科研 Skill
JLCPCB打样下单操作
operate-jlcpcb-order
Operates and reviews a JLCPCB PCB/PCBA quote or order from a frozen release, covering stencils, component matching, and placement preview, without auto-accepting errors.
SKILL.md
JLCPCB Order Operator
Treat JLCPCB as a second interpretation of the released design, not proof that the design was understood. Use the released artifacts without redesigning them inside the browser.
Keep four approvals separate:
- Design-critical component match or substitution.
- Assembly placement preview.
- Final price and shipping address.
- Payment.
One approval never implies another.
In a recorded workflow, read the manager's recorded-workflow contract when it is available. Store uncropped account/order evidence as private and use only cropped or redacted promotion frames. Record authentic importer mismatches and their source-side corrections; never stage a fake placement error.
Preflight
- Obtain the immutable release manifest, Gerber/drill archive, BOM, CPL, sourcing lock, constraints, quantities, and review evidence. Read references/release-input.md.
- Require manifest
status: PASS, every required release verification PASS, and zero unexplained disconnect/DRC/layout-check counts. Recompute every hash. Stop on a non-PASS manifest, failed/missing check, mixed revision, or hash mismatch; a successful upload cannot waive the release gate. - Stop if reference sets, DNP policy, dimensions, layers, assembly side, or controlled options disagree.
- Record the current JLCPCB project/quote identity and capture the starting page without exposing private account data in public artifacts.
Configure and price the PCB
Enter only released parameters. Do not infer a cheaper thickness, finish, stackup, impedance option, edge treatment, panel method, or mechanical feature. Capture warnings and the itemized quote.
Inspect whether trace/space, via diameter, mechanical drill, via type, layer
count, finish, thickness, stackup, impedance, or another threshold activates a
premium process. Use the live quote rather than a hardcoded universal value.
If a material surcharge is caused by geometry, stop and return measured feedback
to $pcb-layout-review; require a new verified release before re-uploading.
Request an optional physical stencil
When the user wants a physical stencil shipped with or separately from the PCB, read references/stencil-ordering.md. Distinguish it from JLCPCB's internal PCBA tooling. Verify that the requested paste side exists in the frozen Gerber release.
Treat frame type, outer size, thickness, side, and fiducial handling as order settings. Do not design a second stencil outline merely to request a custom outer size: JLCPCB derives apertures from the released paste layer. Store the project-specific request in the release manifest or order record, not as a generic hardcoded default. A paste-data change requires a regenerated and rehashed release.
For a hand-assembly prototype, compare a compact frameless custom size with the site's default large stencil and record size, valid engraving area, price, and shipping impact. When JLCPCB assembles every required board, also compare omitting the shipped physical stencil; internal PCBA tooling is separate.
Match components
Match every line to the exact MPN or an explicitly approved alternate. Verify package, pin count, value, tolerance, ratings, lifecycle, stock, MOQ, assembly class, and total order cost. For unavailable or dominant-cost parts, read references/cost-aware-substitution.md. Any electrical, package, footprint, tie, circuit, or layout change returns to upstream design and release; never implement it as a browser-only substitution.
Calibrate and review placement
Read references/cpl-placement-review.md.
- Treat the first import as diagnostic. On each assembled side, select at least three separated, non-collinear asymmetric/polarized anchors with visible pin 1, including every known package-origin or zero-angle exception.
- Reconcile every expected reference across source, submitted, and imported
X/Y/side/rotation with declared units and tolerance. Use
scripts/reconcile_cpl_import.pyfor the final submitted-to-imported table; any nonzero exit blocks the gate. - Audit physical package registration. Use
scripts/audit_cpl_geometry.pywithpcba-footprint-geometry-v1; duplicated electrical pad numbers, tabs, exposed pads, or supplier aliases require explicit physical-instance maps. - Inspect the actual top and bottom preview at useful zoom. Verify every part, not only suspicious ICs: each lead, terminal, shell anchor, and exposed tab overlaps its pad; body, pin 1, polarity, connector opening, and side are correct; nothing is shifted, mirrored, overlapping, or off-board.
- Save full-board screenshots plus closeups for every critical or exceptional
package and write
.pcba-workflow/assembly-placement-review.json.
Browser X/Y/rotation edits are diagnostics only. If anything fails, record the exact mismatch, correct the source CPL generator or package mapping, regenerate the manifest, discard browser-only edits, re-upload, and repeat the entire machine and visual review until unresolved count is zero.
Final quote and order
Report PCB, assembly, parts, optional physical stencil, setup/extended charges, shipping, tax, lead time, coupons, and total. Confirm the shipping address on screen with the user.
Check only coupons currently eligible for the configured cart. Record the before/after total and eligibility limitation; do not launch an unrelated app, claim a promotion, or change order scope merely to make a coupon apply.
Never approve placement, save a materially changed cart, or pay without the applicable explicit user authorization. Payment authorization must refer to the final displayed total. After an authorized order, preserve confirmation pages, order numbers, final artifacts/hashes, component matches, placement evidence, approved substitutions, price, and payment record.
When the requested terminal point is “until submit,” capture the reviewed page
immediately before the final submit/order action, record order_stop as
USER_REVIEW, and stop. Reaching the button is not authorization to click it;
final submission and payment remain separate irreversible actions.
示例提示词
帮我核对一下这份JLCPCB报价单的BOM匹配和费用,再帮我下单。
所属插件
安装该插件会一并获得同领域的 63 个 Skill / MCP。
同插件的其他科研 Skill
- ANDES电力系统动态仿真Runs ANDES power-system dynamic studies via PowerMCP: power flow, eigenvalue analysis, and time-domain simulation. Use for damping, stability, or oscillation-mode questions.
- 电池选型与电源预算Builds an evidence-tagged power budget and sizes a manufacturable battery with pouch outline, seals, and derating. Use when sizing runtime, mAh, charging, or supply rails.
- FPGA比特流生成与烧录Generates a Xilinx FPGA bitstream and programs it over JTAG, or burns an MCS image into flash for power-on boot. Use when flashing a board or diagnosing boot failures.
- 硬件项目发布包组装Assembles a hardware release package (fab files, BOM/CPL, carts, assembly guide, hashed manifest) and runs a ready-to-build gate. Use before ordering prototypes.
- 时钟域交叉风险审查Audits clock-domain-crossing risk on an FPGA design and applies the smallest safe synchronizer or constraint fix. Use to resolve CDC violations before sign-off.
- 硬件产品认证合规规划Plans certifications a hardware product needs per target market (FCC, CE/RED, UKCA, battery/radio rules), with cost and lead-time estimates. Use before PCB or enclosure tooling.
- Vivado XDC时序约束编写Authors a Vivado XDC timing constraint set from scratch: clocks, I/O delays, and timing exceptions. Use first, before timing closure, on a design with no or incomplete constraints.
- N-1/N-2应急违规处置Playbook for N-1/N-2 contingency violations: ranks contingencies and proposes preventive and corrective actions. Use after a study shows voltage or thermal problems.
- 潮流计算不收敛诊断Playbook for power-flow convergence failures in PSS/E, PSLF, PowerWorld, pandapower, PyPSA, surge, or OpenDSS. Use when a case diverges or fails to solve.
- 硬件成本核算与采购Prices a hardware product at multiple volumes with one-time vs per-unit cost, landed cost per country, and sourcing leads. Use to estimate unit cost before a pitch.
- RTL仿真覆盖率收敛Measures RTL simulation code coverage and iteratively closes it toward a target by adding testbench stimulus. Use for a sign-off-grade coverage report.
- 配电网DER接纳能力治理Playbook for distribution DER hosting-capacity limits: voltage rise, reverse flow, and thermal limits from PV and storage. Use to estimate how much DER a feeder can host.
- 电子电路设计与审查Designs, audits, or corrects an electronic circuit from a brief, schematic, or netlist, checking power domains, reset sequencing, and ratings. Use for circuit review.
- 硬件可制造性红队审查Red-team audit that fix-loops a hardware project to ready-to-build, re-deriving parts, rails, battery physics, and cost. Use for a reality check before committing to a design.
- 电力系统动态稳定处置Playbook for dynamic stability problems: poor damping, angle instability, or sustained oscillations from eigenvalue or time-domain studies. Use after an unstable study result.
- Egret电力市场调度优化Runs Egret market/operations optimization (DC-OPF, AC-OPF, unit commitment) via PowerMCP. Use for cheapest dispatch, unit commitment, or congestion checks.
- 电子元器件选型核查Researches electronic components against primary sources: part numbers, datasheet limits, lifecycle, stock, and price breaks, one dossier per part. Use to verify or source a BOM.
- EMC电磁兼容预测试Plans grounding, shielding, and filtering for EMC/EMI, and runs an emissions pre-scan with a root-cause fix sequence. Use before a lab test or after a failed EMI scan.
- 产品外壳参数化建模Designs a hardware enclosure as parametric CAD with STEP/STL/GLB output, a DFM check, and Blender assembly validation. Use when designing a case or checking fit.
- 电网频率响应问题处置Playbook for frequency problems: low inertia, high RoCoF, weak primary response, or UFLS risk after loss of the largest unit. Use when a study flags frequency issues.
- FPGA RTL到比特流全流程Drives a Xilinx FPGA design end to end through RTL, simulation, synthesis, implementation, and bitstream, gated at every stage. Use to run the complete build flow in one pass.
- 硬件产品全流程总协调Leads a physical electronic product from idea to a doable design, coordinating specs, parts, battery, PCB, enclosure, render, and cost sub-skills. Use starting a hardware product.
- 硬件原理图与BOM审查Reviews hardware projects: checks schematics against datasheets, pin connections, and firmware-to-hardware alignment across KiCad/Altium files. Use for a design alignment check.
- FPGA ILA在线逻辑调试Inserts an Integrated Logic Analyzer, programs the board, arms a trigger, and reads captured waveforms on real FPGA hardware. Use when sim passes but the board fails.
常见问题
JLCPCB打样下单操作能做什么?
Operates and reviews a JLCPCB PCB/PCBA quote or order from a frozen release, covering stencils, component matching, and placement preview, without auto-accepting errors。
如何安装JLCPCB打样下单操作?
在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「JLCPCB打样下单操作」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。
JLCPCB打样下单操作需要哪些权限?
该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。
JLCPCB打样下单操作经过官方审核吗?
是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。