科研 Skill
投稿前自我审稿预评估
self-review
Checks a manuscript before submission from a reviewer’s perspective, with leakage checks. Use when self-auditing one’s own manuscript ahead of submission.
SKILL.md
Self-Review Skill
Check the user's own manuscript before submission and produce an actionable list of anticipated reviewer comments, each with a specific fix — not a written review.
Optional Flags
--fix: after the report, apply fixes for every issue withfixable_by_ai: true, editing the manuscript in place, then report a diff summary. Never fixfixable_by_ai: falseissues (missing data, design flaws). Maximum 2 fix-and-re-review iterations; if the score is still below threshold after the second, stop and report what remains as structural (inside/write-paperthis routes to Phase 7.4a Audit Recovery).--json: also emit the structured JSON block (Phase 3c). Default when called from/write-paperPhase 7.--panel: run the multi-agent panel review (Phase 2.6) — domain-expert reviewers in parallel plus an editor synthesis — instead of the single-pass review. Opt-in and off by default, because it spawns N reviewer agents + 1 editor and costs several times more tokens; reserve it for a high-stakes final pass on a top-tier target. Do not combine with--fix: a panel diagnoses and prioritizes; run--fixas a separate pass once the author has triaged the panel's findings.
Severity Framing
- Fatal: a design flaw existing data cannot fix (data leakage that invalidates all results, no reference standard, label–feature circularity). Submission would likely be rejected. Reserve Fatal for true design-level problems.
- Fixable: significant but addressable with existing data (missing calibration, unclear exclusion criteria, absent CIs, incomplete reporting). Most issues are Fixable.
Two Objectives: the Floor and the Ceiling
The floor (categories A–K and the gates of Phases 2.5–2.5f) minimizes rejection-for-cause — fabricated citations, numbers that do not reconcile, overclaims, missing checklist items, leakage — and much of it works by adding a hedge, caveat, disclosure or audit trail. Iterated, that over-hardens a manuscript: every finding is correct, yet the whole reads as a defensive audit (over-hedged, audit trail in the body, Abstract buried under caveats, the strongest robustness result hidden in Limitations). The ceiling pass (category L / Phase 2.5g) runs after the floor gates, reads the accurate manuscript as a whole, and recommends only SUBTRACTION — REMOVE, MOVE, or TIGHTEN. It is advisory, never blocks, and cannot relax a floor gate. Report its findings as their own block (Phase 3), not folded into the "add this" comments. Phase 2.5i then reads the floor + ceiling state to declare the loop done, including a zero-edit PASS.
Workflow
Full steps for each part are in references/workflow/; open the one you need:
- Phase 1: Intake —
references/workflow/01-phase-1-intake.md: 1. Get the manuscript — PDF, Word doc, or pasted text. 2. Ask the user: target journal (sets reporting standards and scope); manuscript type (original research / review / perspective / technical note / letter / meta-analysis / case report)… - Phase 2: Systematic Check —
references/workflow/02-phase-2-systematic-check.md: Work every category the Research-Type Adaptation table (below) marks as applicable, and for each item decide whether a reviewer would raise it as a Major or Minor comment. The per-item check tables are in `references/phases/phase2_systemat… - Research-Type Adaptation —
references/workflow/03-research-type-adaptation.md: *Meta-analysis: replace C with heterogeneity (I², prediction intervals), publication bias (funnel plot, Egger), and sensitivity/subgroup analyses. - Phase 2.5: Numerical Cross-Verification (Internal) —
references/workflow/04-phase-2-5-numerical-cross-verification-internal.md: Before the report, verify internal consistency: - Phase 2.5a: Numerical Source-Fidelity Audit (External) —
references/workflow/05-phase-2-5a-numerical-source-fidelity-audit-exter.md: Numbers can be self-consistent everywhere and still wrong at the source; only a traversal back to the primary source catches that. First run the displayed-arithmetic gate — a stated difference must equal the subtraction of its two disp… - Phase 2.5a-2: Design & Power Statistic Provenance —
references/workflow/06-phase-2-5a-2-design-power-statistic-provenance.md: Applies only when the manuscript states a sample-size calculation, a power figure, or a detectable-effect claim. These are computed, not copied, so Phase 2.5a cannot check them: re-derive each from the manuscript's own inputs. A value not… - Phase 2.5b: Screening-Count Reconciliation from ID Sets (SR/MA + observational tier/stratum) —
references/workflow/07-phase-2-5b-screening-count-reconciliation-from-i.md: When to run: any SR/MA manuscript revision, at any stage (before Phase 3); or any observational manuscript presenting an ordinal tier / mutually-exclusive stratum split. Skip otherwise. A wrong prose total survives every other pass bec… - Phase 2.5c: Reference Scans (hallucination + adequacy) —
references/workflow/08-phase-2-5c-reference-scans-hallucination-adequac.md: 2.5c catches a citation that does not exist or has an invented first author; 2.5c-2 catches a claim with no citation. Both need a bibliography — skip them if there is norefs.biband no reference list. Run/verify-refs --strict… - Phase 2.5d: Cross-Reference QC (Manuscript ↔ rendered DOCX) —
references/workflow/09-phase-2-5d-cross-reference-qc-manuscript-rendere.md: In-text Table/Figure citations can resolve to a different caption in the rendered DOCX when the build script carries its own legacy SSOT; no other phase sees this. - Phase 2.5e: Confounding Completeness (observational only) —
references/workflow/10-phase-2-5e-confounding-completeness-observationa.md: When to run: observational manuscripts (cohort, case-control, cross-sectional, health-screening registry) whose central claim is an adjusted exposure–outcome association. **Skip for RCTs, diagnostic-accuracy, SR/MA, and descriptive stu… - Phase 2.5f: Claim-vs-Artifact Cross-Check —
references/workflow/11-phase-2-5f-claim-vs-artifact-cross-check.md: This phase checks claims against the artifacts they should trace to — the pre-registration, the protocol, the analysis outputs — where the prose is internally consistent yet disagrees with them. Run the gates (pass the supplement so the co… - Phase 2.5g: Editorial-Impression / Defensiveness Scan (the ceiling pass) —
references/workflow/12-phase-2-5g-editorial-impression-defensiveness-sc.md: Run this after the floor gates (Phases 2.5–2.5f): it reads the accurate manuscript and recommends what to take back out. It is advisory and non-blocking — it never produces a Major and never gates submission. - Phase 2.5h: Baseline Drift (anchor to the last human-approved version) —
references/workflow/13-phase-2-5h-baseline-drift-anchor-to-the-last-hum.md: Run after the ceiling pass and before the loop controller (Phase 2.5i). Each refine pass takes the previous AI output as its baseline, so framing bias compounds unseen; this gate compares the manuscript against the **last human-approve… - Phase 2.5i: Refinement Terminal-State (the loop controller) —
references/workflow/14-phase-2-5i-refinement-terminal-state-the-loop-co.md: Run this last, after the floor gates and the ceiling pass: it reads theirqc/*.jsonartifacts and classifies whether the review → revise → review loop is done, so an accurate manuscript is not over-hardened by a pass it does not need… - Phase 2.5j: Refinement Regression (fixed vs broke, across runs) —
references/workflow/15-phase-2-5j-refinement-regression-fixed-vs-broke.md: Run each round, after the loop controller. A revision that resolves finding X can introduce finding Y, and the pass-rate hides it; this step reads a run-history ledger (one line per run, theverdict@wherefingerprints of its findings) an… - Phase 2.6: Multi-Agent Panel Review (--panel, opt-in) —
references/workflow/16-phase-2-6-multi-agent-panel-review-panel-opt-in.md: Run this phase only when--panelis passed, after the numerical audits (Phases 2.5–2.5d) so the reviewers see source-verified numbers, and before the Phase 3 report, which it feeds. Two things bind before you spawn anything: the **SS… - Phase 3: Report —
references/workflow/17-phase-3-report.md: Before writing the comments, skimreferences/exemplar_findings/for the finding at hand (cohort-arithmetic mismatch, unadjusted confounder, cross-sectional scope overreach, post-hoc primary / estimand drift). Each models the full shape —… - Phase 3b: R0 Numbering (Optional) —
references/workflow/18-phase-3b-r0-numbering-optional.md: If the user plans to use/reviseonce real reviews arrive, offer to append R0-numbered output so they can later tell anticipated (R0) from novel (R1-only) comments: - Phase 3c: Structured JSON Output (--json) —
references/workflow/19-phase-3c-structured-json-output-json.md: Emit machine-readable JSON only when--jsonis passed (or another skill consumes this run): append the block to the report and also write it toqc/self_review.json. Readreferences/phases/phase3c_json_output.mdfor the schema, fi… - Phase 4: Fix Support (on request) —
references/workflow/20-phase-4-fix-support-on-request.md: The review ends at Phase 3. Readreferences/phases/phase4_fix_support.mdwhen--fixwas passed or the user asks you to apply or draft fixes for the findings.
示例提示词
帮我以审稿人视角挑一下这篇稿件可能被提的主要问题。
所属插件
安装该插件会一并获得同领域的 58 个 Skill / MCP。
同插件的其他科研 Skill
- 医学AI论文检索优化Optimizes a medical AI paper’s title, abstract and metadata for AI search engines. Use when a paper should be findable and citable by RAG tools and AI search.
- 临床数据统计分析与建模Generates reproducible Python or R code for clinical statistics and tables. Use when collected data needs Table 1, regression, survival or agreement analysis.
- 作者发表记录与策略分析Analyzes a PubMed author record to classify study types and authorship patterns. Use when planning a publication strategy from a researcher’s track record.
- 批量队列暴露结局分析Generates one cohort-analysis script per exposure-outcome pair from one template. Use when a validated method must run across many variable combinations at once.
- 样本量估算与检验效能Walks a decision tree to the right test and computes sample size with IRB text. Use when planning how many patients a study needs before data collection.
- 因果推断方法设计Runs DAG-based, instrumental-variable, difference-in-differences or RD analyses. Use when an association in observational data must support a causal claim.
- 报告规范逐条核查Audits a manuscript item by item against 49 reporting and risk-of-bias checklists. Use when checking a draft against STROBE, CONSORT, TRIPOD or similar guidelines.
- 临床数据清洗与画像Profiles a clinical dataset and generates cleaning code in staged, approved steps. Use when a CSV or Excel dataset needs missing-value and outlier checks before analysis.
- 跨国队列数据协调对比Harmonizes variables and runs parallel weighted analyses across national surveys like KNHANES and NHANES. Use when comparing one exposure-outcome link across countries.
- 变量定义与截断值溯源Maps exposure, outcome and covariate definitions to a cited guideline and DB columns. Use when variable cutoffs need a citable basis before the study protocol.
- 本地化临床数据脱敏Runs a local, network-free script that detects and removes identifiers from clinical data. Use when data may contain PHI and must be de-identified before LLM analysis.
- AI对标专家基准研究设计Plans the arms, rubrics, calibration probes and reviewer panel for an AI-vs-expert benchmark. Use before data collection when designing an AI-vs-human rating study.
- 放射影像AI研究设计审查Reviews a study’s analysis unit, cohort logic, leakage risk and reporting-guideline fit. Use when checking a clinical or medical-AI study design before drafting.
- 传染病仓室模型拟合Builds and fits SIR, SEIR and SEIHR compartmental models with Rt estimation. Use when an outbreak or epidemic’s spread needs mathematical modeling in Python.
- ICMJE利益冲突声明填写Clones a pre-filled synthetic ICMJE COI form, replacing only date, name and title. Use when each author on a submission needs a disclosure form filled quickly.
- 机构Word表单内容填充Fills an institutional Word form, such as an IRB protocol, without breaking its layout. Use when drafted content must be rendered into a CJK-aware .docx template.
- 队列数据库选题挖掘Profiles a longitudinal cohort database and ranks research-topic proposals with gap evidence. Use when looking for a question an available cohort or registry can answer.
- 投稿期刊匹配推荐Matches a manuscript abstract against curated journal profiles and ranks candidates. Use when choosing where to submit, or re-targeting after a rejection.
- DOI全文批量获取Batch-downloads open-access PDFs for a list of DOIs via Unpaywall, PMC and OpenAlex. Use when full texts are needed for a screening set such as a meta-analysis.
- 数据集编码本自动生成Profiles every variable in a tabular dataset into a structured, citable codebook. Use when a CSV, Excel or Stata dataset needs a data dictionary before analysis.
- 全球卫生数据获取分析Accesses and analyzes global health data from WHO GHO, IHME GBD and Our World in Data. Use when DALYs, age-standardized rates or choropleth maps are needed.
- 医学AI项目基金申请书撰写Structures a grant proposal’s significance, innovation, approach, aims and milestones. Use when drafting a research funding proposal, including a Korean grant plan.
- 卫生经济学评价建模Builds Markov cohort models with QALYs, PSA and cost-effectiveness planes. Use when a health intervention needs a formal cost-effectiveness evaluation.
- AI写作痕迹识别改写Scans a manuscript for AI writing patterns and rewrites flagged passages carefully. Use when a draft or response letter reads as obviously AI-written.
常见问题
投稿前自我审稿预评估能做什么?
Checks a manuscript before submission from a reviewer’s perspective, with leakage checks. Use when self-auditing one’s own manuscript ahead of submission。
如何安装投稿前自我审稿预评估?
在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「投稿前自我审稿预评估」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。
投稿前自我审稿预评估需要哪些权限?
该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。
投稿前自我审稿预评估经过官方审核吗?
是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。