap-fits in place of fasteners.
  6. Output: verdict (manufacturable as-is / with changes / wrong process) → violations table sorted by impact → cost-driver list → redesign suggestions with before/after sketches or CadQuery edits when useful.

Principles

  • Every suggestion must keep the function. If a change trades off function, say so.
  • Give numbers ("increase R0.5 to R3 so a Ø6 end mill can reach"), not general advice.
  • Volume changes the answer: at 10 parts, CNC beats molding even with ugly geometry.

示例提示词

这个注塑件壁厚不均匀,帮我做一次可制造性审查并给出改进建议。

所属插件

机械设计与先进制造面向机械设计与制造研究:文本/草图生成 CAD、FreeCAD/SolidWorks 参数化建模、机构综合与零件选型、公差与 GD&T、DFM 与设计评审、快速有限元与应力代理模型、增材制造工艺与缺陷预测、疲劳断裂寿命。

安装该插件会一并获得同领域的 35 个 Skill / MCP。

同插件的其他科研 Skill

常见问题

面向制造的可制造性评审能做什么?

Reviews a part or assembly for CNC machining, sheet metal, injection molding, casting, or 3D printing manufacturability, flagging rule violations. Use when the user asks for a DFM/DFMA check。

如何安装面向制造的可制造性评审?

在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「面向制造的可制造性评审」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。

面向制造的可制造性评审需要哪些权限?

该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。

面向制造的可制造性评审经过官方审核吗?

是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。