科研 Skill
ANDES电力系统动态仿真
andes
Runs ANDES power-system dynamic studies via PowerMCP: power flow, eigenvalue analysis, and time-domain simulation. Use for damping, stability, or oscillation-mode questions.
SKILL.md
ANDES workflow
Expose ANDES tools in stages. Do not jump into dynamics until the base case is loaded, solved, and understood.
Default tool ladder
run_power_flow(file_path)to load the case and solve the steady-state point.get_system_info()to summarize buses, generators, dynamic states, and controls.run_eigenvalue_analysis(file_path)to screen oscillatory modes and poor damping.run_time_domain_simulation(step_size, t_end)only after the disturbance and success criteria are explicit.
Example sequence
Illustrative run on an ANDES-bundled case:
run_power_flow("ieee14.xlsx") -> base case solved, 14 buses, 5 generators
get_system_info() -> dynamic models, governor and exciter types
run_eigenvalue_analysis("ieee14.xlsx") -> dominant mode 0.42 Hz, damping 3.1%
run_time_domain_simulation(0.01, 10.0) -> generator trip at t=1s, monitor rotor angles
The 3.1% damping is below the ~5% screening threshold, so this case escalates to
dynamic-stability-mitigation rather than stopping at "the modes look weak".
Working rules
- Re-run the base power flow after any model or dispatch change before dynamic work.
- State the disturbance, clearing time, monitored channels, and pass or fail criteria before time-domain runs.
- Treat eigenvalue results as screening. Confirm critical cases in time domain.
Escalation triggers
Quote the failing metric (mode + damping ratio, channel + recovery time) rather than saying "it is unstable".
| Observation | Escalate to |
|---|---|
| Eigenvalue with damping ratio below ~5% or any right-half-plane mode | dynamic-stability-mitigation |
| Time-domain run shows growing angles, sustained oscillations, or failed voltage recovery | dynamic-stability-mitigation |
| Base power-flow voltages outside [0.95, 1.05] pu | voltage-violation-mitigation |
| Frequency nadir, RoCoF, or settling frequency violates its limit after a generation-loss event | frequency-response-mitigation |
Deliver
- The case used and whether the base case solved.
- The dynamic issue being checked.
- The main result and whether mitigation is now required.
示例提示词
帮我用ANDES跑一下这个算例的时域仿真,看看阻尼够不够。
所属插件
安装该插件会一并获得同领域的 63 个 Skill / MCP。
同插件的其他科研 Skill
- 电池选型与电源预算Builds an evidence-tagged power budget and sizes a manufacturable battery with pouch outline, seals, and derating. Use when sizing runtime, mAh, charging, or supply rails.
- FPGA比特流生成与烧录Generates a Xilinx FPGA bitstream and programs it over JTAG, or burns an MCS image into flash for power-on boot. Use when flashing a board or diagnosing boot failures.
- 硬件项目发布包组装Assembles a hardware release package (fab files, BOM/CPL, carts, assembly guide, hashed manifest) and runs a ready-to-build gate. Use before ordering prototypes.
- 时钟域交叉风险审查Audits clock-domain-crossing risk on an FPGA design and applies the smallest safe synchronizer or constraint fix. Use to resolve CDC violations before sign-off.
- 硬件产品认证合规规划Plans certifications a hardware product needs per target market (FCC, CE/RED, UKCA, battery/radio rules), with cost and lead-time estimates. Use before PCB or enclosure tooling.
- Vivado XDC时序约束编写Authors a Vivado XDC timing constraint set from scratch: clocks, I/O delays, and timing exceptions. Use first, before timing closure, on a design with no or incomplete constraints.
- N-1/N-2应急违规处置Playbook for N-1/N-2 contingency violations: ranks contingencies and proposes preventive and corrective actions. Use after a study shows voltage or thermal problems.
- 潮流计算不收敛诊断Playbook for power-flow convergence failures in PSS/E, PSLF, PowerWorld, pandapower, PyPSA, surge, or OpenDSS. Use when a case diverges or fails to solve.
- 硬件成本核算与采购Prices a hardware product at multiple volumes with one-time vs per-unit cost, landed cost per country, and sourcing leads. Use to estimate unit cost before a pitch.
- RTL仿真覆盖率收敛Measures RTL simulation code coverage and iteratively closes it toward a target by adding testbench stimulus. Use for a sign-off-grade coverage report.
- 配电网DER接纳能力治理Playbook for distribution DER hosting-capacity limits: voltage rise, reverse flow, and thermal limits from PV and storage. Use to estimate how much DER a feeder can host.
- 电子电路设计与审查Designs, audits, or corrects an electronic circuit from a brief, schematic, or netlist, checking power domains, reset sequencing, and ratings. Use for circuit review.
- 硬件可制造性红队审查Red-team audit that fix-loops a hardware project to ready-to-build, re-deriving parts, rails, battery physics, and cost. Use for a reality check before committing to a design.
- 电力系统动态稳定处置Playbook for dynamic stability problems: poor damping, angle instability, or sustained oscillations from eigenvalue or time-domain studies. Use after an unstable study result.
- Egret电力市场调度优化Runs Egret market/operations optimization (DC-OPF, AC-OPF, unit commitment) via PowerMCP. Use for cheapest dispatch, unit commitment, or congestion checks.
- 电子元器件选型核查Researches electronic components against primary sources: part numbers, datasheet limits, lifecycle, stock, and price breaks, one dossier per part. Use to verify or source a BOM.
- EMC电磁兼容预测试Plans grounding, shielding, and filtering for EMC/EMI, and runs an emissions pre-scan with a root-cause fix sequence. Use before a lab test or after a failed EMI scan.
- 产品外壳参数化建模Designs a hardware enclosure as parametric CAD with STEP/STL/GLB output, a DFM check, and Blender assembly validation. Use when designing a case or checking fit.
- 电网频率响应问题处置Playbook for frequency problems: low inertia, high RoCoF, weak primary response, or UFLS risk after loss of the largest unit. Use when a study flags frequency issues.
- FPGA RTL到比特流全流程Drives a Xilinx FPGA design end to end through RTL, simulation, synthesis, implementation, and bitstream, gated at every stage. Use to run the complete build flow in one pass.
- 硬件产品全流程总协调Leads a physical electronic product from idea to a doable design, coordinating specs, parts, battery, PCB, enclosure, render, and cost sub-skills. Use starting a hardware product.
- 硬件原理图与BOM审查Reviews hardware projects: checks schematics against datasheets, pin connections, and firmware-to-hardware alignment across KiCad/Altium files. Use for a design alignment check.
- FPGA ILA在线逻辑调试Inserts an Integrated Logic Analyzer, programs the board, arms a trigger, and reads captured waveforms on real FPGA hardware. Use when sim passes but the board fails.
- 新能源并网影响评估Playbook for screening the grid impact of a new generator, storage, or large-load interconnection. Use to check whether a given MW can connect and what upgrades it needs.
常见问题
ANDES电力系统动态仿真能做什么?
Runs ANDES power-system dynamic studies via PowerMCP: power flow, eigenvalue analysis, and time-domain simulation. Use for damping, stability, or oscillation-mode questions。
如何安装ANDES电力系统动态仿真?
在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「ANDES电力系统动态仿真」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。
ANDES电力系统动态仿真需要哪些权限?
该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。
ANDES电力系统动态仿真经过官方审核吗?
是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。