科研 Skill

PCBA物料选型核验

qualify-pcba-sourcing

Verifies a PCBA BOM before circuit or placement freeze: part numbers, footprints, lifecycle, stock, MOQ, and approved substitutes. Use for sourcing locks or substitutions.

发布者 Codar安全审核通过v0.1.0更新于 2026-11-18

SKILL.md

PCBA Sourcing Qualifier

Create .pcba-workflow/sourcing-lock.csv from assets/sourcing-lock.csv. Stock and price are time-sensitive: browse current primary manufacturer and supplier sources rather than relying on model memory.

Workflow

  1. Read the product brief, architecture, schematic/netlist, BOM, layout, and production quantity. Derive the actual requirement before comparing parts.
  2. For every populated reference, record the exact manufacturer, orderable MPN, supplier part number, package drawing, footprint, physical pin semantics, voltage/current/timing requirements, lifecycle, CAD, and 3D-model status.
  3. Record supplier stock, timestamp, MOQ, price break used, Basic/Extended or equivalent assembly class, per-board and assembled quantities, order quantity, parts cost, setup/extended charges, and reconciled line/total assembled-order cost.
  4. Treat memories, programmable devices, modules, regulators, translators, connectors, sensors, protection, and timing-critical parts as design-critical unless project evidence says otherwise.
  5. For an alternate, read references/substitution-gate.md. Compare every physical pin and package dimension; similar family names or pin counts are not evidence. Record both the requested and selected MPN; a different selected MPN must be listed, explicitly approved, and tied to approval evidence in the sourcing lock.
  6. Classify each line PASS, BLOCKED, or USER_REVIEW. A critical alternate always requires explicit design-owner approval.
  7. Run scripts/validate_sourcing_lock.py with a suitable live-data age limit.

Gate

Do not freeze the circuit or placement while a critical MPN, pinout, package, footprint, CAD model, lifecycle, or current availability remains unresolved. Any selected MPN/package change invalidates the circuit and all downstream artifacts. A stock/price-only refresh invalidates sourcing and order approval; it does not invalidate the circuit when the selected part is unchanged.

Report dated evidence, line and total cost, risk, substitution class, and every unresolved item. Never silently change a released BOM or website match.

示例提示词

冻结BOM之前,帮我核实一下这些元器件的型号和现货库存情况。

所属插件

电子电气与信息工程面向电气与电子工程研究:电力系统仿真(PSS/E、PSLF、PowerWorld、pandapower、PyPSA、OpenDSS、ANDES)与越限/稳定/短路处置,FPGA 时序收敛与跨时钟域检查,电路与 PCB 设计评审,硬件产品开发流程。

安装该插件会一并获得同领域的 63 个 Skill / MCP。

同插件的其他科研 Skill

常见问题

PCBA物料选型核验能做什么?

Verifies a PCBA BOM before circuit or placement freeze: part numbers, footprints, lifecycle, stock, MOQ, and approved substitutes. Use for sourcing locks or substitutions。

如何安装PCBA物料选型核验?

在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「PCBA物料选型核验」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。

PCBA物料选型核验需要哪些权限?

该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。

PCBA物料选型核验经过官方审核吗?

是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。