科研 Skill
神经解码器嵌入式移植
neuro-decoder-to-firmware
Ports a neural signal-processing or BCI decoder from Python or MATLAB to fixed-point embedded C on a microcontroller. Use when moving a decoder onto implant or headstage firmware.
SKILL.md
Decoder to firmware
The firmware must give the same decisions as the reference on every input the hardware can produce, including full-scale and near-silent signals. Work from a bit-accurate plan, then test against the reference with vectors that cover the extremes.
1. Inventory the reference
List every stage with its numeric range: input type and range (int16 ADC counts, offsets), filters (order, type, band, fs), features (variance, log, power), classifier (weights, bias, comparison). Note where the reference relies on floating point (log, division, mean removal).
2. Filters
- Always implement IIR filters as cascaded second-order sections, never as one high-order direct form (coefficient sensitivity grows with order).
- Generate quantized coefficients and headroom with the bundled script:
python scripts/quantize_sos.py --design butter --order 4 --band 8 30 --btype bandpass --fs 250 \
--coef-bits 30 --input-bits 16 --c-header sos_coefs.h
It reports, per section, the coefficient format, pole radius before and after quantization (stability margin), the worst-case gain from the input to each section output (L1 norm of the impulse response), the bits of headroom needed, and the accumulator width required. It writes a C header.
- Poles near z = 1 (high-pass below about 1 Hz at kHz rates) need more coefficient and state precision; use 32-bit coefficients with 64-bit accumulation, or a state-variable / error-feedback structure.
- Saturate on output; never let values wrap.
3. Features and classifier without floats
- Mean removal: work with sums (
n*x - sum) to avoid division. - Variance: sum of squares in 64 bits (int16 squared times hundreds of samples overflows 32 bits).
- Log: avoid it where possible. For LDA on log-variance,
w*(log v0 - log v1) + b > 0becomesv0^w * e^b > v1^w; for w = 1 comparev0 * K > v1with K = round(e^b * 2^q). Otherwise use a fixed-point log2 (leading-zero count plus a lookup or polynomial). - Keep weights in a Q format chosen from their range.
4. Verify
- Write a bit-exact Python model of the C arithmetic, or compile the C on the host and call it from Python.
- Test vectors: typical trials, full-scale (near +/-32767), near-silent, large DC offsets, constant input, single spikes, and trials close to the decision boundary.
- Require identical decisions (or report the mismatch rate and where it occurs) and filter output error within one LSB.
- Cross-compile for the target and estimate cycles per sample against the sample period.
Output
C files with the requested API, the coefficient header, the headroom report, the test-vector results, and the cycle estimate.
示例提示词
帮我把这个Python的CSP解码器移植成微控制器上的定点C代码。
所属插件
安装该插件会一并获得同领域的 45 个 Skill / MCP。
同插件的其他科研 Skill
- Allen脑区本体查询Looks up Allen Institute brain region names, acronyms and atlas hierarchy, and picks a BrainGlobe reference atlas. Use when matching region labels across datasets or papers.
- 动物行为姿态追踪Tracks animal pose and behavior from video with DeepLabCut or SLEAP, and extracts kinematic and behavioral event features. Use for markerless tracking or scoring behavior.
- BIDS神经影像数据管理Converts raw EEG or fMRI data to BIDS, validates with bids-validator, and queries or manages datasets with pybids and datalad. Use when organizing or sharing neuroimaging data.
- Brian2脉冲神经网络仿真Simulates LIF, AdEx and Hodgkin-Huxley spiking neuron networks in Brian2, including STDP plasticity and recurrent dynamics. Use when building a spiking network model.
- 钙成像数据分析Processes two-photon or widefield calcium imaging with Suite2p or CaImAn, from motion correction through ROI extraction to dF/F and spike deconvolution. Use for calcium imaging movies.
- 功能连接组图论分析Computes functional connectivity matrices and graph-theory metrics such as modularity and path length from ROI time series. Use when analyzing brain network topology.
- MNE脑电脑磁分析Runs an MNE-Python EEG or MEG pipeline covering preprocessing, ICA cleanup, ERP and time-frequency analysis, and source localization. Use to analyze raw EEG/MEG recordings end to end.
- 神经解码无泄漏评估Guides leakage-free cross-validation of neural decoders, including subject grouping, nested CV, chance levels and confound checks. Use when training or reporting a BCI classifier.
- 电极通道映射校验Checks that EEG, ECoG or probe channel labels and positions match physiology using correlation-distance consistency. Use when montage labels may be swapped or bridged.
- 聚类置换统计检验Explains how to set up and correctly interpret cluster-based permutation tests and TFCE for ERP or time-frequency data. Use to avoid onset or localization overclaims.
- 神经连接性分析核查Guides choice of leakage-robust connectivity measures such as wPLI, imaginary coherency and AEC, with confound controls. Use when reviewing or planning a connectivity analysis.
- 神经数据集陷阱审查Checklist for auditing neural datasets before training: rate and channel consistency, duplicate subjects, label mapping. Use before modeling on a public or lab dataset.
- 神经数据档案库导航Lists neural data archives such as OpenNeuro, DANDI, PhysioNet and MOABB by paradigm, with access tiers and download guidance. Use when finding a dataset for a research question.
- DBS植入物传感数据分析Loads, time-aligns and analyzes sensing data from DBS and bidirectional implants such as Percept and Summit RC+S. Use with implant LFP exports, packet loss or aDBS biomarkers.
- 神经设备法规合规映射Maps a neurotech device to the regulatory standards and testing it needs and builds a requirements-to-risk traceability matrix. Use when planning verification or a design review.
- EEG预处理流程审查Designs or audits an EEG or MEG preprocessing pipeline in MNE-Python, EEGLAB, FieldTrip or Brainstorm. Use when choosing or reviewing filter, ICA or epoching settings.
- 神经电极电化学表征Characterizes neural electrodes electrochemically via impedance spectroscopy, cyclic voltammetry and charge-injection limits. Use when comparing electrode coatings or charge capacity.
- 神经记录文件格式转换Opens, inspects and converts neural recording files from EEG, MEG, intracranial and fNIRS acquisition systems. Use when a reader errors or units, rates or events look wrong.
- 神经信号基础模型评估Fairly evaluates pretrained EEG or iEEG foundation models against classical baselines with matched data and splits. Use when fine-tuning or linear-probing a pretrained model.
- 神经记录前端电路设计Designs or reviews analog front ends for neural recording headstages, covering noise budget, CMRR and ADC resolution. Use when choosing an amplifier or debugging a noisy front end.
- 脑机解码器长期稳定性Evaluates intracortical BCI decoders across days using zero-shot and few-shot regimes to quantify drift and recalibration cost. Use to assess decoder stability over sessions.
- 植入设备功耗热预算Budgets power, data rate and tissue heating for implanted or wireless neural interfaces against thermal screening limits. Use when sizing a high-channel-count implant design.
- NeuroKit2生理信号处理Processes physiological biosignals such as ECG, EEG, EDA, RSP, EMG and EOG with NeuroKit2, including HRV and complexity metrics. Use for psychophysiology or multi-modal signal analysis.
- NeuroMorpho神经元形态检索Finds and compares digital neuron reconstructions on NeuroMorpho.Org by region, cell type or species and reads their morphometry. Use when real neuron morphologies are needed.
常见问题
神经解码器嵌入式移植能做什么?
Ports a neural signal-processing or BCI decoder from Python or MATLAB to fixed-point embedded C on a microcontroller. Use when moving a decoder onto implant or headstage firmware。
如何安装神经解码器嵌入式移植?
在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「神经解码器嵌入式移植」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。
神经解码器嵌入式移植需要哪些权限?
该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。
神经解码器嵌入式移植经过官方审核吗?
是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。