科研 Skill
外周神经刺激建模
neuro-nerve-stim-modeling
Models peripheral nerve stimulation with finite-element fields coupled to axon models to predict fiber recruitment and selectivity. Use when designing a nerve cuff or electrode layout.
SKILL.md
Nerve stimulation modeling
Which fibers fire depends on geometry (nerve, fascicles, electrode), tissue conductivities, fiber diameter and type, and the waveform. Model the field and the axons together, then check the model against measured recruitment.
0. Load the tool reference
Read references/neuron-and-ascent.md: how to apply a field to an axon in
NEURON (run and checked), the MRG model, the ASCENT pipeline, and the
model traps (the built-in squid hh model at 6.3 °C gives unrealistic
mammalian thresholds).
1. Geometry and field
- Nerve cross-section from histology (fascicle outlines, perineurium, epineurium) rather than idealised circles when available.
- Electrode: cuff inner diameter, contact size and spacing, insulation, fluid gap.
- Solve the extracellular potential with finite elements (COMSOL, Sim4Life, or the open ASCENT pipeline; Musselman et al. 2021). Report conductivities (anisotropic for endoneurium) and mesh convergence.
2. Axon models
- Myelinated fibers: MRG model (McIntyre, Richardson & Grill 2002) across the fiber diameter distribution of the target nerve.
- Unmyelinated C fibers: a dedicated model (for example Sundt et al. 2015).
- Place fibers within fascicles from the histology; run in NEURON with the extracellular potentials applied.
3. Outputs
- Threshold per fiber, then recruitment curves (fraction activated vs amplitude) per fiber type and fascicle.
- Selectivity: recruitment of target vs off-target fascicles at the same amplitude.
- Strength-duration (rheobase, chronaxie) to choose pulse width.
- Waveform effects: cathodic vs anodic first, asymmetric charge-balanced pulses, kilohertz block if relevant.
4. Validate
Compare predicted thresholds and recruitment order with measured
compound action potentials or EMG; adjust only physically justified
parameters and report which. Check charge and density of chosen settings
with neuro-stim-safety-check.
Report
Geometry source, FEM settings and conductivities, fiber models and distributions, recruitment and selectivity results, validation against data, and safety check of the proposed parameters.
Limitations
This skill produces research-engineering modeling estimates, not a
clinical or regulatory determination. Model predictions depend heavily on
tissue conductivity assumptions, mesh quality and the fiber-diameter
distribution used; validate against measured recruitment before relying
on them. Any resulting stimulation parameters for human or animal use
still require review by the responsible clinician, ethics/IACUC committee,
and (for devices) the applicable regulatory pathway (see
neuro-device-regulatory) before use.
示例提示词
帮我用有限元模型预测这个迷走神经袖带电极的纤维募集阈值。
所属插件
安装该插件会一并获得同领域的 45 个 Skill / MCP。
同插件的其他科研 Skill
- Allen脑区本体查询Looks up Allen Institute brain region names, acronyms and atlas hierarchy, and picks a BrainGlobe reference atlas. Use when matching region labels across datasets or papers.
- 动物行为姿态追踪Tracks animal pose and behavior from video with DeepLabCut or SLEAP, and extracts kinematic and behavioral event features. Use for markerless tracking or scoring behavior.
- BIDS神经影像数据管理Converts raw EEG or fMRI data to BIDS, validates with bids-validator, and queries or manages datasets with pybids and datalad. Use when organizing or sharing neuroimaging data.
- Brian2脉冲神经网络仿真Simulates LIF, AdEx and Hodgkin-Huxley spiking neuron networks in Brian2, including STDP plasticity and recurrent dynamics. Use when building a spiking network model.
- 钙成像数据分析Processes two-photon or widefield calcium imaging with Suite2p or CaImAn, from motion correction through ROI extraction to dF/F and spike deconvolution. Use for calcium imaging movies.
- 功能连接组图论分析Computes functional connectivity matrices and graph-theory metrics such as modularity and path length from ROI time series. Use when analyzing brain network topology.
- MNE脑电脑磁分析Runs an MNE-Python EEG or MEG pipeline covering preprocessing, ICA cleanup, ERP and time-frequency analysis, and source localization. Use to analyze raw EEG/MEG recordings end to end.
- 神经解码无泄漏评估Guides leakage-free cross-validation of neural decoders, including subject grouping, nested CV, chance levels and confound checks. Use when training or reporting a BCI classifier.
- 电极通道映射校验Checks that EEG, ECoG or probe channel labels and positions match physiology using correlation-distance consistency. Use when montage labels may be swapped or bridged.
- 聚类置换统计检验Explains how to set up and correctly interpret cluster-based permutation tests and TFCE for ERP or time-frequency data. Use to avoid onset or localization overclaims.
- 神经连接性分析核查Guides choice of leakage-robust connectivity measures such as wPLI, imaginary coherency and AEC, with confound controls. Use when reviewing or planning a connectivity analysis.
- 神经数据集陷阱审查Checklist for auditing neural datasets before training: rate and channel consistency, duplicate subjects, label mapping. Use before modeling on a public or lab dataset.
- 神经数据档案库导航Lists neural data archives such as OpenNeuro, DANDI, PhysioNet and MOABB by paradigm, with access tiers and download guidance. Use when finding a dataset for a research question.
- DBS植入物传感数据分析Loads, time-aligns and analyzes sensing data from DBS and bidirectional implants such as Percept and Summit RC+S. Use with implant LFP exports, packet loss or aDBS biomarkers.
- 神经解码器嵌入式移植Ports a neural signal-processing or BCI decoder from Python or MATLAB to fixed-point embedded C on a microcontroller. Use when moving a decoder onto implant or headstage firmware.
- 神经设备法规合规映射Maps a neurotech device to the regulatory standards and testing it needs and builds a requirements-to-risk traceability matrix. Use when planning verification or a design review.
- EEG预处理流程审查Designs or audits an EEG or MEG preprocessing pipeline in MNE-Python, EEGLAB, FieldTrip or Brainstorm. Use when choosing or reviewing filter, ICA or epoching settings.
- 神经电极电化学表征Characterizes neural electrodes electrochemically via impedance spectroscopy, cyclic voltammetry and charge-injection limits. Use when comparing electrode coatings or charge capacity.
- 神经记录文件格式转换Opens, inspects and converts neural recording files from EEG, MEG, intracranial and fNIRS acquisition systems. Use when a reader errors or units, rates or events look wrong.
- 神经信号基础模型评估Fairly evaluates pretrained EEG or iEEG foundation models against classical baselines with matched data and splits. Use when fine-tuning or linear-probing a pretrained model.
- 神经记录前端电路设计Designs or reviews analog front ends for neural recording headstages, covering noise budget, CMRR and ADC resolution. Use when choosing an amplifier or debugging a noisy front end.
- 脑机解码器长期稳定性Evaluates intracortical BCI decoders across days using zero-shot and few-shot regimes to quantify drift and recalibration cost. Use to assess decoder stability over sessions.
- 植入设备功耗热预算Budgets power, data rate and tissue heating for implanted or wireless neural interfaces against thermal screening limits. Use when sizing a high-channel-count implant design.
- NeuroKit2生理信号处理Processes physiological biosignals such as ECG, EEG, EDA, RSP, EMG and EOG with NeuroKit2, including HRV and complexity metrics. Use for psychophysiology or multi-modal signal analysis.
常见问题
外周神经刺激建模能做什么?
Models peripheral nerve stimulation with finite-element fields coupled to axon models to predict fiber recruitment and selectivity. Use when designing a nerve cuff or electrode layout。
如何安装外周神经刺激建模?
在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「外周神经刺激建模」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。
外周神经刺激建模需要哪些权限?
该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。
外周神经刺激建模经过官方审核吗?
是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。