科研 Skill

热流体系统分析指导

thermal-fluid-analysis

Analyzes thermal-fluid systems, experiments, CFD, and correlations with explicit assumptions, validity limits, and uncertainty. Use for heat transfer or thermal-management analysis.

发布者 Codar安全审核通过v0.1.0更新于 2026-11-18

SKILL.md

Thermal-Fluid Analysis

Purpose

Develop decision-ready thermal-fluid analysis without separating numerical output from physical meaning. State what is measured, simulated, derived, assumed, or inferred; retain units, sign conventions, property states, system boundaries, and applicability limits.

Analysis Workflow

  1. Define the system: geometry, working fluid, operating regime, boundary conditions, performance metrics, and constraints.
  2. Establish the physical model: governing balances, material properties and their evaluation state, dimensionless groups, competing mechanisms, and expected limiting behavior.
  3. Select evidence: standards, handbooks, peer-reviewed work, calibrated measurements, validated CFD, or correlations inside their stated range.
  4. Test credibility: dimensional consistency, conservation, order of magnitude, limiting cases, uncertainty/sensitivity, and an independent analytical or empirical check where possible.
  5. Conclude by mechanism and tradeoff: performance, pressure drop or pumping power, manufacturability, reliability, cost, safety, scaling, and residual risk.

Experiments

Report the facility and specimen geometry, instrumentation, calibration, sampling, procedure, data reduction, heat-loss treatment, repeatability, uncertainty propagation, and exclusions. Distinguish sensor uncertainty from run-to-run variability. Do not call a preliminary demonstration validation without a stated comparison target.

CFD And Modeling

List all assumptions before presenting results and justify each one. State the domain, mesh and mesh-independence evidence, models, wall treatment, property models, boundary and initial conditions, solver/convergence criteria, time step where applicable, and validation data. Treat a converged solution as numerical evidence, not experimental proof.

Results Discussion

For each important figure, move through: what is plotted; what changes; the physical explanation; and comparison with literature, theory, or an independent data source. Do not merely restate a trend. Explain the regime, competing mechanisms, and the conditions under which the conclusion might fail.

Final Check

Before finalizing, check regime classification, property variation, phase state, coordinate/sign conventions, uncertainty, model validity, and safety or code constraints. Escalate unknown operating conditions that materially change the conclusion.

示例提示词

帮我分析这组换热器实验数据,明确假设和不确定度范围。

所属插件

工程分析、控制与工程科研面向工程科研通用方法:有限元分析、控制系统设计、信号处理与振动诊断、可靠性工程、离散事件仿真、ROS2 机器人、测量不确定度,以及热流体方向的工程科研选题、数据分析、论文写作与审稿互评。

安装该插件会一并获得同领域的 17 个 Skill / MCP。

同插件的其他科研 Skill

常见问题

热流体系统分析指导能做什么?

Analyzes thermal-fluid systems, experiments, CFD, and correlations with explicit assumptions, validity limits, and uncertainty. Use for heat transfer or thermal-management analysis。

如何安装热流体系统分析指导?

在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「热流体系统分析指导」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。

热流体系统分析指导需要哪些权限?

该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。

热流体系统分析指导经过官方审核吗?

是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。