科研 Skill

电网频率响应问题处置

frequency-response-mitigation

Playbook for frequency problems: low inertia, high RoCoF, weak primary response, or UFLS risk after loss of the largest unit. Use when a study flags frequency issues.

发布者 Codar安全审核通过v0.1.0更新于 2026-11-18

SKILL.md

Frequency response mitigation

Start only after the design event and the failing metric are explicit: which contingency, and which of nadir, RoCoF, or settling frequency violates its limit.

Preferred action order

  1. Confirm the study setup is credible: largest credible loss, load-damping assumption, governor models actually enabled and responsive (deadbands, baseload flags), and the inertia of the dispatch being studied.
  2. Increase responsive headroom first: commit or back down units to create governor headroom, and enable fast frequency response from storage, IBRs, or demand response — MW that respond in the first seconds matter most.
  3. Raise inertia where headroom alone is insufficient: additional synchronous units, synchronous condensers (with flywheels where available), and must-run rules for low-inertia hours.
  4. Fix control settings: droop, deadband, and response-withdrawal behavior so primary response is sustained, not transient.
  5. Re-coordinate UFLS last — it is the backstop that protects the system when the fixes above fall short, not the fix itself.

Working rules

  • Evaluate the worst inertia hour (high renewables, light load), not the average dispatch.
  • Screen with system-level metrics, then confirm the critical cases in time domain (ANDES, PSS/E) before claiming the fix works.
  • Track the response trajectory: a good nadir with rapid response withdrawal can still fail the settling-frequency requirement.
  • Frequency containment and oscillation damping are different problems; route poorly damped responses to dynamic-stability-mitigation.

Deliver

  • The design event and the violated metric (nadir, RoCoF, settling frequency) with values.
  • The mitigation sequence: headroom, fast response, inertia, control fixes.
  • The first credible fix and the time-domain validation still needed.

示例提示词

系统惯量不够,频率跌落太深,帮我分析并给出改善方案。

所属插件

电子电气与信息工程面向电气与电子工程研究:电力系统仿真(PSS/E、PSLF、PowerWorld、pandapower、PyPSA、OpenDSS、ANDES)与越限/稳定/短路处置,FPGA 时序收敛与跨时钟域检查,电路与 PCB 设计评审,硬件产品开发流程。

安装该插件会一并获得同领域的 63 个 Skill / MCP。

同插件的其他科研 Skill

常见问题

电网频率响应问题处置能做什么?

Playbook for frequency problems: low inertia, high RoCoF, weak primary response, or UFLS risk after loss of the largest unit. Use when a study flags frequency issues。

如何安装电网频率响应问题处置?

在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「电网频率响应问题处置」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。

电网频率响应问题处置需要哪些权限?

该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。

电网频率响应问题处置经过官方审核吗?

是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。