科研 Skill

材料合成与加工路线规划

synthesis-processing

Covers materials synthesis and processing routes: solid-state synthesis, sol-gel, CVD/PVD, epitaxy. Use to plan how a sample is made, upstream of any characterization workflow.

发布者 Codar安全审核通过v0.1.0更新于 2026-11-18

SKILL.md

Synthesis and Processing

Overview

Every characterization skill in this repo analyzes a sample that came from somewhere — this skill is that somewhere. Synthesis route determines microstructure, phase purity, and defect density in ways that downstream characterization then measures; a poorly controlled synthesis produces a sample where characterization results reflect synthesis artifacts as much as the intended material.

When to use this skill

Activate when the request involves:

  • Solid-state synthesis, sol-gel, CVD, chemical vapor deposition, PVD, physical vapor deposition, sputtering, epitaxy, additive manufacturing, 3D printing (materials)
  • Terms: precursor, stoichiometry, calcination, annealing, deposition rate, substrate, growth rate
  • "Plan a synthesis route for...," "calculate precursor stoichiometry," "what deposition parameters..."

Core usage

Solid-state synthesis — stoichiometric precursor calculation

def solid_state_precursor_masses(target_formula_moles, precursor_molar_masses, target_mass_g, molar_mass_target):
    """target_formula_moles: dict of precursor -> stoichiometric coefficient in the
    target formula unit. Scales to a target sample mass."""
    total_moles_target = target_mass_g / molar_mass_target
    return {
        precursor: total_moles_target * coeff * precursor_molar_masses[precursor]
        for precursor, coeff in target_formula_moles.items()
    }

Sol-gel — precursor solution molarity and gelation planning

def sol_gel_precursor_volume(target_molarity, target_volume_ml, precursor_molarity_stock):
    """Dilution calculation for a stock precursor solution — standard sol-gel prep step."""
    return (target_molarity * target_volume_ml) / precursor_molarity_stock  # mL of stock needed

CVD/PVD — deposition rate and thickness planning

def deposition_time_for_thickness(target_thickness_nm, deposition_rate_nm_per_min):
    """Deposition rate must be calibrated per-tool/per-condition (see pitfalls) —
    this is planning arithmetic, not a substitute for that calibration."""
    return target_thickness_nm / deposition_rate_nm_per_min

Epitaxy — lattice mismatch calculation (a key screening step for substrate selection)

def lattice_mismatch_percent(film_lattice_parameter, substrate_lattice_parameter):
    """Large mismatch (~beyond a few %) drives strain relaxation via dislocations
    above a critical thickness — a first-order screening calculation before
    attempting epitaxial growth on a candidate substrate."""
    return ((film_lattice_parameter - substrate_lattice_parameter) / substrate_lattice_parameter) * 100

Validation & Pitfalls

Canonical references: West, Solid State Chemistry and its Applications (2nd ed., 2014), for solid-state synthesis; Ohring, Materials Science of Thin Films (2nd ed., 2001), for CVD/PVD/epitaxy.

  • Solid-state synthesis reaction completeness cannot be assumed from following a recipe — it must be verified (typically via diffraction to confirm phase purity, absence of unreacted precursor peaks). A characterization result on an incompletely reacted sample reflects a mixture, not the intended single phase, regardless of how carefully the recipe was followed.
  • Calcination/annealing atmosphere (air, inert, reducing) changes achievable oxidation states and phase stability — a synthesis recipe's atmosphere requirement is not incidental detail; running the "same" recipe in a different atmosphere can produce a different phase or oxidation state entirely.
  • Deposition rate calibration drifts with tool conditioning, target/source aging, and chamber cleanliness — a rate measured weeks or tool-cleanings ago is not reliable for precise thickness targeting; recalibrate (e.g. via a witness sample measured with microscopy or profilometry) before a thickness-critical deposition.
  • Epitaxial quality depends on more than lattice mismatch alone (thermal expansion mismatch, surface reconstruction, growth temperature/kinetics) — a favorable lattice-mismatch calculation is a necessary screening step, not a guarantee of good epitaxial quality; verify actual film quality via diffraction (rocking curve) and microscopy, not the mismatch calculation alone.
  • Precursor purity and stoichiometric calculation errors compound in multi-precursor syntheses — a small stoichiometry error in a complex (3+ precursor) solid-state or sol-gel synthesis can shift the product into a different region of a phase diagram entirely (see computational-materials/ materials-structure-analysis for phase-diagram tools to check target-composition stability before committing to a synthesis).

示例提示词

帮我规划这种薄膜材料的CVD沉积工艺路线以及后续加工步骤。

所属插件

材料表征、性能与材料信息学面向实验与数据驱动的材料研究:XRD/电镜/谱学/热分析/力学测试等表征,合成与加工,电化学与半导体表征,相场、CALPHAD 与连续介质力学,材料数据库、特征工程、贝叶斯优化与主动学习,选材与生命周期评价。

安装该插件会一并获得同领域的 42 个 Skill / MCP。

同插件的其他科研 Skill

常见问题

材料合成与加工路线规划能做什么?

Covers materials synthesis and processing routes: solid-state synthesis, sol-gel, CVD/PVD, epitaxy. Use to plan how a sample is made, upstream of any characterization workflow。

如何安装材料合成与加工路线规划?

在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「材料合成与加工路线规划」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。

材料合成与加工路线规划需要哪些权限?

该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。

材料合成与加工路线规划经过官方审核吗?

是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。