科研 Skill
经颅超声刺激剂量规划
neuro-tus-dose-planning
Plans and reports transcranial focused ultrasound dose with acoustic and thermal simulation through the skull. Use when designing a TUS protocol or checking safety indices.
SKILL.md
TUS dose planning
Ultrasound is attenuated, refracted and focused differently by each skull, so free-water transducer specifications do not describe the dose in the brain. Simulate per participant, check mechanical and thermal indices, and report every parameter.
0. Load the tool reference
Read references/simulation-and-safety.md: k-Wave / k-wave-python,
k-Plan, BabelBrain and Kranion, and the ITRUSST levels. Compute MI,
Isppa, Ispta and thermal dose with scripts/tus_indices.py.
1. Parameters to define
Transducer (model, elements, focal distance, aperture), fundamental frequency, pulse duration, pulse repetition frequency (PRF), duty cycle, pulse train duration, sonication duration and repetition, total session time, and target with coordinates.
2. Simulate through the skull
- Build skull properties from CT (best) or pseudo-CT from MRI (UTE/ZTE or T1-based methods), registered to the participant.
- Run acoustic simulation (k-Wave, k-Plan or BabelBrain) for the transducer placement, then a thermal simulation for the full pulsing sequence.
- Report in brain and skull: peak pressure, spatial-peak pulse-average intensity (Isppa), spatial-peak temporal-average intensity (Ispta), mechanical index (MI), focal position shift and size vs intended, and maximum temperature rise in brain, skull and skin.
3. Check against safety guidance
Compare with the ITRUSST consensus (Aubry et al. 2025, Brain Stimulation 18(6):1896-1905): non-significant risk if MI (or MItc) is at most 1.9, and for heating if any one of these holds: peak rise at most 2 °C (or peak at most 39 °C from 37 °C); thermal dose at most 2 CEM43 in brain, 16 in bone, 21 in skin; or thermal index within the tabulated values for the exposure time. These are levels, not limits; your approved protocol governs. The FDA diagnostic reference (Ispta.3 up to 720 mW/cm^2, MI up to 1.9) is often quoted alongside but was set for imaging. If simulation uncertainty is large, plan with margin.
4. Control for auditory and somatosensory confounds
Pulsed ultrasound at audible PRFs can produce an audible tone through
bone conduction, which by itself evokes brain responses. Use auditory
masking, ramped pulse envelopes, and an active sham with matched sound,
and ask participants afterwards what they perceived (see
neuro-sham-and-blinding-design).
5. Report
All parameters from step 1, free-field calibration (hydrophone), skull model source, simulated in-brain values from step 2 with software and version, safety comparison, confound controls.
示例提示词
帮我用k-Wave仿真这个TUS靶点经过颅骨的声学和温升剂量。
所属插件
安装该插件会一并获得同领域的 45 个 Skill / MCP。
同插件的其他科研 Skill
- Allen脑区本体查询Looks up Allen Institute brain region names, acronyms and atlas hierarchy, and picks a BrainGlobe reference atlas. Use when matching region labels across datasets or papers.
- 动物行为姿态追踪Tracks animal pose and behavior from video with DeepLabCut or SLEAP, and extracts kinematic and behavioral event features. Use for markerless tracking or scoring behavior.
- BIDS神经影像数据管理Converts raw EEG or fMRI data to BIDS, validates with bids-validator, and queries or manages datasets with pybids and datalad. Use when organizing or sharing neuroimaging data.
- Brian2脉冲神经网络仿真Simulates LIF, AdEx and Hodgkin-Huxley spiking neuron networks in Brian2, including STDP plasticity and recurrent dynamics. Use when building a spiking network model.
- 钙成像数据分析Processes two-photon or widefield calcium imaging with Suite2p or CaImAn, from motion correction through ROI extraction to dF/F and spike deconvolution. Use for calcium imaging movies.
- 功能连接组图论分析Computes functional connectivity matrices and graph-theory metrics such as modularity and path length from ROI time series. Use when analyzing brain network topology.
- MNE脑电脑磁分析Runs an MNE-Python EEG or MEG pipeline covering preprocessing, ICA cleanup, ERP and time-frequency analysis, and source localization. Use to analyze raw EEG/MEG recordings end to end.
- 神经解码无泄漏评估Guides leakage-free cross-validation of neural decoders, including subject grouping, nested CV, chance levels and confound checks. Use when training or reporting a BCI classifier.
- 电极通道映射校验Checks that EEG, ECoG or probe channel labels and positions match physiology using correlation-distance consistency. Use when montage labels may be swapped or bridged.
- 聚类置换统计检验Explains how to set up and correctly interpret cluster-based permutation tests and TFCE for ERP or time-frequency data. Use to avoid onset or localization overclaims.
- 神经连接性分析核查Guides choice of leakage-robust connectivity measures such as wPLI, imaginary coherency and AEC, with confound controls. Use when reviewing or planning a connectivity analysis.
- 神经数据集陷阱审查Checklist for auditing neural datasets before training: rate and channel consistency, duplicate subjects, label mapping. Use before modeling on a public or lab dataset.
- 神经数据档案库导航Lists neural data archives such as OpenNeuro, DANDI, PhysioNet and MOABB by paradigm, with access tiers and download guidance. Use when finding a dataset for a research question.
- DBS植入物传感数据分析Loads, time-aligns and analyzes sensing data from DBS and bidirectional implants such as Percept and Summit RC+S. Use with implant LFP exports, packet loss or aDBS biomarkers.
- 神经解码器嵌入式移植Ports a neural signal-processing or BCI decoder from Python or MATLAB to fixed-point embedded C on a microcontroller. Use when moving a decoder onto implant or headstage firmware.
- 神经设备法规合规映射Maps a neurotech device to the regulatory standards and testing it needs and builds a requirements-to-risk traceability matrix. Use when planning verification or a design review.
- EEG预处理流程审查Designs or audits an EEG or MEG preprocessing pipeline in MNE-Python, EEGLAB, FieldTrip or Brainstorm. Use when choosing or reviewing filter, ICA or epoching settings.
- 神经电极电化学表征Characterizes neural electrodes electrochemically via impedance spectroscopy, cyclic voltammetry and charge-injection limits. Use when comparing electrode coatings or charge capacity.
- 神经记录文件格式转换Opens, inspects and converts neural recording files from EEG, MEG, intracranial and fNIRS acquisition systems. Use when a reader errors or units, rates or events look wrong.
- 神经信号基础模型评估Fairly evaluates pretrained EEG or iEEG foundation models against classical baselines with matched data and splits. Use when fine-tuning or linear-probing a pretrained model.
- 神经记录前端电路设计Designs or reviews analog front ends for neural recording headstages, covering noise budget, CMRR and ADC resolution. Use when choosing an amplifier or debugging a noisy front end.
- 脑机解码器长期稳定性Evaluates intracortical BCI decoders across days using zero-shot and few-shot regimes to quantify drift and recalibration cost. Use to assess decoder stability over sessions.
- 植入设备功耗热预算Budgets power, data rate and tissue heating for implanted or wireless neural interfaces against thermal screening limits. Use when sizing a high-channel-count implant design.
- NeuroKit2生理信号处理Processes physiological biosignals such as ECG, EEG, EDA, RSP, EMG and EOG with NeuroKit2, including HRV and complexity metrics. Use for psychophysiology or multi-modal signal analysis.
常见问题
经颅超声刺激剂量规划能做什么?
Plans and reports transcranial focused ultrasound dose with acoustic and thermal simulation through the skull. Use when designing a TUS protocol or checking safety indices。
如何安装经颅超声刺激剂量规划?
在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「经颅超声刺激剂量规划」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。
经颅超声刺激剂量规划需要哪些权限?
该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。
经颅超声刺激剂量规划经过官方审核吗?
是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。