科研 Skill

原理图可读性重排

schematic-humanizer

Reorganizes label-heavy or netlist-like schematics into readable functional diagrams while preserving connectivity, across KiCad, Altium, and other EDA sources. Use to fix unclear sheets.

发布者 Codar安全审核通过v0.1.0更新于 2026-11-18

SKILL.md

Schematic Humanizer

Turn an electrically connected but label-heavy schematic into a diagram a human can trace. Preserve the circuit unless the user separately authorizes an electrical change. Readability is not electrical approval.

Establish the adapter

Before editing, read references/adapters.md and define:

  1. Native source of truth, generator, libraries, project rules, and protected PCB/layout artifacts.
  2. Baseline connectivity exporter/parser and its limitations.
  3. Normalization to schematic-connectivity-v1: component identity, named net, and every (reference, pin) membership.
  4. Supported edit path: generator, native API, text format, or controlled GUI.
  5. Renderer and ERC/lint path.
  6. Repeatable post-edit export and exact comparison.

Never call an unverified conversion equivalent. If only PDF/image evidence exists, preserve it, create a companion native drawing, and label electrical equivalence unverified.

Read the mandatory visual audit checklist before editing. Record its result with references/visual-audit-record.md. When layout guidance is requested or placement-sensitive buses, clocks, power, controlled interfaces, RF, or manufacturer rules are obvious, also read layout handoff annotations.

Workflow

  1. Capture baseline. Read repository instructions. Export canonical connectivity and ERC/lint. Record hashes or a clean diff for protected layout files. If a generator owns the schematic, edit the generator. In a generated variant, trace the selected configuration and presentation or placement override into the generator; a defined but unused table is not evidence. In a recorded workflow, also render and preserve the intentionally netlist-style whole schematic before changing its presentation; this is the authoritative “before” frame, not a reconstructed mockup.
  2. Plan functional sheets. Group by real flow: connector/input → protection or translation → processing/control → memory/output. Separate power/reset and repetitive decoupling when useful. Prefer left-to-right flow, power at top, and ground at bottom.
  3. Show local relationships. Draw native wires for nearby connectors, USB, oscillators, MCU support, memory controls, translators, glue, reset/boot, pulls, LEDs, and power chains. Rotate connectors toward the served circuit. Use real buses and entries for repeated address/data groups. Reserve labels mainly for cross-sheet or genuinely long connections.
  4. Enforce drawing hygiene. Never route a wire or bus under a symbol, reference, value, title, note, or unrelated label. Avoid wire-through-pin ambiguity, unintended junctions, four-way crossings, stacked labels, long loops, and crowded bus entries. Use orthogonal grid-aligned routes, visible junctions, consistent entry pitch, and sufficient whitespace.
  5. Render before annotation. Export every sheet to PDF and readable PNG. Inspect whole pages, page edges, and dense crops around large ICs, modules, connectors, memories, buses, reset, and power. Fix every overlap, apparent floating function, reversed flow, clipped item, and avoidable label chain.
  6. Add justified layout guidance. Mark each statement [SPEC], [TARGET], or [TBD-MEASURE]. Capture rate plus edge-rate caveat, topology/stubs, reference plane, skew intent, current allocation, trace/via intent, placement/keepout, and authoritative guidance. Keep calculations and full URLs in a companion document.
  7. Render again. Reinspect every page and changed dense crop after comments. Reject any annotation hiding a wire, bus, pin, reference, value, heading, or dominant signal path.
  8. Prove preservation. Export and normalize final connectivity with the same adapter. Run python scripts/compare_connectivity.py before after; KiCad XML netlists are accepted directly. Require exact identities, net names, and ref/pin memberships, no new ERC/lint findings, and no protected layout changes. After any generator configuration or override-binding change, prove the active variant in a deterministic manifest or sentinel output and repeat exact connectivity comparison; ERC alone is insufficient.

In recorded mode, append separate checkpoints for the raw schematic, humanized all-sheet render, dense-area visual audit, and connectivity proof. Use promotion-safe frames and keep machine reports as hashed outputs. Do not create a fake overlap or electrical fault merely to make the transformation look dramatic.

Completion report

Report adapter, authoritative files, baseline/final counts, comparison result, ERC/lint before and after, protected-file proof, every rendered page/crop inspected, remaining limitations, and the final snapshot. Write .pcba-workflow/schematic-visual-audit.json. Route circuit-design findings to $design-and-review-circuit rather than mixing them into visual approval.

For ready-to-copy user requests, read references/prompt-template.md.

示例提示词

这份原理图全是网表式标签,帮我整理成人能看懂的功能图。

所属插件

电子电气与信息工程面向电气与电子工程研究:电力系统仿真(PSS/E、PSLF、PowerWorld、pandapower、PyPSA、OpenDSS、ANDES)与越限/稳定/短路处置,FPGA 时序收敛与跨时钟域检查,电路与 PCB 设计评审,硬件产品开发流程。

安装该插件会一并获得同领域的 63 个 Skill / MCP。

同插件的其他科研 Skill

常见问题

原理图可读性重排能做什么?

Reorganizes label-heavy or netlist-like schematics into readable functional diagrams while preserving connectivity, across KiCad, Altium, and other EDA sources. Use to fix unclear sheets。

如何安装原理图可读性重排?

在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「原理图可读性重排」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。

原理图可读性重排需要哪些权限?

该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。

原理图可读性重排经过官方审核吗?

是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。