科研 Skill
pandapower潮流仿真
pandapower
Runs pandapower power-system studies via PowerMCP: building a network, running AC power flow, and checking voltages/loading. Use for a base-case feeder or grid solve.
SKILL.md
pandapower workflow
Start with the network model and a clean base-case solve. Use contingency analysis only after the steady-state case is credible.
Default tool ladder
load_network(file_path)orcreate_empty_network()get_network_info()to inspect buses, lines, transformers, generators, loads, and switches.run_power_flow(...)to establish the base operating point.run_contingency_analysis(...)only after the base case solves and the monitoring limits are clear.
Example sequence
Using the case39.json network shipped with this skill:
load_network("case39.json") -> 39 buses, 34 lines, 12 transformers, 10 generators
get_network_info() -> confirms slack bus, switch states, and rating fields
run_power_flow() -> converged; report min/max res_bus.vm_pu and worst loading_percent
run_contingency_analysis() -> ranks N-1 outages by the violations each one causes
Read the base-case numbers before running contingencies, then use the escalation table below on whatever the solve actually reports.
Working rules
- Do not run contingencies before checking the base-case voltages and loading.
- Use pandapower for AC feasibility and fast screening, then escalate only when the question requires more.
Escalation triggers
Map what the solve reports to the mitigation skill that handles it, and quote the numbers that tripped it (bus + vm_pu, element + loading %) rather than saying "violations exist".
| Observation | Escalate to |
|---|---|
res_bus.vm_pu < 0.95 or > 1.05 | voltage-violation-mitigation |
res_line / res_trafo loading_percent > 100 | thermal-overload-mitigation |
run_contingency_analysis flags any N-1 violation or islanding | contingency-mitigation |
run_power_flow fails to converge | convergence-failure-mitigation |
| The study is DER (PV, storage) integration on a distribution network | der-hosting-capacity-mitigation |
Local assets in this skill
case39.json— a ready test network.scripts/network_analysis.py— structured base-case review.scripts/contingency_analysis.py— local N-1 screening.
Deliver
- The network loaded and whether the base case converged.
- The key voltage or loading findings.
- Whether contingency or mitigation work is now justified.
示例提示词
帮我用pandapower跑一下这个网络的潮流,看看有没有过载。
所属插件
安装该插件会一并获得同领域的 63 个 Skill / MCP。
同插件的其他科研 Skill
- ANDES电力系统动态仿真Runs ANDES power-system dynamic studies via PowerMCP: power flow, eigenvalue analysis, and time-domain simulation. Use for damping, stability, or oscillation-mode questions.
- 电池选型与电源预算Builds an evidence-tagged power budget and sizes a manufacturable battery with pouch outline, seals, and derating. Use when sizing runtime, mAh, charging, or supply rails.
- FPGA比特流生成与烧录Generates a Xilinx FPGA bitstream and programs it over JTAG, or burns an MCS image into flash for power-on boot. Use when flashing a board or diagnosing boot failures.
- 硬件项目发布包组装Assembles a hardware release package (fab files, BOM/CPL, carts, assembly guide, hashed manifest) and runs a ready-to-build gate. Use before ordering prototypes.
- 时钟域交叉风险审查Audits clock-domain-crossing risk on an FPGA design and applies the smallest safe synchronizer or constraint fix. Use to resolve CDC violations before sign-off.
- 硬件产品认证合规规划Plans certifications a hardware product needs per target market (FCC, CE/RED, UKCA, battery/radio rules), with cost and lead-time estimates. Use before PCB or enclosure tooling.
- Vivado XDC时序约束编写Authors a Vivado XDC timing constraint set from scratch: clocks, I/O delays, and timing exceptions. Use first, before timing closure, on a design with no or incomplete constraints.
- N-1/N-2应急违规处置Playbook for N-1/N-2 contingency violations: ranks contingencies and proposes preventive and corrective actions. Use after a study shows voltage or thermal problems.
- 潮流计算不收敛诊断Playbook for power-flow convergence failures in PSS/E, PSLF, PowerWorld, pandapower, PyPSA, surge, or OpenDSS. Use when a case diverges or fails to solve.
- 硬件成本核算与采购Prices a hardware product at multiple volumes with one-time vs per-unit cost, landed cost per country, and sourcing leads. Use to estimate unit cost before a pitch.
- RTL仿真覆盖率收敛Measures RTL simulation code coverage and iteratively closes it toward a target by adding testbench stimulus. Use for a sign-off-grade coverage report.
- 配电网DER接纳能力治理Playbook for distribution DER hosting-capacity limits: voltage rise, reverse flow, and thermal limits from PV and storage. Use to estimate how much DER a feeder can host.
- 电子电路设计与审查Designs, audits, or corrects an electronic circuit from a brief, schematic, or netlist, checking power domains, reset sequencing, and ratings. Use for circuit review.
- 硬件可制造性红队审查Red-team audit that fix-loops a hardware project to ready-to-build, re-deriving parts, rails, battery physics, and cost. Use for a reality check before committing to a design.
- 电力系统动态稳定处置Playbook for dynamic stability problems: poor damping, angle instability, or sustained oscillations from eigenvalue or time-domain studies. Use after an unstable study result.
- Egret电力市场调度优化Runs Egret market/operations optimization (DC-OPF, AC-OPF, unit commitment) via PowerMCP. Use for cheapest dispatch, unit commitment, or congestion checks.
- 电子元器件选型核查Researches electronic components against primary sources: part numbers, datasheet limits, lifecycle, stock, and price breaks, one dossier per part. Use to verify or source a BOM.
- EMC电磁兼容预测试Plans grounding, shielding, and filtering for EMC/EMI, and runs an emissions pre-scan with a root-cause fix sequence. Use before a lab test or after a failed EMI scan.
- 产品外壳参数化建模Designs a hardware enclosure as parametric CAD with STEP/STL/GLB output, a DFM check, and Blender assembly validation. Use when designing a case or checking fit.
- 电网频率响应问题处置Playbook for frequency problems: low inertia, high RoCoF, weak primary response, or UFLS risk after loss of the largest unit. Use when a study flags frequency issues.
- FPGA RTL到比特流全流程Drives a Xilinx FPGA design end to end through RTL, simulation, synthesis, implementation, and bitstream, gated at every stage. Use to run the complete build flow in one pass.
- 硬件产品全流程总协调Leads a physical electronic product from idea to a doable design, coordinating specs, parts, battery, PCB, enclosure, render, and cost sub-skills. Use starting a hardware product.
- 硬件原理图与BOM审查Reviews hardware projects: checks schematics against datasheets, pin connections, and firmware-to-hardware alignment across KiCad/Altium files. Use for a design alignment check.
- FPGA ILA在线逻辑调试Inserts an Integrated Logic Analyzer, programs the board, arms a trigger, and reads captured waveforms on real FPGA hardware. Use when sim passes but the board fails.
常见问题
pandapower潮流仿真能做什么?
Runs pandapower power-system studies via PowerMCP: building a network, running AC power flow, and checking voltages/loading. Use for a base-case feeder or grid solve。
如何安装pandapower潮流仿真?
在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「pandapower潮流仿真」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。
pandapower潮流仿真需要哪些权限?
该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。
pandapower潮流仿真经过官方审核吗?
是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。