科研 Skill
第一性原理声子谱计算
dft-phonons
Covers lattice dynamics from first principles: phonon dispersion, phonon DOS. Use when computing vibrational or thermodynamic properties from DFT.
SKILL.md
DFT Phonon Calculations
Description
This skill covers lattice dynamics from first principles: computing phonon dispersion curves, phonon density of states (PDOS), and thermal properties using the finite-displacement method (Phonopy + VASP/QE) and density functional perturbation theory (DFPT via Quantum ESPRESSO ph.x or VASP IBRION=7/8). It covers the full workflow from supercell construction and displaced-supercell DFT calculations through force constant extraction, acoustic sum rule enforcement, non-analytical corrections for polar materials, and phonon band structure post-processing. Invoke this skill when computing harmonic phonon properties, diagnosing dynamical instabilities, validating ML interatomic potentials against DFT phonons, or generating phonon reference data for materials databases.
Domain Context
Phonons are the quantum of lattice vibration. They are essential for predicting thermodynamic stability, heat capacity, thermal conductivity, electron-phonon coupling, and phase transitions. Two formally equivalent but practically distinct methods are used in DFT practice:
Finite-displacement (supercell) method: Construct symmetry-inequivalent displaced supercells → run DFT single-point calculations → extract forces → build real-space force constants → Fourier transform to get the dynamical matrix D(q) at arbitrary q-points → diagonalize to get phonon frequencies ω(q). Implemented by Phonopy, which is DFT-code-agnostic.
DFPT (Density Functional Perturbation Theory): Compute the response of the charge density to an atomic displacement as a perturbation at a given wavevector q directly, without supercells. Gives the dynamical matrix at specified q-points directly from a single calculation. Native to Quantum ESPRESSO (ph.x) and also available in VASP (IBRION=7/8). More expensive per q-point than finite displacement for a single structure but avoids the supercell approximation entirely.
Dynamical matrix: D_αβ(q) = (1/√(m_α m_β)) Σ_R Φ_αβ(0,R) e^{iq·R}, where Φ_αβ are the interatomic force constants (second derivatives of the total energy). Eigenvalues of D(q) give ω²(q,s) for each phonon branch s. Negative eigenvalues (imaginary frequencies) signal dynamical instability at that q-point.
Long-range interactions in polar materials: In ionic materials, the dynamical matrix has a long-range Coulomb contribution that causes a discontinuity at Γ between the longitudinal optical (LO) and transverse optical (TO) modes. This LO-TO splitting must be handled via the non-analytical correction (NAC), which requires the Born effective charge tensors Z* and the dielectric constant tensor ε∞. Both are computed via DFPT. Omitting NAC in polar materials produces qualitatively wrong phonon dispersions near Γ.
Acoustic sum rule (ASR): Translational invariance of the total energy requires that acoustic modes approach ω→0 as q→0. Numerically, ASR violations (acoustic modes at Γ with |ω| > ~1 cm⁻¹) indicate: insufficient force convergence (EDIFF too loose), real-space projection errors (LREAL=True in VASP), or broken crystal symmetry in the supercell setup. Phonopy and QE both offer ASR correction flags that impose the rule algebraically post-hoc; these should be used only when violations are small (< 5 cm⁻¹) and treated as a convergence diagnostic when violations are large.
Harmonic approximation: All methods here assume the potential energy surface is quadratic in atomic displacements. This breaks down at high temperature (strong anharmonicity), near phase transitions, and for systems with large zero-point motion (hydrogen-rich materials, light atoms). Thermal properties derived from harmonic phonons (free energy, entropy, Cv) are only reliable at T ≪ Tmelt for stiff materials, or require anharmonic corrections (quasi-harmonic approximation, SSCHA, TDEP) beyond this skill's scope. [EXPERT REVIEW NEEDED: temperature thresholds for harmonic approximation failure vary by material class]
When to Use This Skill
- Checking thermodynamic stability: imaginary acoustic modes at zone boundary = ground state is not the true minimum.
- Computing zero-point energy corrections to total energies.
- Predicting heat capacity Cv(T) and vibrational entropy for phase diagram construction.
- Validating that a relaxed structure is a true energy minimum (no imaginary modes at Γ or high-symmetry points).
- Generating phonon fingerprints for validating ML interatomic potentials against DFT.
- Computing Born effective charges and dielectric tensors for polar materials.
- Studying soft modes and structural phase transitions (e.g., perovskite tilting instabilities).
- Fitting interatomic force constants for thermal transport (κ) codes (ShengBTE, phono3py).
- Cross-referencing phonon dispersions against inelastic neutron scattering (INS) or Raman/IR data.
When Not to Use This Skill
- Strongly anharmonic systems at high T (e.g., BCC metals near melting, plastic crystals, H-rich hydrides): harmonic phonons are qualitatively wrong; use TDEP or SSCHA instead.
- Phonon linewidths or lifetime broadening (e.g., for thermal conductivity beyond RTA): requires third-order force constants; use phono3py skill.
- Electron-phonon coupling for superconductivity or resistivity: requires specialized DFPT (EPW code or QE
ph.x+elph). - Very large supercells (> 300 atoms) with Phonopy: finite-displacement DFT cost scales as N_displacements × cost_per_supercell; DFPT at a few q-points may be cheaper.
- Amorphous or disordered materials: phonon band structure is ill-defined; use phonon DOS from MD instead.
- Molecular systems in gas phase: use vibrational normal modes from a molecular Hessian, not periodic phonons.
Core Concepts
Force Constants and the Supercell Approach
The interatomic force constant (IFC) Φ_αβ(i,j) is the second derivative of the total energy with respect to displacements of atoms i and j in Cartesian directions α,β. In the finite-displacement method, it is approximated by:
Φ_αβ(i,j) ≈ -∂F_α(i)/∂u_β(j) ≈ -(F_α[+u] - F_α[-u]) / (2u)
where F_α[±u] is the force on atom i when atom j is displaced by ±u in direction β. Central differences (±displacement) roughly doubles the DFT cost but cancels odd-order anharmonic terms, giving more accurate force constants.
Phonopy generates the minimal set of symmetry-inequivalent displaced supercells automatically, runs DFT on each, collects forces, and constructs the full IFC matrix. The number of displaced supercells is typically 1–6 for high-symmetry crystals and 10–50+ for low-symmetry structures.
Supercell Size and Force Constant Cutoff
IFCs decay with interatomic distance, but the decay rate depends on the bonding character. Metals have slowly decaying IFCs (Friedel oscillations). Covalently bonded materials (Si, diamond) decay faster. Ionic materials have long-range Coulomb tails that must be handled separately via NAC.
The supercell must be large enough that the periodic image of the displaced atom is beyond the IFC cutoff. Rule of thumb: supercell dimensions ≥ 15 Å in each direction for insulators, ≥ 20 Å for metals. Always verify by comparing phonon dispersions from different supercell sizes. A practical test: if doubling the supercell changes any phonon frequency by > 1 cm⁻¹, the smaller supercell is not converged. [EXPERT REVIEW NEEDED: the 1 cm⁻¹ threshold is material-class dependent; soft phonon modes near instabilities require tighter convergence]
Displacement Amplitude
The displacement amplitude u must satisfy two competing requirements:
- Large enough to exceed DFT numerical noise: Forces must be computed accurately. With EDIFF=1e-8 in VASP, the force noise floor is ~1e-5 eV/Å. To get ~1% accuracy in the force, u ≥ 0.01 Å.
- Small enough to remain in the harmonic regime: Anharmonic contributions to the force scale as u². For most crystalline solids at equilibrium, u = 0.01–0.03 Å is safe.
Soft materials (zeolites, MOFs, soft phonon branches) may need u = 0.01 Å to stay harmonic. Hard materials (diamond, SiC) tolerate u = 0.03–0.05 Å. The Phonopy default (0.01 Å) is conservative and appropriate for most cases.
[EXPERT REVIEW NEEDED: for materials with very soft phonon branches near instabilities, even 0.01 Å may not stay harmonic; amplitude convergence testing is recommended]
Acoustic Sum Rule (ASR)
At Γ (q=0), the three acoustic modes must have ω=0. Violation magnitude:
- < 1 cm⁻¹: acceptable numerical noise; apply ASR correction algebraically
- 1–5 cm⁻¹: borderline; check LREAL setting, k-mesh, and EDIFF
-
5 cm⁻¹: problematic; indicates under-converged forces or broken supercell symmetry; must diagnose before trusting optical modes
Phonopy applies ASR via phonopy --fc-symmetry (symmetrizes force constants) or through the FORCE_CONSTANTS file post-processing. QE applies ASR via asr='crystal' in the matdyn.x input.
Non-Analytical Correction (NAC) for Polar Materials
In polar materials (most oxides, halides, III-V semiconductors), the dynamical matrix at q→0 has a singular non-analytical term:
D_NAC(q→0) ∝ (q · Z*_α)(q · Z*_β) / (q · ε∞ · q)
This term is direction-dependent: the LO-TO splitting depends on the direction of q as q→0. The magnitude of LO-TO splitting is proportional to (Z*)² / ε∞. For BaTiO3, LO-TO splitting at Γ can exceed 100 cm⁻¹.
NAC is absent if:
- Z* and ε∞ are not provided (will get wrong phonons near Γ)
- The material is centrosymmetric but piezoelectric (NAC applies even without a permanent dipole)
- The material is a metal (no NAC; dielectric screening is complete)
For Phonopy + VASP: run a separate DFPT calculation with LEPSILON=True to get OUTCAR with Born charges and dielectric tensor, then parse with phonopy-vasp-born.
For QE: ph.x computes both phonons and Born charges/dielectric tensor in one run when epsil=.true. is set.
Phonon Band Structure and DOS
Band structure: Evaluate phonon frequencies along a high-symmetry path in the Brillouin zone. The path is material-specific and should follow the standard reciprocal space conventions (Setyawan-Curtarolo). Phonopy band.conf or pymatgen HighSymmKpath generates the path.
Phonon DOS (PDOS): Integrate phonon frequencies over the full BZ. Resolution depends on the q-mesh density. For smooth PDOS, a 20×20×20 q-mesh is often needed; convergence must be checked. Projected PDOS (element-resolved) identifies which atoms contribute to which frequency regions and is essential for understanding thermal properties.
Thermal properties: From the harmonic PDOS, compute:
- Helmholtz free energy F(T) = E_0 + kT ∫g(ω)ln(2sinh(ℏω/2kT))dω
- Entropy S(T), heat capacity Cv(T)
Valid in the harmonic approximation (see caveats above). Phonopy
thermal_properties.yamlgives these directly.
Key Workflows
Full steps for each part are in references/key-workflows/; open the one you need:
- Workflow 1: VASP + Phonopy Finite-Displacement Workflow —
references/key-workflows/01-workflow-1-vasp-phonopy-finite-displacement-work.md: This is the most common workflow for VASP users. Phonopy generates displaced supercells, VASP computes forces on each, Phonopy assembles the force constants. - Workflow 2: Born Effective Charges and NAC for Polar Materials (VASP) —
references/key-workflows/02-workflow-2-born-effective-charges-and-nac-for-po.md: For polar (non-centrosymmetric or ionic) materials, always compute Born effective charges and include NAC in phonon post-processing. Omitting NAC produces wrong LO-TO splitting near Γ. - Workflow 3: DFPT Phonons with Quantum ESPRESSO —
references/key-workflows/03-workflow-3-dfpt-phonons-with-quantum-espresso.md: QE'sph.xcomputes the dynamical matrix directly via linear response, without supercells. This is the preferred method when Γ-point phonons, Born charges, and dielectric tensor are all needed in a single calculation. - Workflow 4: Supercell Size Convergence Test —
references/key-workflows/04-workflow-4-supercell-size-convergence-test.md: Never trust phonon results from a single supercell size. Always check convergence. - Workflow 5: Imaginary Mode Diagnosis —
references/key-workflows/05-workflow-5-imaginary-mode-diagnosis.md: Imaginary phonon frequencies (negative ω² → reported as negative values by Phonopy and QE) can have physical or numerical origin. Distinguishing them is critical before interpreting results. - Workflow 6: MLP Phonon Validation Against DFT —
references/key-workflows/06-workflow-6-mlp-phonon-validation-against-dft.md: Phonon dispersions are among the most sensitive tests of an ML interatomic potential. A potential that perfectly reproduces energies and forces on the training set may still produce qualitatively wrong phonon dispersions if the curvature o… - Workflow 7: Phonon Convergence Checklist —
references/key-workflows/07-workflow-7-phonon-convergence-checklist.md
Common Failure Modes
| Failure Mode | Symptoms | Diagnosis | Fix |
|---|---|---|---|
| LREAL=True in VASP | ASR violations 2–20 cm⁻¹; acoustic modes non-zero at Γ; seemingly random optical mode errors | Check INCAR for LREAL=T or LREAL=Auto | Set LREAL=False in all displaced-supercell INCARs |
| EDIFF too loose | ASR violations > 5 cm⁻¹; forces noisy at 1e-5 eV/Å level; low-frequency modes worst affected | Check EDIFF in INCAR; compare forces between ±displacement | Set EDIFF=1e-8 for phonon calculations |
| Supercell too small | Zone-boundary modes poorly converged; artificial dispersion; modes differ between supercell sizes | Compare 2×2×2 vs 3×3×3 phonons; check IFC magnitude at boundary | Increase supercell until phonon frequencies converge to < 1 cm⁻¹ |
| Missing NAC in polar material | LO-TO splitting absent at Γ; phonon bands from all directions merge at Γ instead of splitting | Check if material is polar/ionic; compare TO/LO frequencies | Compute Born charges (LEPSILON=True or ph.x epsil=.true.) and add BORN file |
| Displacement too large | Anharmonic contamination; phonon frequencies depend on displacement amplitude | Rerun with u=0.005, 0.01, 0.02 Å and compare | Use u=0.01 Å as default; reduce to 0.005 Å for soft materials |
| ENCUT too low (Pulay stress) | Systematic frequency errors; forces artificially large; errors scale with volume distortion | Test with ENCUT 20% higher; check pressure in OUTCAR | Increase ENCUT to at least 550 eV or 1.3× ENMAX from POTCAR |
| SIGMA too large (metals) | Optical mode frequencies wrong by 10–30%; temperature-dependent fictitious contributions to forces | Check SIGMA value; compare with SIGMA=0.01 | Use SIGMA≤0.05 eV; ISMEAR=0 for insulators, ISMEAR=1 for metals |
| Structure not fully relaxed | Imaginary modes at Γ (optical); non-zero forces in OUTCAR before displacement | Check residual forces in relaxed POSCAR (EDIFFG convergence) | Tighten relaxation to EDIFFG=-1e-4 or -5e-4; use ISIF=3 |
| Wrong supercell symmetry | Missing/duplicate displacements; wrong number of force sets | Count displaced supercells vs Phonopy expected; check Phonopy output for symmetry detection | Ensure primitive cell is correct; use POSCAR with standard orientation |
| ibrav > 0 in QE | Silent unit cell errors; wrong k-path; non-standard lattice vectors | Use ibrav=0 with explicit CELL_PARAMETERS | Switch to ibrav=0 for all phonon calculations |
| degauss in Ry vs eV confusion (QE) | Smearing 13.6× too large; metallic occupation errors; forces wrong | Check degauss value; 0.01 Ry = 0.136 eV | Remember: QE uses Ry; 0.01 Ry ≈ 0.14 eV; 0.01 eV ≈ 0.00073 Ry |
| NPAR ≠ 1 for LEPSILON in VASP | VASP fails with error about parallelization incompatibility | Check VASP error output | Set NPAR=1 (or remove NPAR) for LEPSILON=True runs |
| Soft mode confused with numerical noise | Apparent imaginary mode at < 5i cm⁻¹ interpreted as instability | Check consistency across supercell sizes; compare with DFPT | Below ~5 cm⁻¹ imaginary is often numerical; > 20 cm⁻¹ is likely physical |
| MLP phonons with imaginary Γ modes | Stable crystal shows imaginary acoustic or optical modes with MLP | Compare DFT phonons; check training data coverage | Add harmonic force constant data or displaced supercell structures to training set |
| Unconverged DFPT (QE ph.x) | ph.x runs many iterations without convergence; warnings about convergence in ph.out | Check tr2_ph; tighten conv_thr in SCF | Tighten conv_thr to 1e-12 in scf.in; tighten tr2_ph to 1e-16; ensure SCF is fully converged first |
Best Practices
Before starting:
- Always fully relax the structure to EDIFFG=-1e-4 eV/Å or tighter with ISIF=3 (cell shape and volume) before computing phonons. Do not compute phonons at a compressed or artificially strained geometry — use the equilibrium volume.
- Verify the relaxed structure has the expected symmetry (
spgliborphonopy --symmetry). Accidental symmetry breaking in the POSCAR will generate wrong displacements. - Run a preliminary SCF with EDIFF=1e-8 and LREAL=False on the undisplaced supercell and confirm forces < 5×10⁻³ eV/Å. If residual forces are larger, the relaxation is not converged enough for phonon calculations.
Supercell construction:
- Use the smallest supercell where all periodic image distances are > 15 Å (insulators) or > 20 Å (metals). Phonopy's
phonopy --dimsuggestion is a starting point, not a guarantee. - Always run convergence tests with at least two supercell sizes before reporting results.
- For non-cubic systems, choose supercell dimensions to keep all three lengths comparable and all > 15 Å.
INCAR for displaced supercells (VASP):
- LREAL=False is non-negotiable for phonon force calculations.
- ADDGRID=True reduces charge density interpolation error.
- ALGO=Normal (Davidson); avoid ALGO=Fast or All for large supercells.
- LWAVE=False, LCHARG=False to reduce I/O — these are single-point calculations.
- NSW=0, IBRION=-1 — do not relax the displaced supercells.
K-mesh for supercells:
- The supercell k-mesh is coarser than the primitive cell k-mesh by the supercell multiplicity. A 3×3×3 supercell needs a k-mesh ~1/3 as dense per dimension as the converged primitive cell mesh.
- For insulators: Γ-point only (1×1×1) is often sufficient for large (> 200 atom) supercells.
- For metals: use at least 2×2×2 with Methfessel-Paxton smearing. Verify k-mesh convergence of forces (not just energies).
Polar materials:
- Always check if your material is polar before interpreting phonon results near Γ.
- Run a separate LEPSILON=True calculation (VASP) or include epsil=.true. in ph.in (QE).
- Verify Born charge sum rule: Σ_i Z*_i = 0 (for neutral primitive cell). Large violations indicate a poorly converged Born charge calculation.
- Acoustic sum rule and NAC are applied independently; apply both.
MLP validation:
- Always compare MLP phonons to DFT phonons on the same structure and with the same phonopy settings (same supercell, same displacement amplitude, same primitive cell).
- A RMSE < 10 cm⁻¹ across all branches is an excellent MLP. RMSE > 50 cm⁻¹ indicates the MLP needs more training data or retraining.
- Imaginary modes in MLP but not DFT is a hard failure and must be fixed before using the MLP for any dynamical property.
Reporting:
- Always report supercell size, displacement amplitude, ENCUT, EDIFF, k-mesh, and whether NAC was applied.
- Report ASR violation magnitude (max acoustic frequency at Γ before ASR correction).
- Phonon band structure plots should include a horizontal line at ω=0 to make any imaginary modes visible.
Integration with Other Skills
Upstream dependencies (must be completed before phonon calculations):
- VASP Workflow — structural relaxation (ISIF=3 to equilibrium volume), SCF convergence, POTCAR selection, and job submission patterns. Phonon calculations require a fully relaxed structure from the VASP workflow.
- DFT Convergence — ENCUT, k-mesh, and EDIFF convergence protocols. Phonon-specific convergence parameters (ENCUT≥550, EDIFF=1e-8, k-mesh 2× denser than energy-converged) are defined there.
- Quantum ESPRESSO Workflow — QE-specific convergence, pseudopotential selection, and
ph.xDFPT workflow. The DFPT workflow in this skill (Workflow 3) supplements the QE skill.
Downstream consumers (phonon outputs feed into):
- MLP Validation — phonon dispersions are a primary validation metric for ML potentials. The
compare_phonons()function in Workflow 6 produces the key metrics referenced in the MLP validation skill. - MACE Training — phonon-based active learning: displaced supercells with large force errors can be added to the training set to improve MLP phonon accuracy. [FORWARD REFERENCE — skill not yet created]
- DFT Dataset Generation — phonon displaced supercells are a standard component of DFT training datasets for MLPs. This skill provides the force calculation protocol for those structures.
Related domain skills:
- DFT Surfaces — surface phonons require slab supercells; imaginary surface acoustic modes distinguish surface reconstruction from slab thickness artifacts. [FORWARD REFERENCE — skill not yet created]
- DFT Defects — defect-induced local vibrational modes (LVM) require phonon calculations on defect supercells; convergence requires very large supercells. [FORWARD REFERENCE — skill not yet created]
- Reproducibility Workflow — phonon calculations involve many input files (INCAR, POSCAR, POTCAR, KPOINTS, phonopy.yaml, BORN) that must be versioned and archived together for reproducibility.
Data and visualization:
- Scientific Visualization — phonon band structure and DOS plotting conventions, color schemes for projected PDOS, and comparison figures for MLP vs DFT phonon validation. [FORWARD REFERENCE — skill not yet created]
- Pymatgen Analysis — structure handling, high-symmetry k-path generation (
HighSymmKpath), and cross-referencing computed phonons against Materials Project phonon database. [FORWARD REFERENCE — skill not yet created] - ASE Framework — ASE calculators for MLP phonon calculations (Workflow 6); building supercell structures programmatically; converting between ASE and Phonopy structure formats. [FORWARD REFERENCE — skill not yet created]
Key References
- Phonopy documentation: https://phonopy.github.io/phonopy/ — comprehensive reference for finite-displacement methodology, BORN file format, band structure path generation, and thermal properties.
- Togo & Tanaka (2015): "First principles phonon calculations in materials science." Scripta Materialia 108, 1–5. The primary Phonopy reference; must be cited when using Phonopy.
- Baroni et al. (2001): "Phonons and related crystal properties from density-functional perturbation theory." Rev. Mod. Phys. 73, 515. Foundational DFPT theory reference.
- Wang et al. (2010): "Mixed-space approach for calculation of vibration-induced dipole-dipole interactions." Phys. Rev. B 85, 224303. NAC implementation used in Phonopy.
- Setyawan & Curtarolo (2010): "High-throughput electronic band structure calculations: Challenges and tools." Comput. Mater. Sci. 49, 299–312. Standard Brillouin zone path conventions.
- SSSP library: https://www.materialscloud.org/discover/sssp — SSSP efficiency and precision pseudopotential libraries for QE; required to cite when using SSSP pseudopotentials.
- PseudoDojo: http://www.pseudo-dojo.org/ — systematic norm-conserving pseudopotentials; required for spin-orbit coupling calculations.
- Quantum ESPRESSO: Giannozzi et al. (2009, 2017, 2020) — three QE papers covering the codebase evolution; all should be cited for ph.x DFPT calculations.
[EXPERT REVIEW NEEDED: Verify that the displacement amplitude guidance (0.01–0.03 Å range) applies to all mentioned material classes, particularly hydrides and van der Waals materials where harmonic regime may be narrower. Confirm whether 1 cm⁻¹ ASR threshold is appropriate for very soft phonon branches. Review RMSE thresholds for MLP phonon quality assessment — these are based on community practice and may need adjustment for specific applications.]
示例提示词
我想用Phonopy结合VASP计算这个超胞的声子色散和热力学性质。
所属插件
安装该插件会一并获得同领域的 35 个 Skill / MCP。
同插件的其他科研 Skill
- 主动学习构建机器学习势训练集Runs active-learning workflows for ML interatomic potentials: uncertainty-guided MD exploration, DFT oracle labeling, query strategy. Use when expanding an MLP training set.
- AiiDA计算工作流管理Covers AiiDA, a provenance-first Python workflow engine for computational materials science: calculation input generation, remote submission. Use when orchestrating reproducible DFT/MD campaigns.
- ASE原子模拟环境Covers the Atomic Simulation Environment (ASE) as an atomistic workflow hub: Atoms objects, calculators, optimizers, trajectories. Use when scripting or converting structures across DFT/MD codes.
- 粗粒化分子动力学模拟Covers coarse-grained molecular dynamics: mapping atomistic structures to CG beads, parameterizing Martini/IBI/force-matching force fields. Use when atomistic timescales are too short.
- CP2K第一性原理分子动力学Covers end-to-end DFT, AIMD, and atomistic workflows with CP2K using the Gaussian-and-plane-waves method: input construction, convergence testing. Use for CP2K-based simulations.
- 扩散模型生成晶体结构Covers de novo crystal structure generation with score-based diffusion and flow-matching models (MatterGen, DiffCSP, CDVAE). Use when generating candidate structures, not analyzing existing ones.
- 晶体图神经网络性质预测Covers graph neural networks for crystal and periodic-material property prediction: crystal graph construction, periodic neighbor finding. Use when building GNN property predictors for crystals.
- 平面波DFT收敛性测试Covers systematic convergence testing for plane-wave DFT: cutoff energy, k-point mesh density, smearing. Use before trusting DFT energies, forces, or derived properties as converged.
- 机器学习势DFT数据集生成Covers generating DFT-labeled datasets for training ML interatomic potentials: configuration-space coverage. Use when building an MLP training dataset from scratch.
- 点缺陷第一性原理计算Covers first-principles point-defect modeling: vacancy/interstitial/antisite/substitutional construction, charge-state calculations. Use for defect thermodynamics studies.
- 表面模型DFT计算Covers surface slab model construction and DFT calculation: Miller-index generation, termination selection, slab/vacuum convergence. Use for surface science and catalysis DFT studies.
- 弹性常数计算工作流Computes single-crystal and polycrystalline elastic constants from DFT or MD stress-strain data and checks mechanical stability. Use when deriving stiffness tensors or bulk/shear modulus.
- 增强采样自由能计算Covers enhanced sampling methods for atomistic MD (metadynamics, umbrella sampling. Use for rare-event or slow-transition sampling.
- 状态方程拟合Covers equation-of-state fitting from DFT/ML-potential energy-volume data: Birch-Murnaghan, Vinet, and Murnaghan forms. Use when fitting an EOS to compression data.
- 机器学习势微调迁移训练Covers fine-tuning pretrained universal ML interatomic potentials on system-specific DFT data. Use when adapting a universal MLP to a new system.
- 分子动力学自由能计算Covers quantitative free-energy calculations from MD: alchemical FEP/TI/BAR/MBAR, umbrella-sampling PMF. Use when computing thermodynamic free energies from simulation.
- GROMACS分子动力学工作流Covers end-to-end MD simulations with GROMACS: topology/.mdp construction, energy minimization, NVT/NPT equilibration. Use for GROMACS-based biomolecular or materials MD.
- 高通量DFT自动化筛选Covers automated large-scale DFT screening: workflow graphs with atomate2/jobflow/AiiDA, input-set standardization, custodian error handling. Use for high-throughput DFT screening campaigns.
- LAMMPS分子动力学工作流Covers end-to-end MD simulations with LAMMPS: input script anatomy, force-field deployment, ensemble control, equilibration. Use for LAMMPS-based classical molecular dynamics.
- MACE机器学习势训练Covers training MACE machine-learned interatomic potentials: extxyz dataset preparation, isolated-atom energies, train/val/test splitting. Use for MACE-specific MLP training workflows.
- MatGL图神经网络框架Covers building, applying, validating, and fine-tuning MatGL graph-neural-network models for property prediction and interatomic potentials. Use for pretrained GNN workflows via MatGL.
- 分子动力学轨迹后处理分析Covers quantitative post-processing of atomistic MD trajectories: loading LAMMPS/GROMACS/ASE trajectories and computing RDF, coordination numbers. Use for structural MD trajectory analysis.
- 分子动力学平衡过程设计Covers bringing an atomistic simulation from its initial configuration to a representative equilibrium state before production statistics: ensemble. Use before collecting production MD data.
- 分子动力学力场选型验证Covers selection, validation, and deployment of classical interatomic force fields for MD: physical basis and transferability limits of EAM, MEAM, Tersoff. Use when choosing a force field.
常见问题
第一性原理声子谱计算能做什么?
Covers lattice dynamics from first principles: phonon dispersion, phonon DOS. Use when computing vibrational or thermodynamic properties from DFT。
如何安装第一性原理声子谱计算?
在科搭 Codar 左侧点击「插件」,在「组件」页签搜索「第一性原理声子谱计算」并安装;在 Claude Code 或 Codex 中可以发送本页的安装提示词,或下载 Skill 包后解压到 ~/.claude/skills 或 ~/.codex/skills。
第一性原理声子谱计算需要哪些权限?
该科研 Skill没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。
第一性原理声子谱计算经过官方审核吗?
是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。