科研 Skill

高分子材料表征

polymer-characterization

Covers polymer-specific characterization: GPC/SEC for molecular weight distribution, rheology. Use for polymer analysis distinct from small-molecule or inorganic materials workflows.

发布者 Codar安全审核通过v0.1.0更新于 2026-11-18

SKILL.md

Polymer Characterization

Overview

Polymers require characterization approaches that don't apply to small molecules or inorganic crystals: molecular weight is a distribution, not a single value (GPC/SEC), and mechanical response is viscoelastic — time/temperature/frequency-dependent — rather than the purely elastic response mechanical-testing's tensile framework assumes at short timescales. This skill covers what's polymer-specific; for glass transition/melting via DSC, see thermal-analysis (applies to polymers too, just not repeated here).

When to use this skill

Activate when the request involves:

  • GPC, SEC, gel permeation chromatography, size-exclusion chromatography, molecular weight distribution, PDI, rheology, DMA, dynamic mechanical analysis
  • Terms: Mn, Mw, polydispersity index, storage modulus, loss modulus, tan delta, viscoelasticity, time-temperature superposition
  • "Analyze this GPC trace," "compute molecular weight distribution," "interpret this DMA curve"

Core usage

GPC/SEC — molecular weight moments from a chromatogram

import numpy as np

def molecular_weight_moments(retention_time, intensity, calibration_curve):
    """calibration_curve: function mapping retention_time -> molecular weight,
    from a calibration standard set (e.g. narrow-PDI polystyrene standards) —
    GPC separates by hydrodynamic volume, not molecular weight directly, so this
    calibration step is required, not optional (see pitfalls)."""
    mw = calibration_curve(retention_time)
    weight_fraction = intensity / intensity.sum()

    mn = 1 / np.sum(weight_fraction / mw)              # number-average MW
    mw_avg = np.sum(weight_fraction * mw)                # weight-average MW
    pdi = mw_avg / mn                                     # polydispersity index (>=1; 1 = perfectly monodisperse)
    return {"Mn": mn, "Mw": mw_avg, "PDI": pdi}

Rheology — storage/loss modulus and tan delta from oscillatory shear

def viscoelastic_moduli(stress_amplitude, strain_amplitude, phase_angle_rad):
    """Oscillatory shear rheology: complex modulus decomposed into storage
    (elastic, in-phase) and loss (viscous, out-of-phase) components."""
    complex_modulus = stress_amplitude / strain_amplitude
    storage_modulus = complex_modulus * np.cos(phase_angle_rad)   # G'
    loss_modulus = complex_modulus * np.sin(phase_angle_rad)       # G''
    tan_delta = loss_modulus / storage_modulus                      # damping ratio
    return {"G_prime": storage_modulus, "G_double_prime": loss_modulus, "tan_delta": tan_delta}

DMA — glass transition from tan delta peak (an alternative to DSC's Tg)

from scipy.signal import find_peaks

def dma_tg_from_tan_delta(temperature, tan_delta):
    """DMA-derived Tg (tan delta peak) is typically higher than DSC-derived Tg
    (different physical definition — a mechanical vs. calorimetric transition) —
    don't treat them as interchangeable, see pitfalls."""
    peak_idx, _ = find_peaks(tan_delta)
    return temperature[peak_idx[np.argmax(tan_delta[peak_idx])]] if len(peak_idx) > 0 else None

Validation & Pitfalls

Canonical references: Striegel et al., Modern Size-Exclusion Liquid Chromatography (2nd ed., 2009); Ferry, Viscoelastic Properties of Polymers (3rd ed., 1980), for rheology/DMA.

  • GPC molecular weight is relative to the calibration standard, not absolute, unless measured with additional detectors (light scattering, viscometry) or a matched calibration standard. Polystyrene-calibrated GPC on a chemically different polymer (e.g. a polyolefin) gives "polystyrene-equivalent" molecular weight, which can differ substantially from true molecular weight — state this explicitly rather than reporting GPC Mn/Mw as if absolute.
  • PDI depends on the full distribution shape, not just Mn and Mw — two distributions with the same Mn/Mw/PDI can have meaningfully different shapes (bimodal vs. unimodal, for instance). Look at the full chromatogram/distribution, not just the summary moments, when distribution shape matters for the question being asked.
  • Tg from DMA (tan delta or loss modulus peak) and Tg from DSC are measuring different physical signatures and routinely differ by 10-20°C or more — this is not measurement error, it's a genuine difference in what's being detected (mechanical relaxation vs. heat capacity change). Report which technique produced a stated Tg, and don't treat DMA and DSC Tg values as directly comparable without acknowledging this.
  • Rheological and DMA measurements are strongly frequency- and temperature-dependent, and a single frequency/temperature measurement is a snapshot, not a complete characterization — time- temperature superposition (constructing a master curve from measurements at multiple temperatures) is standard practice for characterizing behavior across a wider effective frequency range than directly measurable; a single-condition measurement should be reported as such, not generalized.
  • Sample preparation (film thickness uniformity for DMA, complete dissolution for GPC) directly affects data quality in ways specific to polymers — incomplete dissolution in GPC systematically biases toward reporting only the soluble (often lower-MW or less-crosslinked) fraction; confirm and report dissolution completeness for cross-linked or high-MW samples.

示例提示词

我有一批聚合物样品需要做GPC分子量分布和动态力学分析。

所属插件

材料表征、性能与材料信息学面向实验与数据驱动的材料研究:XRD/电镜/谱学/热分析/力学测试等表征,合成与加工,电化学与半导体表征,相场、CALPHAD 与连续介质力学,材料数据库、特征工程、贝叶斯优化与主动学习,选材与生命周期评价。

安装该插件会一并获得同领域的 42 个 Skill / MCP。

同插件的其他科研 Skill

常见问题

高分子材料表征能做什么?

Covers polymer-specific characterization: GPC/SEC for molecular weight distribution, rheology. Use for polymer analysis distinct from small-molecule or inorganic materials workflows。

如何安装高分子材料表征?

在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「高分子材料表征」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。

高分子材料表征需要哪些权限?

该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。

高分子材料表征经过官方审核吗?

是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。