科研 Skill

半导体电学特性表征

semiconductor-characterization

Covers electrical characterization of semiconductors: Hall effect measurements, four-point-probe resistivity. Use for device transport-property analysis distinct from electrochemistry.

发布者 Codar安全审核通过v0.1.0更新于 2026-11-18

SKILL.md

Semiconductor Characterization

Overview

Semiconductor electrical characterization measures transport properties — carrier concentration, mobility, carrier type, resistivity — that determine device performance. Hall effect measurement and four-point probe resistivity are the two standard bulk/thin-film techniques; I-V and C-V measurements characterize fabricated devices (diodes, transistors, capacitor structures) directly. This is a different measurement class from electrochemistry (which covers electrolytic/redox systems, not solid-state carrier transport).

When to use this skill

Activate when the request involves:

  • Hall effect, Hall measurement, carrier concentration, carrier mobility, four-point probe, sheet resistance, resistivity, I-V curve, C-V curve, doping concentration
  • Terms: van der Pauw, Hall coefficient, n-type/p-type, depletion width, threshold voltage
  • "Compute carrier density from Hall data," "extract resistivity from four-point probe," "analyze this I-V curve"

Core usage

Hall effect — carrier density, mobility, and type

def hall_analysis(hall_voltage, current, magnetic_field, thickness, charge=1.602e-19):
    """Van der Pauw / standard Hall bar geometry. Sign of hall_voltage (with
    known current and field directions) determines carrier type — see pitfalls
    on getting sign conventions right."""
    sheet_carrier_density = (current * magnetic_field) / (charge * hall_voltage)
    carrier_density_3d = sheet_carrier_density / thickness
    carrier_type = "n-type" if hall_voltage > 0 else "p-type"  # convention-dependent — verify against your setup
    return {"sheet_carrier_density_per_m2": sheet_carrier_density, "carrier_density_per_m3": carrier_density_3d, "type": carrier_type}

def hall_mobility(sheet_resistance, sheet_carrier_density, charge=1.602e-19):
    return 1 / (charge * sheet_carrier_density * sheet_resistance)

Four-point probe — sheet resistance and resistivity

import numpy as np

def four_point_probe_sheet_resistance(voltage, current, geometric_correction_factor=4.532):
    """4.532 = pi/ln(2), the standard correction factor for a large, thin sample
    with equally spaced collinear probes — see pitfalls for when this doesn't apply."""
    return geometric_correction_factor * (voltage / current)  # ohms/square

def resistivity_from_sheet_resistance(sheet_resistance, thickness):
    return sheet_resistance * thickness

I-V curve — diode parameter extraction

from scipy.optimize import curve_fit
import numpy as np

def diode_equation(voltage, I0, n, T=300):
    """Shockley diode equation — extracts saturation current and ideality factor."""
    k_over_q = 8.617e-5  # eV/K (Boltzmann constant / elementary charge)
    return I0 * (np.exp(voltage / (n * k_over_q * T)) - 1)

def fit_diode_parameters(voltage, current):
    popt, _ = curve_fit(diode_equation, voltage, current, p0=[1e-12, 1.5], maxfev=5000)
    return {"saturation_current_I0": popt[0], "ideality_factor_n": popt[1]}

Validation & Pitfalls

Canonical references: ASTM F76 (standard test methods for Hall/resistivity measurements of semiconductors); Schroder, Semiconductor Material and Device Characterization (3rd ed., 2006).

  • Hall carrier-type sign convention depends on the specific current/field/voltage-probe geometry used, and getting it backwards silently reports the wrong carrier type — verify the sign convention against the specific measurement setup (not a remembered rule of thumb) before reporting n-type vs. p-type.
  • The four-point-probe geometric correction factor (π/ln2 above) assumes a specific geometry (semi-infinite thin sample, equally spaced collinear probes) — a small or non-standard sample geometry requires a different correction factor (finite-size corrections); using the standard factor on a sample that doesn't meet these assumptions produces a systematically wrong sheet resistance.
  • Contact quality (ohmic vs. non-ohmic/Schottky contacts) affects both Hall and four-point-probe measurements, and non-ohmic contacts can produce a nonlinear or asymmetric I-V response that biases results — verify ohmic contact behavior (linear I-V through the contacts) before trusting extracted transport parameters.
  • Measured mobility is an average over all carrier scattering mechanisms present (phonon, ionized-impurity, etc.) and is temperature-dependent — a mobility value without a stated measurement temperature is incomplete, and mobility values measured at different temperatures aren't directly comparable.
  • Diode ideality factor extraction is sensitive to the voltage range used for fitting — series resistance dominates at high forward bias and recombination-current effects dominate at low bias, distorting the ideal exponential region; fit only the voltage range where the diode equation's assumptions actually hold, and check the fit residual rather than fitting the full curve blindly.

示例提示词

帮我分析这片半导体的霍尔效应测试数据得到载流子浓度和迁移率。

所属插件

材料表征、性能与材料信息学面向实验与数据驱动的材料研究:XRD/电镜/谱学/热分析/力学测试等表征,合成与加工,电化学与半导体表征,相场、CALPHAD 与连续介质力学,材料数据库、特征工程、贝叶斯优化与主动学习,选材与生命周期评价。

安装该插件会一并获得同领域的 42 个 Skill / MCP。

同插件的其他科研 Skill

常见问题

半导体电学特性表征能做什么?

Covers electrical characterization of semiconductors: Hall effect measurements, four-point-probe resistivity. Use for device transport-property analysis distinct from electrochemistry。

如何安装半导体电学特性表征?

在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「半导体电学特性表征」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。

半导体电学特性表征需要哪些权限?

该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。

半导体电学特性表征经过官方审核吗?

是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。