科研 Skill

电子产品需求与架构梳理

plan-electronic-product

Turns a vague electronic product idea into a decision-ready engineering brief and architecture. Use before schematic design when requirements are missing or ambiguous.

发布者 Codar安全审核通过v0.1.0更新于 2026-11-18

SKILL.md

Electronic Product Planner

Produce .pcba-workflow/product-brief.yaml and .pcba-workflow/architecture.md. Do not invent requirements merely to fill a template.

Workflow

  1. Read repository instructions and all supplied descriptions, diagrams, existing circuits, firmware behavior, mechanics, and commercial constraints.
  2. Use references/intake-checklist.md to distinguish known facts, design targets, assumptions, and unresolved choices.
  3. Copy assets/product-brief.yaml into the project state directory and complete only supported fields.
  4. Describe system boundaries, actors, external connectors, major functional blocks, data and energy flow, operating modes, startup/shutdown/fault states, and ownership of shared resources in architecture.md.
  5. For every interface, record voltage domains, direction, protocol or bus, nominal rate, edge-rate uncertainty, topology, cable/connector environment, and protection expectations.
  6. Build a provisional power budget by rail and mode. Mark calculated or measured provenance; do not treat typical datasheet current as a guaranteed system maximum.
  7. Record mechanical envelope, user-accessible parts, antenna/enclosure needs, programming and test access, expected quantity, target cost, lifecycle, and compliance context.
  8. Ask the user only for unresolved choices that materially alter architecture or safety. Record the rest as explicit unknowns with an owner and next evidence needed.

Gate

Set status: PASS only when downstream circuit and sourcing specialists can work without guessing core behavior, power source, interfaces, physical limits, or production intent. Use USER_REVIEW for a decision awaiting the owner and BLOCKED for missing evidence that prevents safe progress.

Do not select exact components or approve a circuit in this skill. Hand exact parts to $qualify-pcba-sourcing and electrical implementation to $design-and-review-circuit.

示例提示词

我有一个产品想法但功能还没理清楚,帮我整理成需求简报。

所属插件

电子电气与信息工程面向电气与电子工程研究:电力系统仿真(PSS/E、PSLF、PowerWorld、pandapower、PyPSA、OpenDSS、ANDES)与越限/稳定/短路处置,FPGA 时序收敛与跨时钟域检查,电路与 PCB 设计评审,硬件产品开发流程。

安装该插件会一并获得同领域的 63 个 Skill / MCP。

同插件的其他科研 Skill

常见问题

电子产品需求与架构梳理能做什么?

Turns a vague electronic product idea into a decision-ready engineering brief and architecture. Use before schematic design when requirements are missing or ambiguous。

如何安装电子产品需求与架构梳理?

在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「电子产品需求与架构梳理」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。

电子产品需求与架构梳理需要哪些权限?

该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。

电子产品需求与架构梳理经过官方审核吗?

是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。