科研 Skill

电化学性能测试分析

electrochemistry

Covers electrochemical characterization: cyclic voltammetry, battery cycling analysis, EIS. Use for electrochemistry-specific data analysis distinct from general materials characterization.

发布者 Codar安全审核通过v0.1.0更新于 2026-11-18

SKILL.md

Electrochemistry

Overview

Electrochemical techniques probe redox behavior, energy storage performance, and corrosion susceptibility by measuring current/voltage/impedance response. Cyclic voltammetry identifies redox processes and their kinetics; battery cycling quantifies capacity, efficiency, and degradation over repeated charge/discharge; EIS separates different resistive/capacitive processes by their characteristic frequency response; corrosion testing quantifies material degradation in a electrolytic environment.

When to use this skill

Activate when the request involves:

  • Cyclic voltammetry, CV, battery cycling, capacity fade, Coulombic efficiency, EIS, impedance spectroscopy, corrosion, Tafel, polarization curve
  • Terms: Nyquist plot, equivalent circuit, C-rate, iR-drop, Randles circuit, corrosion current density
  • File formats: potentiostat exports (Biologic .mpr, Gamry .DTA, common CSV)
  • "Analyze this CV scan," "compute capacity fade from cycling data," "fit an equivalent circuit to this EIS"

Core usage

Cyclic voltammetry — peak identification and kinetics

import numpy as np
from scipy.signal import find_peaks

def cv_peak_analysis(potential, current, prominence=1e-5):
    """Identifies anodic (oxidation) and cathodic (reduction) peaks — separate
    passes since CV data has both forward and reverse scan directions."""
    ox_peaks, _ = find_peaks(current, prominence=prominence)
    red_peaks, _ = find_peaks(-current, prominence=prominence)
    return {"oxidation_peaks_V": potential[ox_peaks], "reduction_peaks_V": potential[red_peaks]}

def peak_separation_reversibility(e_pa, e_pc):
    """Peak-to-peak separation — ~59mV/n at 25C for an ideal reversible (Nernstian)
    one-electron process; larger separation indicates quasi-reversible/irreversible kinetics."""
    return abs(e_pa - e_pc) * 1000  # mV

Battery cycling — capacity fade and Coulombic efficiency

def coulombic_efficiency(charge_capacity, discharge_capacity):
    return (discharge_capacity / charge_capacity) * 100

def capacity_fade_analysis(cycle_number, discharge_capacity):
    """Capacity retention relative to an early-cycle baseline (not cycle 1, which
    often has formation-cycle artifacts) — see pitfalls."""
    baseline = discharge_capacity[2]  # e.g. cycle 3, past initial formation cycles
    retention_percent = (discharge_capacity / baseline) * 100
    return cycle_number, retention_percent

EIS — equivalent circuit fitting

from impedance.models.circuits import CustomCircuit

def fit_randles_circuit(frequencies, impedance_complex):
    """Randles circuit: solution resistance + charge-transfer resistance (parallel
    with double-layer capacitance) + Warburg diffusion — a standard starting model
    for a simple electrode process, not universally applicable (see pitfalls)."""
    circuit = CustomCircuit("R0-p(R1,C1)-W1", initial_guess=[10, 100, 1e-5, 100])
    circuit.fit(frequencies, impedance_complex)
    return circuit

Corrosion — Tafel analysis

def tafel_analysis(potential, log_current_density, linear_region_mask):
    """Linear (Tafel) regions of a polarization curve, extrapolated to the
    corrosion potential, give corrosion current density — the standard
    quantitative corrosion-rate measure."""
    slope, intercept = np.polyfit(potential[linear_region_mask], log_current_density[linear_region_mask], 1)
    return {"tafel_slope": slope, "intercept": intercept}

Validation & Pitfalls

Canonical references: Bard & Faulkner, Electrochemical Methods (2nd ed., 2001), for CV/general electrochemistry; Orazem & Tribollet, Electrochemical Impedance Spectroscopy (2nd ed., 2017), for EIS; ASTM G3/G59 for corrosion polarization conventions.

  • Uncompensated solution resistance (iR drop) shifts apparent potentials and must be corrected before kinetic interpretation — a CV or polarization curve without iR compensation gives systematically shifted peak/onset potentials, especially at high current or in low-conductivity electrolytes; confirm whether iR compensation was applied.
  • Early battery cycles (formation cycles) have distinct, non-representative behavior (SEI formation, initial irreversible capacity loss) — computing capacity fade relative to cycle 1 rather than a post-formation baseline (e.g. cycle 3-5) overstates apparent degradation; state which baseline was used.
  • EIS equivalent-circuit models are not unique — multiple different circuit topologies can fit the same impedance data comparably well, especially with limited frequency range or noisy data. A good fit (low residual) doesn't validate the physical model; the circuit elements should be physically motivated by the known electrochemical system, and fit quality checked via the Kramers-Kronig relations (a model-independent consistency check) before trusting extracted parameters.
  • Tafel slope extraction requires identifying a genuinely linear region, and the "linear region" choice is a real analytic decision that changes the extracted corrosion current — mass-transport limitations or multiple overlapping reactions can curve the polarization curve outside a narrow true Tafel region; report the potential window used for the linear fit.
  • C-rate (charge/discharge rate) strongly affects measured capacity, and capacity values at different C-rates aren't directly comparable — always report C-rate alongside any capacity value, and don't compare capacity fade trends measured at different rates as equivalent degradation measures.

示例提示词

帮我分析这组电池循环数据和阻抗谱,评估电极材料的衰减机制。

所属插件

材料表征、性能与材料信息学面向实验与数据驱动的材料研究:XRD/电镜/谱学/热分析/力学测试等表征,合成与加工,电化学与半导体表征,相场、CALPHAD 与连续介质力学,材料数据库、特征工程、贝叶斯优化与主动学习,选材与生命周期评价。

安装该插件会一并获得同领域的 42 个 Skill / MCP。

同插件的其他科研 Skill

常见问题

电化学性能测试分析能做什么?

Covers electrochemical characterization: cyclic voltammetry, battery cycling analysis, EIS. Use for electrochemistry-specific data analysis distinct from general materials characterization。

如何安装电化学性能测试分析?

在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「电化学性能测试分析」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。

电化学性能测试分析需要哪些权限?

该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。

电化学性能测试分析经过官方审核吗?

是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。