科研 Skill
3D打印高功率火箭设计
rocketsmith
Designs 3D-printed hobby high-power rockets (certified commercial motors only): airframe and fin geometry, Barrowman stability, and 1D flight simulation. Use for hobby rocket design.
SKILL.md
RocketSmith: design for AM of high-power rockets
RocketSmith (Pak et al., arXiv:2606.00097, 2026) designed four FDM-printed high-power rockets. All four launched stably and two were recovered reflyable. Altimeter apogees came in at 80–84% of the predictions.
Its key idea: the LLM orchestrates and every number comes from a tool, because LLMs that iterate
numbers themselves plateau. scripts/rocket.py provides those tools. It needs numpy and matplotlib,
plus CadQuery for parts. Details and the paper's flight data are in references/paper-notes.md.
Scope and safety. This skill covers airframe design for certified commercial motors within the flyer's certification:
- H–I motors need L1 and J–L need L2; Class 2 ends at 40,960 N·s total impulse.
- Motor, propellant, igniter and ejection-charge design or sizing are out of scope. Point users to the motor manufacturer, their certification and the Range Safety Officer.
- Every design is a candidate for review, never a go-for-launch.
Workflow (mirrors RocketSmith's skills)
- Motor selection.
- Use the manufacturer's RASP
.engfile from thrustcurve.org (--eng). motorslists the built-in certification summaries for the paper's motors, H100W and J425R.- Check that the motor letter matches the user's certification level.
- Use the manufacturer's RASP
- Design in
design.json, with the nose cone, body segments, fins, internal masses and print settings. Size parts to the user's printer build volume (the paper split HP2 into three parts to fit an Ender 3 and an Ender 5 Plus). - Stability analysis:
- Run
check design.jsonfor CG and CP, stability at liftoff and burnout, rail-exit speed, thrust-to-weight, Mach and descent rate. - If stability is out of range,
fins design.json --target 1.25 [--lever span_mm|root_mm|tip_mm] --out sized.jsonresizes the fins. When fins can't reach the target, move mass forward (avionics bay, nose weight) or lengthen the airframe.
- Run
- Predict the flight:
simulate sized.json --plot flight.png [--cd 0.55 --rail 1.83].- Use Cd 0.45–0.55 for smooth airframes.
- Printed rockets flew at Cd ≈ 0.8 in the paper's data. Say which value you used.
- Generate structures:
cad sized.json --out parts/writes the nose cone (ogive or other shape, with shoulder) and the fin can (tube, fins and an integrated motor mount), as STEP and STL.- Then add the details the paper's agent added on request: shear-pin and heat-insert pilot holes,
eyebolt holes, rail-button bosses, avionics slots. Use
cadsmith-text-to-cador edit the CadQuery code. - Print in PETG or ABS, not PLA (heat). Use 4–5 walls, gyroid infill and 0.2 mm layers.
- Then add the details the paper's agent added on request: shear-pin and heat-insert pilot holes,
eyebolt holes, rail-button bosses, avionics slots. Use
- Mass calibration: slice the parts, weigh them after printing, then
calibrate design.json --weighed nose=412,fincan=1265 [--cg 520]. Re-check stability with the real masses; the paper's stability shifted with every manufactured part. - After flight:
calibrate design.json --weighed "" --apogee 276fits the airframe's real Cd for the next prediction.
Review checklist to hand the user (from the paper's failures)
- HP1: the eyebolt pulled out of the printed baffle and the lower airframe split. Make baffles and anchor points stronger than the printed walls, or anchor to the motor mount.
- HP2: the recovery bay didn't separate. Check shear-pin count against separation force, and check the fit.
- HP3: a friction-fit nose cone worked, at lower ejection resistance.
- Weathercocking: stability much above 2 cal in wind costs altitude and drift.
Cite: Pak et al., RocketSmith, arXiv:2606.00097 (2026).
示例提示词
帮我设计一枚3D打印的高功率模型火箭并估算它的最大高度。
所属插件
安装该插件会一并获得同领域的 35 个 Skill / MCP。
同插件的其他科研 Skill
- FDM增材制造可制造性设计Checks an existing STEP part for FDM printability with the AgentsCAD method: overhang detection, reorientation, chamfers, and kernel plus visual verification. Use for DFAM review before 3D printing.
- 激光粉末床合金可打印性筛选Screens metal alloy compositions for laser powder bed fusion printability using CALPHAD or built-in thermophysical data and Rosenthal melt pools. Use when choosing or qualifying an AM alloy.
- 增材制造文献问答检索Answers additive-manufacturing questions from the user’s own PDF library with page-cited evidence via retrieval. Use for literature-grounded AM questions instead of relying on memory.
- CADSmith文本生成CADGenerates dimensionally exact CadQuery CAD from natural language using the CADSmith plan-code-validate-refine loop. Use when the user describes a part in words and wants a CAD model.
- OpenFOAM CFD仿真自动搭建Sets up, runs, diagnoses, and reports OpenFOAM CFD cases from a plain-language request using registered flow families and deterministic accept/reject validators. Use for guided OpenFOAM case setup.
- 机械设计评审文档汇编Assembles a mechanical design-review package: requirements traceability, design FMEA with RPN, costed multi-level BOM, risk register, and a PDR/CDR checklist. Use when preparing a design review.
- 面向制造的可制造性评审Reviews a part or assembly for CNC machining, sheet metal, injection molding, casting, or 3D printing manufacturability, flagging rule violations. Use when the user asks for a DFM/DFMA check.
- 工程图纸与GD&T审查Reviews mechanical drawings (PDF, image, or DXF) for dimensioning errors, GD&T misuse, datum problems, and ASME Y14.5/ISO GPS compliance. Use when checking a drawing before release.
- 工程计算报告生成Turns engineering calculations or scripts into a formal calculation report with objective, assumptions, equations, and unit-checked results. Use for a calc report ready for sign-off.
- LLM-SR方程发现Discovers interpretable equations from engineering data with the LLM-SR loop: skeleton proposals, constant fitting, and out-of-domain scoring. Use for symbolic regression on experimental data.
- 疲劳断裂寿命分析Estimates fatigue life and crack-growth life for metal parts from S-N data, load histories, and fracture-mechanics inputs. Use for Miner’s-rule damage, rainflow counting, or Paris-law crack growth.
- 图像直接生成FDM G代码Converts a photo, sketch, or slice image of a flat or near-flat part directly into FDM G-code without CAD, via silhouette and toolpath extraction. Use for sketch-to-print without modeling.
- 点阵结构刚度逆向设计Designs 3D-printable lattice unit cells for a target stiffness using TPMS cells, printability checks, and voxel homogenization. Use for lattice infill or metamaterial design.
- 平面连杆机构综合Synthesizes planar four-bar or six-bar linkages whose end-effector traces a target curve, using graph-based topology and forward-kinematics search. Use for mechanism path-generation problems.
- LLM驱动FDM打印逐层监控Monitors an FDM print layer by layer through Klipper/Moonraker, diagnosing defects from camera images and applying safety-bounded G-code corrections. Use to watch or fix a live 3D print.
- LLM迭代桁架优化设计Designs and optimizes 2D trusses with an LLM-in-the-loop FEM workflow where proposed members are scored by an exact truss FEM. Use for iterative truss topology or sizing optimization.
- L-PBF缺陷区间预测Predicts L-PBF defect regime (keyholing, lack of fusion, balling, or none) from process parameters and checks melt-pool dimensions against standard criteria. Use when selecting LPBF parameters.
- L-PBF熔池图像超分辨率Upscales low-cost webcam images of an L-PBF build plate to high resolution via registration and a trained diffusion or CNN model. Use for in-situ L-PBF monitoring with cheap cameras.
- 机械零件强度校核Sizes and checks machine elements: bolted joints, shafts for fatigue, bearings for L10 life, springs, welds, and gears, with shown work and safety factors. Use to size or verify a machine element.
- Ashby材料选型Selects engineering materials with the Ashby method: translate function and constraints into a performance index, then screen and rank a shortlist. Use when choosing between candidate materials.
- 产品逆向拆解分析Reverse-engineers a physical product as an engineering system: function structure, costed BOM, DFA index, should-cost, FMEA, and a printable HTML report. Use when asked to tear down a product.
- 力学教学图绘制Produces mechanics teaching figures such as Mohr’s circle, shear/moment diagrams, S-N curves, and free-body diagrams as PNG/SVG. Use when asked to draw or plot a mechanics concept.
- 增材制造熔池几何预测Predicts metal AM melt-pool depth, width, length, and mode (keyhole, lack of fusion, balling, desirable) from laser power, speed, and beam size. Use for LPBF parameter prediction.
- 自然语言参数化CAD建模Turns a plain-English or dimensioned part description into a parametric CadQuery script and exports STEP, STL, and a mass/volume report. Use when asked to model or generate a CAD part.
常见问题
3D打印高功率火箭设计能做什么?
Designs 3D-printed hobby high-power rockets (certified commercial motors only): airframe and fin geometry, Barrowman stability, and 1D flight simulation. Use for hobby rocket design。
如何安装3D打印高功率火箭设计?
在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「3D打印高功率火箭设计」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。
3D打印高功率火箭设计需要哪些权限?
该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。
3D打印高功率火箭设计经过官方审核吗?
是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。