科研 Skill
流体力学分析工作流
fluid-dynamics-workflow
Guides a systematic fluid dynamics analysis from problem setup and domain definition through model selection to validation. Use when planning a CFD or analytical fluid mechanics study end to end.
SKILL.md
Fluid Dynamics Analysis Workflow
A comprehensive, systematic approach to computational fluid dynamics (CFD) and analytical fluid mechanics problems.
Overview
This workflow guides you through complete fluid dynamics analysis, from initial problem formulation through validation. It ensures rigorous treatment of governing physics, appropriate model selection, and proper verification of results.
Complete Analysis Workflow
1. Problem Definition
1.1 Geometry and Domain
-
Physical Domain:
- Define computational domain extent
- Identify key geometric features (boundary layers, separation zones, recirculation)
- Determine symmetry planes to reduce computational cost
- Establish coordinate system (Cartesian, cylindrical, spherical)
- Assess 2D vs 3D requirements
-
Domain Size Considerations:
- Inlet: 5-10 characteristic lengths upstream
- Outlet: 20-30 characteristic lengths downstream
- Lateral boundaries: 5-10 characteristic lengths from object
- Verify no artificial confinement effects
1.2 Flow Regime Characterization
Reynolds Number Analysis:
Re = ρVL/μ = VL/ν
Where:
- ρ: density
- V: characteristic velocity
- L: characteristic length
- μ: dynamic viscosity
- ν: kinematic viscosity
Flow Regime Classification:
- Re < 2300: Laminar flow (pipes)
- 2300 < Re < 4000: Transitional
- Re > 4000: Turbulent (pipes)
- External flows:
- Re < 5×10⁵: Laminar boundary layer
- Re > 5×10⁵: Turbulent boundary layer
Mach Number Analysis:
Ma = V/c
Where:
- V: flow velocity
- c: speed of sound = √(γRT)
Compressibility Classification:
- Ma < 0.3: Incompressible (ρ = constant)
- 0.3 < Ma < 0.8: Subsonic compressible
- 0.8 < Ma < 1.2: Transonic
- 1.2 < Ma < 5.0: Supersonic
- Ma > 5.0: Hypersonic
Froude Number (free surface flows):
Fr = V/√(gL)
- Fr < 1: Subcritical flow
- Fr = 1: Critical flow
- Fr > 1: Supercritical flow
1.3 Additional Dimensionless Numbers
Strouhal Number (unsteady flows):
St = fL/V
- Characterizes oscillating flow mechanisms
- Vortex shedding: St ≈ 0.2 for cylinders
Prandtl Number (heat transfer):
Pr = ν/α = μcp/k
Grashof Number (natural convection):
Gr = gβΔTL³/ν²
2. Governing Equations
2.1 Continuity Equation
Incompressible:
∇·V = 0
Compressible:
∂ρ/∂t + ∇·(ρV) = 0
2.2 Momentum Equations (Navier-Stokes)
Incompressible, Newtonian fluid:
ρ(∂V/∂t + V·∇V) = -∇p + μ∇²V + ρg
Component form (Cartesian):
ρ(∂u/∂t + u∂u/∂x + v∂u/∂y + w∂u/∂z) = -∂p/∂x + μ(∂²u/∂x² + ∂²u/∂y² + ∂²u/∂z²) + ρgₓ
ρ(∂v/∂t + u∂v/∂x + v∂v/∂y + w∂v/∂z) = -∂p/∂y + μ(∂²v/∂x² + ∂²v/∂y² + ∂²v/∂z²) + ρgᵧ
ρ(∂w/∂t + u∂w/∂x + v∂w/∂y + w∂w/∂z) = -∂p/∂z + μ(∂²w/∂x² + ∂²w/∂y² + ∂²w/∂z²) + ρgᵣ
Compressible form:
ρ(∂V/∂t + V·∇V) = -∇p + ∇·τ + ρg
Where stress tensor:
τᵢⱼ = μ(∂uᵢ/∂xⱼ + ∂uⱼ/∂xᵢ) + λ(∇·V)δᵢⱼ
2.3 Energy Equation
For compressible flows:
ρcp(∂T/∂t + V·∇T) = ∇·(k∇T) + Φ + Q
Where:
- Φ: viscous dissipation
- Q: heat source term
Total energy form:
∂(ρE)/∂t + ∇·(ρEV) = -∇·(pV) + ∇·(k∇T) + ∇·(τ·V)
2.4 Turbulence Modeling
Reynolds-Averaged Navier-Stokes (RANS): Decompose variables: u = ū + u'
Reynolds Stress Tensor:
τᵢⱼᴿᴬᴺˢ = -ρu'ᵢu'ⱼ
Closure Models Decision Tree:
START
│
├─ Simple geometry, equilibrium turbulence?
│ └─ YES → k-ε Standard
│
├─ Wall-bounded flow, adverse pressure gradient?
│ └─ YES → k-ω SST (Menter)
│
├─ Separated flow, vortex shedding?
│ └─ YES → k-ω SST or Transition SST
│
├─ Swirling flow, rotation?
│ └─ YES → Reynolds Stress Model (RSM)
│
├─ High accuracy needed, large-scale unsteadiness?
│ └─ YES → Large Eddy Simulation (LES)
│
└─ Research, turbulence structure critical?
└─ YES → Direct Numerical Simulation (DNS)
Model Comparison:
| Model | Advantages | Limitations | Best Use Cases |
|---|---|---|---|
| k-ε Standard | Robust, well-validated | Poor near walls, separated flows | Industrial flows, simple geometries |
| k-ε Realizable | Better for separated flows | Still needs wall functions | Complex geometries, separation |
| k-ω Standard | Good near walls | Sensitive to freestream | Wall-bounded flows |
| k-ω SST | Excellent all-around | Higher computational cost | Aerodynamics, adverse gradients |
| Spalart-Allmaras | One equation, efficient | Calibrated for aerospace | Airfoils, external aerodynamics |
| RSM | Captures anisotropy | 5-7 equations, complex | Swirling, rotating flows |
| LES | Resolves large eddies | Very expensive | Unsteady flows, acoustics |
| DNS | No modeling errors | Extremely expensive | Fundamental research, Re < 10⁴ |
3. Boundary Conditions
3.1 Inlet Boundary Conditions
Velocity Inlet:
- Specify: u, v, w (velocity components)
- For turbulent flows, also specify:
- Turbulent intensity: I = u'/U (typically 1-10%)
- Turbulent length scale: l = 0.07L
- Or directly: k, ε (or ω)
Calculating turbulence quantities:
k = 3/2(UI)²
ε = C_μ^(3/4) k^(3/2) / l
ω = k^(1/2) / (C_μ^(1/4) l)
Where C_μ = 0.09
Pressure Inlet:
- Specify: total pressure p₀
- Flow direction
- Temperature (compressible)
Mass Flow Inlet:
- Specify: ṁ = ρVA
- Flow direction
3.2 Outlet Boundary Conditions
Pressure Outlet:
- Specify static pressure
- Zero gradient for all other quantities: ∂φ/∂n = 0
- Most common and stable
Outflow:
- Fully developed flow assumption
- ∂u/∂x = 0 (all variables)
- Use when outlet is far downstream
Outlet Distance Requirement:
- Minimum 10-15 hydraulic diameters downstream
- For separated flows: 20-30 diameters
3.3 Wall Boundary Conditions
No-Slip Wall (standard):
- V = 0 at wall
- Temperature specified (isothermal) or heat flux
Slip Wall:
- Tangential velocity ≠ 0
- Normal velocity = 0
- V·n = 0, ∂V_tangential/∂n = 0
Wall Function Approach: For turbulent flows, use wall functions when:
- 30 < y⁺ < 300
y⁺ = ρu_τy/μ
u_τ = √(τ_w/ρ) [friction velocity]
Near-Wall Resolution Requirements:
| Approach | y⁺ first cell | Total prism layers | Growth rate |
|---|---|---|---|
| Wall Functions | 30-300 | 3-5 | 1.2-1.3 |
| Low-Re Model | y⁺ < 1 | 10-20 | 1.1-1.2 |
| Enhanced Wall Treatment | y⁺ < 5 | 8-15 | 1.15-1.25 |
Moving Wall:
- Specify wall velocity
- Applications: rotating machinery, conveyors
3.4 Symmetry and Periodic Boundaries
Symmetry:
- Normal velocity = 0
- Zero gradient for other quantities
- ∂φ/∂n = 0
Periodic:
- Translational: φ(x₁) = φ(x₂)
- Rotational: for rotating geometries
- Use to reduce computational domain
3.5 Free Surface (Multiphase)
Volume of Fluid (VOF):
- Track interface with volume fraction
- α = 1 (phase 1), α = 0 (phase 2)
Level Set Method:
- Use signed distance function
- Sharp interface tracking
4. Discretization
4.1 Mesh Requirements
Mesh Types:
| Mesh Type | Advantages | Disadvantages | Best For |
|---|---|---|---|
| Structured (Hexahedral) | Efficient, accurate | Complex geometry difficult | Simple domains, channels |
| Unstructured (Tetrahedral) | Flexible geometry | More cells needed | Complex CAD geometries |
| Hybrid (Prism + Tet) | Best of both | Requires careful setup | Most CFD applications |
| Polyhedral | Fewer cells, stable | Specialized mesher | Industrial CFD |
Mesh Quality Metrics:
- Aspect ratio < 100 (< 20 preferred)
- Skewness < 0.85 (< 0.5 preferred)
- Orthogonality > 0.15 (> 0.7 preferred)
Grid Independence Study:
Refinement ratio: r = 1.5 to 2.0
Test at least 3 mesh levels:
- Coarse: N cells
- Medium: r²N cells
- Fine: r⁴N cells
Check convergence of key outputs:
- Forces (drag, lift)
- Pressures at critical points
- Flow rates
Richardson Extrapolation:
f_exact ≈ f_fine + (f_fine - f_coarse)/(r^p - 1)
Where p is the order of accuracy
4.2 Y⁺ Values for Turbulence
Critical y⁺ ranges:
Viscous sublayer: y⁺ < 5
Buffer layer: 5 < y⁺ < 30
Log-layer: 30 < y⁺ < 300
Outer layer: y⁺ > 300
First cell height calculation:
y = y⁺μ/(ρu_τ)
For flat plate:
u_τ ≈ U∞√(C_f/2)
C_f = 0.058Re_L^(-0.2) [turbulent]
Estimating y for desired y⁺:
Example: Airfoil at Re = 1×10⁶, V = 50 m/s
1. Estimate C_f ≈ 0.0037
2. u_τ = 50√(0.0037/2) = 2.15 m/s
3. For y⁺ = 1: y = 1×1.5e-5/(1.225×2.15) ≈ 5.7e-6 m
First cell: 5.7 μm
4.3 Time Step Selection (Unsteady)
CFL Condition (Courant-Friedrichs-Lewy):
CFL = VΔt/Δx ≤ CFL_max
For explicit schemes: CFL < 1
For implicit schemes: CFL < 10-20 (stability)
CFL < 1-5 (accuracy)
Time step calculation:
Δt = CFL × Δx_min / V_max
Temporal Resolution for Unsteady Features:
- Capture vortex shedding: Δt < T/100 (T = shedding period)
- Transient analysis: Δt < τ/50 (τ = characteristic time)
Dual Time Stepping:
- Physical time step: for accuracy
- Inner iterations: for convergence
5. Solution Strategy
5.1 Solver Selection
Pressure-Velocity Coupling:
| Algorithm | Type | Advantages | Use Cases |
|---|---|---|---|
| SIMPLE | Segregated | Memory efficient | Steady state |
| SIMPLEC | Segregated | Faster convergence | Steady/transient |
| PISO | Segregated | Transient accuracy | Highly unsteady |
| Coupled | Fully-coupled | Robust, fast | Compressible, complex |
Momentum Discretization:
- First-order upwind: Stable but diffusive
- Second-order upwind: Good accuracy
- QUICK: Higher accuracy, bounded
- Central differencing: Low diffusion, needs stability
Pressure Interpolation:
- Standard: Most cases
- PRESTO: Swirling, high-speed rotating flows
- Body-force-weighted: Buoyancy-driven flows
5.2 Convergence Criteria
Residual Monitoring:
Continuity: < 1e-4
Velocity: < 1e-4
Turbulence: < 1e-4
Energy: < 1e-6
Additional Convergence Checks:
- Monitor force coefficients (C_L, C_D)
- Track mass flow balance (in = out)
- Check integrated quantities
- Visualize flow field for reasonableness
Convergence plots should show:
- Smooth decrease in residuals
- Asymptotic approach to steady value
- All residuals dropping together
5.3 Under-Relaxation Factors
Purpose: Stabilize solution, prevent divergence
Typical values (SIMPLE):
Pressure: 0.3
Momentum: 0.7
Turbulence (k): 0.8
Turbulence (ε,ω): 0.8
Energy: 0.9
Adjustment strategy:
- Lower for unstable problems
- Increase gradually as solution develops
- Coupled solver: higher factors possible
6. Post-Processing and Validation
6.1 Flow Visualization
Essential Visualizations:
-
Velocity Contours/Vectors:
- Identify recirculation zones
- Check boundary layer development
- Verify flow direction
-
Pressure Distribution:
- Surface pressure coefficient: C_p = (p - p_∞)/(½ρV²)
- Identify pressure gradients
- Check for unphysical oscillations
-
Streamlines/Pathlines:
- Visualize flow patterns
- Identify separation/reattachment
- Check for reverse flow at outlets
-
Vorticity:
- ω = ∇ × V
- Identify vortex structures
- Turbulence visualization
-
Wall Shear Stress:
- τ_w = μ(∂u/∂y)_wall
- Separation: τ_w = 0
- Friction coefficient: C_f = τ_w/(½ρV²)
-
Turbulence Quantities:
- Turbulent kinetic energy (k)
- Turbulent viscosity ratio (μ_t/μ)
- y⁺ distribution
6.2 Force Calculations
Pressure and Viscous Forces:
F_pressure = ∫∫ p·n dA
F_viscous = ∫∫ τ·n dA
F_total = F_pressure + F_viscous
Non-dimensional Coefficients:
C_D = D/(½ρV²A) [Drag coefficient]
C_L = L/(½ρV²A) [Lift coefficient]
C_M = M/(½ρV²AL) [Moment coefficient]
Pressure Coefficient:
C_p = (p - p_∞)/(½ρV²)
Friction Coefficient:
C_f = τ_w/(½ρV²)
6.3 Validation and Verification
Verification (Solving equations right):
- Grid Convergence Index (GCI):
GCI = F_s |ε|/(r^p - 1)
Where:
- F_s = safety factor (1.25 for 3+ grids)
- ε = (f_fine - f_coarse)/f_fine
- r = refinement ratio
- p = order of accuracy
- Temporal Convergence:
- Repeat with Δt/2
- Verify time-step independence
- Iterative Convergence:
- Ensure residuals decrease adequately
- Monitor solution variables
Validation (Solving right equations):
-
Analytical Solutions:
- Poiseuille flow (channel)
- Couette flow
- Blasius boundary layer
- Potential flow over cylinder
-
Experimental Data:
- Wind tunnel measurements
- PIV (Particle Image Velocimetry)
- Hot-wire anemometry
-
Benchmark Cases:
- Lid-driven cavity
- Flow over cylinder
- Backward-facing step
- Ahmed body
Validation Metrics:
Mean Absolute Error:
MAE = (1/N)Σ|φ_CFD - φ_exp|
Root Mean Square Error:
RMSE = √[(1/N)Σ(φ_CFD - φ_exp)²]
Coefficient of Determination:
R² = 1 - Σ(φ_exp - φ_CFD)²/Σ(φ_exp - φ̄_exp)²
Decision Trees
Flow Regime Decision Tree
START: Define Problem
│
├─ Calculate Re = ρVL/μ
│
├─ Re < 1 (Stokes flow)
│ └─ Use: Creeping flow equations
│
├─ 1 < Re < 100 (Low Re)
│ └─ Use: Laminar NS, full domain
│
├─ Re < 2300 (Internal)
│ └─ Use: Laminar NS
│
├─ 2300 < Re < 4000 (Transitional)
│ └─ Use: Transition models (γ-Re_θ)
│
├─ Re > 4000 (Turbulent)
│ ├─ Calculate Ma = V/c
│ │
│ ├─ Ma < 0.3
│ │ └─ Incompressible RANS
│ │
│ ├─ 0.3 < Ma < 1
│ │ └─ Compressible RANS
│ │
│ └─ Ma > 1
│ └─ Compressible + shock capturing
│
└─ Unsteady features?
├─ YES → Calculate St = fL/V
│ ├─ St > 0.1 → Use URANS or LES
│ └─ St < 0.1 → RANS may suffice
└─ NO → RANS sufficient
Turbulence Model Selection Tree
START: Turbulent Flow Confirmed
│
├─ Computational Budget?
│
├─ VERY HIGH (Research)
│ └─ Use DNS (if Re allows)
│
├─ HIGH
│ ├─ Massively separated?
│ │ └─ YES → LES (WALE, Smagorinsky)
│ │
│ └─ NO → URANS with fine mesh
│
└─ MODERATE (Engineering)
│
├─ Flow Type?
│
├─ EXTERNAL (Aero/Hydro)
│ ├─ Pressure gradient?
│ │ ├─ ADVERSE → k-ω SST
│ │ └─ FAVORABLE → Spalart-Allmaras
│ │
│ └─ Separation likely? → k-ω SST
│
├─ INTERNAL (Pipes, Channels)
│ ├─ Simple geometry → k-ε Standard
│ ├─ Complex, bends → k-ε Realizable
│ └─ Heat transfer → k-ω SST
│
├─ ROTATING/SWIRLING
│ └─ RSM (Reynolds Stress Model)
│
└─ TRANSITIONAL
└─ γ-Re_θ Transition SST
Mesh Strategy Decision Tree
START: Domain Defined
│
├─ Geometry Complexity?
│
├─ SIMPLE (Rectangular, cylindrical)
│ └─ Structured hexahedral
│ └─ O-grid for cylinders
│
├─ MODERATE
│ └─ Hybrid mesh
│ ├─ Prism layers at walls
│ └─ Hex/tet in core
│
└─ COMPLEX (CAD geometry)
└─ Unstructured
├─ Prism layers at walls (always)
└─ Tet or poly in core
│
├─ Boundary Layer Resolution?
│
├─ WALL FUNCTIONS (y⁺ = 30-300)
│ ├─ First cell: y⁺ ≈ 50
│ ├─ Prism layers: 3-5
│ └─ Growth rate: 1.2-1.3
│
└─ NEAR-WALL RESOLUTION (y⁺ < 1)
├─ First cell: y⁺ < 1
├─ Prism layers: 10-20
├─ Growth rate: 1.1-1.2
└─ At least 10 cells in boundary layer
│
└─ Refinement Zones?
├─ Wake regions: 2-3× density
├─ Shear layers: graded refinement
├─ Recirculation: fine mesh
└─ Free stream: coarse OK
Common Pitfalls and Solutions
Problem: Solution Not Converging
Diagnosis:
- Residuals oscillating
- Force coefficients fluctuating
- Solution diverging
Solutions:
- Reduce under-relaxation factors
- Improve mesh quality (aspect ratio, skewness)
- Use first-order schemes initially
- Check boundary condition consistency
- Reduce time step (unsteady)
- Switch to coupled solver
Problem: Unphysical Results
Diagnosis:
- Negative pressures (absolute)
- Reverse flow at inlet
- Mass imbalance > 1%
- Unrealistic separation
Solutions:
- Verify boundary conditions
- Check material properties
- Ensure proper reference values
- Verify coordinate system
- Check for mesh errors
- Review turbulence model selection
Problem: High y⁺ Values
Diagnosis:
- y⁺ > 5 when using low-Re model
- y⁺ < 30 when using wall functions
Solutions:
- Recalculate first cell height
- Adjust inflation parameters
- Use enhanced wall treatment
- Switch between wall function/resolved approaches
Best Practices Summary
-
Always start with problem physics:
- Calculate dimensionless numbers
- Identify dominant phenomena
- Select appropriate simplifications
-
Build mesh systematically:
- Start coarse, refine iteratively
- Prioritize boundary layer resolution
- Perform grid independence study
-
Start simple, add complexity:
- Begin with steady RANS
- Use first-order upwind for stability
- Progress to higher-order schemes
- Add unsteadiness if needed
-
Monitor everything:
- Residuals
- Force coefficients
- Mass flow balance
- y⁺ distribution
-
Validate rigorously:
- Compare with experiments/theory
- Check physical realizability
- Perform uncertainty quantification
- Document assumptions and limitations
-
Report uncertainty:
- Grid convergence index
- Comparison with validation data
- Sensitivity to boundary conditions
- Model form uncertainty
References and Resources
Foundational Texts:
- "Computational Fluid Dynamics" by Anderson
- "An Introduction to Computational Fluid Dynamics" by Versteeg & Malalasekera
- "Turbulent Flows" by Pope
Validation Databases:
- NASA Turbulence Modeling Resource
- ERCOFTAC Database
- NPARC Alliance Validation Archive
Best Practice Guidelines:
- AIAA Guide for Verification and Validation in CFD
- ASME V&V Standards
- ERCOFTAC Best Practice Guidelines
示例提示词
帮我按标准流程梳理这个管道流动问题,从建模到结果验证。
所属插件
安装该插件会一并获得同领域的 36 个 Skill / MCP。
同插件的其他科研 Skill
- ANSYS Fluent CFD仿真自动化Automates ANSYS Fluent CFD setup, meshing, and batch runs via Python scripting, journal files, and the PyAnsys ecosystem. Use when a user wants to script or automate an ANSYS Fluent simulation.
- Cantera燃烧仿真Runs Cantera combustion simulations: flame temperature, ignition delay, laminar flame speed, PSR. Use for mechanism-based combustion analysis tasks.
- 离心泵气蚀风险评估Calculates NPSHa and NPSHr and assesses cavitation risk for centrifugal pumps, with prevention and detection guidance. Use when sizing suction piping or diagnosing pump cavitation.
- 气蚀评估物性数据库Looks up vapor pressure, NPSHr data, and correlations for cavitation risk assessment in pumps. Use when cavitation-analysis needs reference property or NPSHr data.
- 离心泵设计计算Designs centrifugal pumps from first principles using Euler equations, velocity triangles, and specific speed. Use for impeller sizing or new centrifugal pump design.
- COMSOL多物理场耦合仿真Sets up coupled fluid-structure interaction simulations in COMSOL Multiphysics, focused on pump vibration analysis. Use when a user wants to script or automate a COMSOL FSI model.
- CoolProp流体物性查询Queries thermodynamic and transport properties for 100+ pure and pseudo-pure fluids via the CoolProp library. Use when a calculation needs fluid density, viscosity, or enthalpy data.
- 工程计算环境初始化Sets up a Python session with engineering constants, Pint units, and plotting defaults. Use at the start of a calculation session.
- 流体计算数值错误校验Handles common numerical errors in fluid calculations, such as division by zero and out-of-range physical values, with validation checks. Use when fluid code fails or returns unphysical results.
- 经验公式流体物性速算Computes quick fluid property estimates (density, viscosity, vapor pressure) from empirical correlations without needing a database. Use for fast order-of-magnitude property checks.
- 管道流动与泵选型计算Computes pipe flow, pump sizing, friction factor, and compressible flow results with the fluids Python package. Use for quick, code-based fluid mechanics calculations.
- 工程工具与数据库清点Enumerates installed Python packages, databases, and simulation tools available in the current environment. Use at the start of a session to avoid recommending unavailable tools.
- 管路元件损失系数查询Looks up loss coefficients (K-values) and equivalent lengths for pipes, valves, and fittings in pump and piping systems. Use when computing system head loss.
- 流体与材料物性查询Looks up temperature-dependent fluid viscosities, densities, and other material properties for pump and heat-transfer calculations. Use when a calculation needs property data at a given temperature.
- 泵性能曲线绘制Creates professional engineering plots such as pump performance curves, CFD velocity contours, and publication-quality figures with matplotlib. Use when a result needs a plotted figure.
- NASA大气与航空流体数据Accesses atmospheric property profiles and standard-atmosphere models from NASA Earthdata for high-altitude and aerospace fluid analysis. Use when a task needs altitude-dependent atmospheric data.
- 管网图论建模Models hydraulic piping networks and multi-pump systems as graphs using NetworkX flow algorithms. Use for analyzing flow distribution across a branched or looped piping network.
- REFPROP高精度物性查询Queries high-accuracy thermodynamic and transport properties from the commercial NIST REFPROP database. Use when a calculation needs reference-quality fluid property data and REFPROP is licensed.
- 数值数组计算Performs numerical array operations with NumPy: velocity field processing, pump curve interpolation, linear systems, and matrix methods. Use for general numerical computation in engineering code.
- OpenFOAM仿真与后处理Runs and post-processes OpenFOAM CFD simulations with PyFoam, pyvista, and vtk for mesh setup, solver control, and visualization. Use for scripted OpenFOAM workflows outside ParaView.
- 泵性能曲线与相似定律Generates and interprets pump H-Q/efficiency/power/NPSH curves, applies affinity laws, and predicts off-design performance. Use for pump curve analysis.
- 工程单位换算与量纲分析Handles engineering units with automatic conversion and dimensional-consistency checking using the Pint library. Use whenever a calculation mixes units or needs unit safety.
- 容积式泵设计分析Designs and analyzes gear, piston, and screw positive-displacement pumps, including volumetric efficiency and slip. Use when the pump is positive-displacement rather than centrifugal.
- 泵效率优化Maximizes pump efficiency through hydraulic design changes and operational strategies such as trimming, VFD control, and system matching. Use when a pump is running inefficiently.
常见问题
流体力学分析工作流能做什么?
Guides a systematic fluid dynamics analysis from problem setup and domain definition through model selection to validation. Use when planning a CFD or analytical fluid mechanics study end to end。
如何安装流体力学分析工作流?
在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「流体力学分析工作流」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。
流体力学分析工作流需要哪些权限?
该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。
流体力学分析工作流经过官方审核吗?
是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。