科研插件
转录组学
RNA测序、表达、剪接与转录调控分析。
README
转录组学:Skill 导航与方法比较
本 README 按任务而不是按来源组织 Skill。表中的入口完成相同或相近任务, 但算法假设、输入格式、计算资源和输出不同;它们是选择关系,不是待删除副本。 除非表格明确说明,描述不构成跨数据集 benchmark,实际选择仍应结合数据与版本验证。
使用方法
- 先定位任务族,再按“重点比较”判断数据、目标和资源约束。
- 打开候选
SKILL.md核对命令、输入输出和陷阱;不要只凭工具名选择。 - 对模型类方法优先保留独立验证集或第二模型共识;对统计方法先核对假设。
RNA-seq 定量
共同目标:围绕“RNA-seq 定量”完成同一分析环节;以下入口保留不同算法、工具或工作流。
重点比较:比较基因组比对后计数与准比对转录本定量,关注 isoform 分辨率、偏倚校正和输出单位。
本任务族共有 7 个独立入口、7 个名称。
| Skill | 技术路线/资源标签 | 适用范围与主要差异 |
|---|---|---|
kallisto-bustools-单细胞定量 | CLI | 使用 kallisto | bustools 单细胞定量 把原始计数整理为保留审计轨迹的分析对象。适用于进行细胞/基因 QC、归一化、高变基因、PCA 和邻居图准备;ambient RNA、doublet、批次整合和细胞注释需要单独的方法选择,不能被一个固定阈值模板代替。 |
RNA-seq-定量-selective-比对 | 单细胞、短读长 | Use when you have paired-end or single-end RNA-seq reads (FASTQ format) and a reference transcriptome (FASTA), and you need to estimate transcript-level abundances (NumReads and TPM per transcript) rather than gene-leve… |
RNA-seq-验证 | 单细胞、短读长 | Use when you have quantification output from two versions or implementations of the same tool (e.g., C++ vs. Rust rewrites, pre- and post-bugfix releases) and need to verify that they produce equivalent results before d… |
salmon-output-解析 | R/Bioconductor | Use when when you have salmon quant.sf.gz output files from pseudoalignment-based transcript quantification and need to convert transcript-level abundance estimates and counts into gene-level matrices for differential e… |
salmon-定量-output-verification | 读取入口说明确认依赖与输入 | Use when after running salmon quant with the --writeMappings/-z flag to produce SAM output, or when investigating discrepancies between the number of mapped reads reported in quant.sf and the actual number of records wr… |
Salmon-伪对齐 | R/Bioconductor、Python、CLI | Ultra-fast RNA-seq transcript/gene quantification via quasi-mapping (no BAM). Builds a k-mer index from transcriptome FASTA, quantifies in minutes. Outputs TPM/count tables (quant.sf) with optional GC- and sequence-bias… |
转录本-丰度-定量-salmon | 读取入口说明确认依赖与输入 | Use when you have adapter-trimmed FASTQ files and need to obtain transcript-level |
差异表达
共同目标:围绕“差异表达”完成同一分析环节;以下入口保留不同算法、工具或工作流。
重点比较:比较负二项、voom/线性模型和非参数方法,重点核对重复结构、批次、设计矩阵和多重检验。
本任务族共有 42 个独立入口、42 个名称。
| Skill | 技术路线/资源标签 | 适用范围与主要差异 |
|---|---|---|
DESeq2-进行差异表达分析 | R/Bioconductor | Perform differential expression analysis using DESeq2 in R/Bioconductor. Use for analyzing RNA-seq count data, creating DESeqDataSet objects, running the DESeq workflow, and extracting results with log fold change shrin… |
edgeR-进行差异表达分析 | R/Bioconductor | Perform differential expression analysis using edgeR in R/Bioconductor. Use for analyzing RNA-seq count data with the quasi-likelihood F-test framework, creating DGEList objects, normalization, dispersion estimation, an… |
DESeq2-差异表达分析 | R/Bioconductor、Python | Performs differential expression on bulk RNA-seq count data with DESeq2's negative-binomial GLM, Wald and LRT testing, apeglm/ashr/normal LFC shrinkage, independent filtering, Cook's outlier handling, VST/rlog transform… |
edgeR-差异表达分析 | R/Bioconductor | Performs differential expression on bulk RNA-seq count data with edgeR's negative-binomial GLM and quasi-likelihood F-test framework. Covers DGEList construction, filterByExpr, TMM/TMMwsp normalization, robust dispersio… |
Time-Series-差异表达分析 | R/Bioconductor | Analyzes time-series and longitudinal RNA-seq for differential expression and trajectory structure. Covers DESeq2 LRT with reduced models, time as factor vs continuous vs natural splines, maSigPro (Nueda 2014 for RNA-se… |
Time-Series-差异表达分析 | R/Bioconductor | Analyze time-series RNA-seq data using limma voom with splines, maSigPro, and ImpulseDE2. Identify genes with dynamic expression patterns. Use when analyzing time-series or longitudinal expression data. |
此技能从 | R/Bioconductor | Identifies differential m6A methylation between conditions from MeRIP-seq paired IP/input data using exomePeak2 (GC-bias-aware differential via its bam_ip/bam_input control + bam_treated_ip/bam_treated_input treatment a… |
设计 | R/Bioconductor | Designs genomics experiments so technical nuisance variation (batch, lane, plate, flow cell, operator, reagent lot, processing day) is balanced against the biological variable of interest and therefore estimable rather… |
分析-设计 | R/Bioconductor、单细胞 | Calculates statistical power for high-dimensional genomics experiments (bulk RNA-seq, scRNA-seq, ATAC-seq, ChIP-seq, methylation, proteomics) under negative-binomial count models using RNASeqPower, PROPER, and simulatio… |
Hi-C-分析 | R/Bioconductor、Python、CLI | Compares Hi-C contact maps between conditions across the right scale -- differential bin-pair contacts (multiHiCcompare, diffHic), differential A/B compartments (dcHiC), differential TAD boundaries (delta insulation), a… |
在三个层次上对自下而上的蛋白质组学进行质量控制 | R/Bioconductor、Python | Quality control for bottom-up proteomics across three levels -- instrument/raw-signal (mass accuracy, RT/iRT fit, FWHM, TIC vs injection time, % MS2 identified), identification/run (missed cleavages, charge states, PTM… |
蛋白质组学数据的质量控制和评估 | R/Bioconductor、Python | Quality control and assessment for proteomics data. Use when evaluating proteomics data quality before downstream analysis. Covers sample metrics, missing value patterns, replicate correlation, batch effects, and intens… |
ORF-中检测并量化翻译的 | R/Bioconductor、Python、CLI | Detect and quantify translated ORFs from Ribo-seq using 3-nucleotide periodicity, including uORFs, internal ORFs, dORFs, and novel ORFs. Use when finding actively translated regions beyond annotated CDS, classifying ORF… |
ORF-RiboCode和ORFquant从Ribos | R/Bioconductor、Python、CLI | Detect and quantify translated ORFs from Ribo-seq data including uORFs and novel ORFs using RiboCode and ORFquant. Use when identifying translated regions beyond annotated coding sequences or quantifying ORF-level trans… |
在差异表达之前对 | R/Bioconductor、Python | Quality control and exploration of RNA-seq count matrices before differential expression. Use when checking library sizes and composition, choosing VST vs rlog for visualization, running PCA and sample correlation, dete… |
在差异表达分析之前对RNA-seq计数矩阵进行质量 | R/Bioconductor、Python | Quality control and exploration of RNA-seq count matrices before differential expression. Check for outliers, batch effects, and sample relationships. Use when assessing count matrix quality before DE analysis. |
featureCounts-计数 | CLI、短读长 | Count reads per gene from aligned BAM files using Subread featureCounts. Use when processing BAM files from STAR/HISAT2 to generate gene-level counts for DESeq2/edgeR. |
featureCounts-从对齐的 | R/Bioconductor、Python、CLI、短读长 | Count reads per gene from aligned BAM files using Subread featureCounts. Use when turning STAR/HISAT2 BAMs into a gene-level count matrix for DESeq2/edgeR, deciding library strandedness, handling paired-end fragment cou… |
的转录本级定量导入 | R/Bioconductor | Import transcript-level quantifications from Salmon/kallisto/RSEM into R for gene-level analysis with DESeq2/edgeR using tximport or tximeta. Use when summarizing transcript abundances to gene counts with the correct le… |
的转录本级别定量导入 | R/Bioconductor | Import transcript-level quantifications from Salmon/kallisto into R for gene-level analysis with DESeq2/edgeR using tximport or tximeta. Use when importing transcript counts into R for DESeq2/edgeR. |
的差异表达 | R/Bioconductor | Tests miRNAs for differential expression with DESeq2 or edgeR using small-RNA-aware normalization and filtering. Use when deciding which normalization survives a library dominated by a few hyper-abundant miRNAs (composi… |
对条件间的 | R/Bioconductor | Perform differential expression analysis of miRNAs between conditions using DESeq2 or edgeR with small RNA-specific considerations. Use when identifying miRNAs that change between treatment groups, disease states, or de… |
miRge3-分析 | CPU、Python、CLI、短读长 | Quantifies known miRNAs, isomiRs, tRFs, and A-to-I editing fast with miRge3.0 by aligning collapsed reads to curated miRBase or MirGeneDB libraries. Use when choosing miRBase versus MirGeneDB as the reference; deciding… |
文件到差异丰度 | R/Bioconductor、Python | End-to-end flow, spectral, and mass cytometry (CyTOF) pipeline from raw FCS files to differentially abundant/expressed cell populations. Orchestrates the read -> compensate/unmix -> transform -> QC -> doublet-removal ->… |
从MaxQuant输出到差异蛋白丰度的端到端蛋白质 | R/Bioconductor | End-to-end proteomics workflow from MaxQuant output to differential protein abundance. Orchestrates data import, normalization, imputation, and statistical testing with MSstats or limma. Use when processing mass spectro… |
蛋白质组学-流程 | R/Bioconductor、长读长 | Orchestrates bottom-up proteomics from a search engine's output (MaxQuant/FragPipe/DIA-NN) to differential protein abundance with limma/DEqMS/MSstats. Use when committing the search database + acquisition mode (DDA vs D… |
从FASTQ到差异miRNA表达的端到端小RNA测 | R/Bioconductor、CLI | End-to-end small RNA-seq analysis from FASTQ to differential miRNA expression. Use when analyzing miRNA, piRNA, or other small RNA sequencing data. |
Small-RNA-seq-流程 | R/Bioconductor、CLI | Orchestrates the end-to-end small RNA-seq pipeline from FASTQ to differential miRNAs and expression-filtered targets, chaining kit-aware cutadapt trimming (adapter on every read, UMI/4N handling), miRge3 known+isomiR qu… |
分析 | 读取入口说明确认依赖与输入 | Walk Claude through PyDESeq2-based differential expression, including ID mapping, DE testing, fold-change thresholding, and enrichment visualisation. |
DESeq2-差异表达分析 | CLI | Use when testing bulk RNA-seq differential expression from integer counts |
DESeq2-差异表达分析 | R/Bioconductor、Python | Bulk RNA-seq DE with R/Bioconductor DESeq2. Negative binomial GLM, empirical Bayes shrinkage, Wald/LRT tests, multi-factor designs, Salmon tximeta import, apeglm LFC shrinkage, MA/volcano/heatmap viz. R gold standard. U… |
DESeq2对象初始化 | 读取入口说明确认依赖与输入 | Use when you have transcript-level abundance, count, and length estimates (from salmon, Sailfish, or kallisto via tximport) and want to perform gene-level differential expression analysis in DESeq2 using the 'original c… |
经验贝叶斯调和 | R/Bioconductor、Python | Tests for differentially abundant proteins between conditions with limma/DEqMS empirical-Bayes moderation, proDA/msqrob2/MSstats missingness modeling, and Python Welch+BH alternatives. Frames missing values as left-cens… |
分析 | R/Bioconductor、单细胞 | Differential abundance (DA) and differential state (DS) analysis for flow and mass cytometry - tests which cell populations change in frequency or marker expression between conditions using diffcyt (edgeR/voom/GLMM for… |
edgeR-差异表达分析 | CLI | Use when testing RNA-seq differential expression with edgeR, especially |
edger-dgeobject-构建 | 读取入口说明确认依赖与输入 | Use when you have transcript-level abundance estimates and count matrices from tximport (derived from Salmon, Sailfish, or kallisto output) and need to prepare them for differential expression analysis in edgeR. |
表达-level-过滤-edger | R/Bioconductor | Use when when you have a raw count matrix derived from Salmon or similar |
分析 | R/Bioconductor、单细胞 | Genomics analysis in R with Bioconductor, differential expression, enrichment, batch correction, and single-cell workflows. |
limma-技能框架 | 读取入口说明确认依赖与输入 | limma skill scaffold; replace this scaffold with a tested implementation. |
对基因列表或排名的基因数据进行通路和基因集富集分析 | 读取入口说明确认依赖与输入 | Run pathway and gene-set enrichment analysis on gene lists or ranked gene data, then interpret the results. Use whenever the user has a set of genes (differentially expressed genes from PyDESeq2/Scanpy, CRISPR-screen hi… |
预处理-处理 | Python、单细胞 | Quality control, filtering, and normalization for spatial transcriptomics (Visium, Visium HD, Xenium, MERFISH/MERSCOPE, CosMx, Slide-seq) with Squidpy and Scanpy. Use when setting QC floors that do NOT delete real low-c… |
RNA-seq-差异-表达-分析-DESeq2 | R/Bioconductor、Python、CLI | RNA-seq differential expression analysis with DESeq2, edgeR, and limma-voom — DEG lists, fold changes, dispersion estimation, design formulas including covariates, multi-condition contrasts, and Venn-set operations acro… |
可变剪接
共同目标:围绕“可变剪接”完成同一分析环节;以下入口保留不同算法、工具或工作流。
重点比较:比较事件级、转录本级和 junction 级方法,关注长短读长、重复数和 PSI/差异剪接输出。
本任务族共有 3 个独立入口、3 个名称。
| Skill | 技术路线/资源标签 | 适用范围与主要差异 |
|---|---|---|
替代剪切技能框架 | 读取入口说明确认依赖与输入 | Alternative splicing skill scaffold; replace this scaffold with a tested implementation. |
条件间可替代剪接事件比较 | 读取入口说明确认依赖与输入 | Use when you have PSI (percent-spliced-in) matrices calculated independently for two or more biological conditions, each with two or more replicate samples, and you want to identify which alternative splicing events sho… |
alternative-剪接-event-解析 | 读取入口说明确认依赖与输入 | Use when when you have a GTF genome annotation and need to identify all local alternative splicing events (SE, RI, A5/A3, MX, AF/AL) or transcript-level isoform events for a given gene set, prior to quantifying PSI valu… |
名称不同但语义近似的补充候选
以下分组由名称与描述中的稀有任务词识别,未自动合并。它们可能是别名、 包含关系或相邻步骤;使用前应以各自入口的输入输出边界为准。
候选组 1
Long-Read-从PacBio:Analyzes alternative splicing from PacBio Iso-Seq (HiFi, Kinnex/MAS-Iso-seq) and Oxford Nanopore (direct cDNA, direct RNA, R10.4.1+) long-read RNA-seq with full-isoform resolution…Long-读段-剪接-分析:Analyzes alternative splicing from PacBio Iso-Seq (HiFi, Kinnex/MAS-Iso-seq) and Oxford Nanopore (direct cDNA, direct RNA, R10.4.1+) long-read RNA-seq with full-isoform resolution…
候选组 2
通过:Analyzes CRISPR drug-modifier (chemogenomic) screens with drugZ (Li & Hart 2019 Genome Med), a bidirectional Z-score method that identifies synthetic-lethal sensitizing genes and…药物修饰剂:Analyzes CRISPR drug-modifier (chemogenomic) screens with drugZ (Colic et al. 2019 Genome Med), a bidirectional Z-score method that identifies synthetic-lethal sensitizing genes a…
候选组 3
在差异表达分析之前对RNA-seq计数矩阵进行质量:Quality control and exploration of RNA-seq count matrices before differential expression. Check for outliers, batch effects, and sample relationships. Use when assessing count mat…在差异表达分析之前对RNA-seq计数矩阵进行质量:Quality control and exploration of RNA-seq count matrices before differential expression. Check for outliers, batch effects, and sample relationships. Use when assessing count mat…
候选组 4
进行情肽分析:Analyze cell-cell communication in spatial transcriptomics data using ligand-receptor analysis with Squidpy. Infer intercellular signaling, identify communication pathways, and vi…空间转录组:Analyze cell-cell communication in spatial transcriptomics data using ligand-receptor analysis with Squidpy. Infer intercellular signaling, identify communication pathways, and vi…
候选组 5
miRNA-预测:Predict miRNA target genes using sequence-based algorithms and database lookups. Use when identifying potential mRNA targets of differentially expressed or functionally important…miRNA-预测:Predict miRNA target genes using sequence-based algorithms and database lookups. Use when identifying potential mRNA targets of differentially expressed or functionally important…
候选组 6
此技能检测单个罕见疾病患者与对照面板之间的异常剪接:Detects aberrant splicing in single rare-disease patients vs a control panel using FRASER 2.0 (Bioconductor; Beta-binomial autoencoder on Intron Jaccard Index, default delta cutof…此技能检测单个罕见疾病患者与对照面板之间的异常剪接:Detects aberrant splicing in single rare-disease patients vs a control panel using FRASER 2.0 (Bioconductor; Beta-binomial autoencoder on Intron Jaccard Index, default delta cutof…
候选组 7
转录本-基因-比对:Use when you have transcript-level quantification files (salmon quant.sf.gz, kallisto, or Sailfish output) and need to perform gene-level differential expression analysis.转录本-基因-聚合:Use when when you have transcript-level quantification files (e.g., Salmon quant.sf.gz, kallisto abundance.h5, or RSEM .results) and need to construct a gene-level count matrix fo…转录基因总结:Use when you have transcript-level quantification files (salmon quant.sf.gz, kallisto h5, or Sailfish output) and need to perform gene-level differential expression analysis.转录本-丰度-定量-import:Use when you have transcript abundance files (e.g., Salmon quant.sf.gz, kallisto abundance.h5, RSEM .isoforms.results) from a quantification tool and need to construct a gene-leve…
候选组 8
导入基因表达计数矩阵:Imports gene expression count matrices from featureCounts, HTSeq, STAR ReadsPerGene, Salmon/kallisto via tximport or tximeta, RSEM, 10X Genomics MTX/H5, AnnData H5AD, and RDS. Han…导入基因表达计数矩阵:Imports gene expression count matrices from featureCounts, HTSeq, STAR ReadsPerGene, Salmon/kallisto via tximport or tximeta, RSEM, 10X Genomics MTX/H5, AnnData H5AD, and RDS. Han…
候选组 9
对条件间的:Perform differential expression analysis of miRNAs between conditions using DESeq2 or edgeR with small RNA-specific considerations. Use when identifying miRNAs that change between…对条件间的:Perform differential expression analysis of miRNAs between conditions using DESeq2 or edgeR with small RNA-specific considerations. Use when identifying miRNAs that change between…
候选组 10
注释:Discovers, classifies, and masks repetitive elements and transposable elements with RepeatModeler2 (de novo family library), RepeatMasker (masking against a library), EDTA (plant/…注释:Discovers, classifies, and masks repetitive elements and transposable elements with RepeatModeler2 (de novo family library), RepeatMasker (masking against a library), EDTA (plant/…
候选组 11
miRge3-分析:Fast miRNA quantification with isomiR detection and A-to-I editing analysis using miRge3. Use when quantifying known miRNAs quickly or analyzing isomiR variants and RNA editing.miRge3-分析:Fast miRNA quantification with isomiR detection and A-to-I editing analysis using miRge3. Use when quantifying known miRNAs quickly or analyzing isomiR variants and RNA editing.
候选组 12
RNA-seq-丰度-矩阵-处理:Use when you have transcript-level quantification output files (quant.sf, quant.gz) from salmon, kallisto, sailfish, or oarfish and need to produce gene-level count matrices, abun…转录本-level-丰度-import:Use when you have transcript-level quantification files (quant.sf.gz or quant.gz) from salmon, sailfish, kallisto, or oarfish and need to aggregate them into gene-level or transcr…
候选组 13
计算翻译效率:Calculate translation efficiency (TE) as the ratio of ribosome occupancy to mRNA abundance. Use when comparing translational regulation between conditions or identifying genes wit…计算翻译效率:Calculate translation efficiency (TE) as the ratio of ribosome occupancy to mRNA abundance. Use when comparing translational regulation between conditions or identifying genes wit…
候选组 14
m5C位点预测:m5C位点预测 skill scaffold; replace this scaffold with a tested implementation.m6A位点预测:m6A位点预测 skill scaffold; replace this scaffold with a tested implementation.Poly-A-位点预测:Poly(A)位点预测 skill scaffold; replace this scaffold with a tested implementation.
候选组 15
RNA-seq-计数-矩阵-生成:Use when you have transcript-level abundance estimates from salmon, sailfish, or kallisto quantification and need gene-level count matrices for differential expression analysis.转录本-level-计数-聚合:Use when you have transcript-level abundance and count estimates from salmon, sailfish, kallisto, or oarfish and need gene-level matrices for downstream differential analysis with…
候选组 16
分析:Differential abundance (DA) and differential state (DS) analysis for flow and mass cytometry - tests which cell populations change in frequency or marker expression between condit…分析:Differential abundance (DA) and differential state (DS) analysis for flow and mass cytometry - tests which cell populations change in frequency or marker expression between condit…
候选组 17
ORF-RiboCode和ORFquant从Ribos:Detect and quantify translated ORFs from Ribo-seq data including uORFs and novel ORFs using RiboCode and ORFquant. Use when identifying translated regions beyond annotated coding…ORF-RiboCode和ORFquant从Ribos:Detect and quantify translated ORFs from Ribo-seq data including uORFs and novel ORFs using RiboCode and ORFquant. Use when identifying translated regions beyond annotated coding…
候选组 18
检查3个核苷酸周期性和计算P位点偏移来验证Ri:Validate Ribo-seq data quality by checking 3-nucleotide periodicity and calculating P-site offsets. Use when assessing library quality or determining read offsets for downstream a…检查3个核苷酸周期性和计算P位点偏移来验证Ri:Validate Ribo-seq data quality by checking 3-nucleotide periodicity and calculating P-site offsets. Use when assessing library quality or determining read offsets for downstream a…
候选组 19
Ribo-seq-预处理-处理:Preprocess ribosome profiling data including adapter trimming, size selection, rRNA removal, and alignment. Use when preparing Ribo-seq reads for downstream analysis of translatio…Ribo-seq-预处理-处理:Preprocess ribosome profiling data including adapter trimming, size selection, rRNA removal, and alignment. Use when preparing Ribo-seq reads for downstream analysis of translatio…
候选组 20
设计:Designs genomics experiments so technical nuisance variation (batch, lane, plate, flow cell, operator, reagent lot, processing day) is balanced against the biological variable of…设计:Designs genomics experiments so technical nuisance variation (batch, lane, plate, flow cell, operator, reagent lot, processing day) is balanced against the biological variable of…
候选组 21
从RNA-seq中量化可变剪接:Quantifies alternative splicing as PSI (percent spliced in) from RNA-seq using rMATS-turbo (BAM-based event), SUPPA2 (TPM-based event), MAJIQ V3 (LSV-based Bayesian), leafcutter (…从RNA-seq中量化可变剪接:Quantifies alternative splicing as PSI (percent spliced in) from RNA-seq using rMATS-turbo (BAM-based event), SUPPA2 (TPM-based event), MAJIQ V3 (LSV-based Bayesian), leafcutter (…
候选组 22
RNA-seq-特定的质量控制包括:RNA-seq specific quality control including rRNA contamination detection, strandedness verification, gene body coverage, and transcript integrity metrics. Use when validating RNA-s…RNA-seq-特定的质量控制包括:RNA-seq specific quality control including rRNA contamination detection, strandedness verification, gene body coverage, and transcript integrity metrics. Use when validating RNA-s…
候选组 23
创建sashimi风格图展示RNA-seq读段覆盖:Creates sashimi-style plots showing RNA-seq read coverage and splice junction counts using ggsashimi (general-purpose, condition-grouped overlays), rmats2sashimiplot (rMATS-output…条件分组叠加:Creates sashimi-style plots showing RNA-seq read coverage and splice junction counts using ggsashimi (general-purpose, condition-grouped overlays), rmats2sashimiplot (rMATS-output…
候选组 24
将样本元数据与计数矩阵对齐并为下游差异表达:Aligns sample metadata with count matrices and constructs design matrices for downstream DE, handling the alphabetical-reference-level trap (relevel BEFORE DESeq), LRT reduced-mod…将样本元数据与计数矩阵对齐并为下游差异表达:Aligns sample metadata with count matrices and constructs design matrices for downstream DE, handling the alphabetical-reference-level trap (relevel BEFORE DESeq), LRT reduced-mod…
候选组 25
预处理-处理:Preprocess small RNA sequencing data with adapter trimming and size selection optimized for miRNA, piRNA, and other small RNAs. Use when preparing small RNA-seq reads for downstre…预处理-处理:Preprocess small RNA sequencing data with adapter trimming and size selection optimized for miRNA, piRNA, and other small RNAs. Use when preparing small RNA-seq reads for downstre…
候选组 26
转录本-event-提取:Use when you have a genome annotation GTF file and need to identify all transcript-level alternative splicing events (exon skipping, intron retention, alternative splice sites, mu…isoform-结构-注释:Use when when you have a GTF genome annotation and need to catalog all transcript isoforms and local alternative splicing event variants (exon skipping, intron retention, alternat…
候选组 27
注释:Annotate CLIP-seq peaks or crosslink sites to RNA features (5'UTR, CDS, 3'UTR, intron, splice junction, snoRNA, tRNA, ncRNA, repeat elements) with ChIPseeker, RCAS, RBP-Maps (Yeo…注释:Annotate CLIP-seq peaks or crosslink sites to RNA features (5'UTR, CDS, 3'UTR, intron, splice junction, snoRNA, tRNA, ncRNA, repeat elements) with ChIPseeker, RCAS, RBP-Maps (Yeo…
候选组 28
从Riboseq数据中以编码子分辨率检测Ribo:Detect ribosome pausing and stalling sites from Ribo-seq data at codon resolution. Use when studying translational regulation, identifying pause sites, or analyzing codon-specific…从Riboseq数据中以编码子分辨率检测Ribo:Detect ribosome pausing and stalling sites from Ribo-seq data at codon resolution. Use when studying translational regulation, identifying pause sites, or analyzing codon-specific…
候选组 29
筛选中的批次效应校正:Batch effect correction for CRISPR screens covering ComBat empirical-Bayes, RUV, SVA, control-sgRNA normalization, and the model-based alternative of including batch as a covariat…筛选中的批次效应校正:Batch effect correction for CRISPR screens covering ComBat empirical-Bayes, RUV, SVA, control-sgRNA normalization, and the model-based alternative of including batch as a covariat…
候选组 30
的转录本级别定量导入:Import transcript-level quantifications from Salmon/kallisto into R for gene-level analysis with DESeq2/edgeR using tximport or tximeta. Use when importing transcript counts into…的转录本级别定量导入:Import transcript-level quantifications from Salmon/kallisto into R for gene-level analysis with DESeq2/edgeR using tximport or tximeta. Use when importing transcript counts into…
候选组 31
CLIP-seq-深度学习:Predict RBP binding from RNA sequence using deep learning models (RBPNet sequence-to-signal, RNAProt RNN, GraphProt2 GCN with structure, DeepCLIP, DeepRiPe multi-modal CNN) for va…CLIP-seq-深度学习:Predict RBP binding from RNA sequence using deep learning models (RBPNet sequence-to-signal, RNAProt RNN, GraphProt2 GCN with structure, DeepCLIP, DeepRiPe multi-modal CNN) for va…
候选组 32
注释-预测:Predicts protein-coding gene structures (exons, introns, UTRs) in eukaryotic genomes with BRAKER3 (RNA-seq + protein evidence), BRAKER1/BRAKER2, GALBA (protein-only), Funannotate…注释-预测:Predicts protein-coding gene structures (exons, introns, UTRs) in eukaryotic genomes with BRAKER3 (RNA-seq + protein evidence), BRAKER1/BRAKER2, GALBA (protein-only), Funannotate…
候选组 33
CLIP-seq-文件中调用蛋白质-RNA:Call protein-RNA binding sites from CLIP-seq BAM with CLIPper, PureCLIP, Skipper, Piranha, omniCLIP, CTK, CLAM, or Paraclu. Use when choosing between coverage-based, HMM-based, be…CLIP-seq-文件中调用蛋白质-RNA:Call protein-RNA binding sites from CLIP-seq BAM with CLIPper, PureCLIP, Skipper, Piranha, omniCLIP, CTK, CLAM, or Paraclu. Use when choosing between coverage-based, HMM-based, be…
候选组 34
差异-剪接:Detects differential alternative splicing between conditions using rMATS-turbo (binomial LRT on junction counts), leafcutter (Dirichlet-multinomial GLM on intron clusters), MAJIQ…差异-剪接:Detects differential alternative splicing between conditions using rMATS-turbo (binomial LRT on junction counts), leafcutter (Dirichlet-multinomial GLM on intron clusters), MAJIQ…
候选组 35
预处理-处理:Quality control, filtering, normalization, and feature selection for spatial transcriptomics data. Calculate QC metrics, filter spots/cells, normalize counts, and identify highly…空间转录组-预处理:Quality control, filtering, normalization, and feature selection for spatial transcriptomics data. Calculate QC metrics, filter spots/cells, normalize counts, and identify highly…
候选组 36
CLIP-seq-分析:Discover RBP binding motifs from CLIP-seq peaks or single-nucleotide crosslink sites using HOMER, MEME/STREME, kpLogo, mCross (CL-position-registered motifs), PEKA (positional k-m…CLIP-seq-分析:Discover RBP binding motifs from CLIP-seq peaks or single-nucleotide crosslink sites using HOMER, MEME/STREME, kpLogo, mCross (CL-position-registered motifs), PEKA (positional k-m…
候选组 37
AGO-CLIP-嵌合读段:Identify direct miRNA-target interactions from AGO HITS-CLIP, AGO-CLEAR-CLIP (chimeric reads), HEAP (Halo-Ago2 mouse), chimeric eCLIP / miR-eCLIP (deep miRNA-target profiling), or…AGO-CLIP-嵌合读段:Identify direct miRNA-target interactions from AGO HITS-CLIP, AGO-CLEAR-CLIP (chimeric reads), HEAP (Halo-Ago2 mouse), chimeric eCLIP / miR-eCLIP (deep miRNA-target profiling), or…
候选组 38
miRDeep2-分析:Discover novel miRNAs and quantify known miRNAs using miRDeep2 de novo prediction from small RNA-seq data. Use when identifying new miRNAs or performing comprehensive miRNA profil…miRDeep2-分析:Discover novel miRNAs and quantify known miRNAs using miRDeep2 de novo prediction from small RNA-seq data. Use when identifying new miRNAs or performing comprehensive miRNA profil…
候选组 39
分析差异转录本使用:Analyzes differential transcript usage (DTU) and isoform switches with functional consequence prediction (NMD via 50nt rule, ORF disruption, protein domain loss/gain, signal pepti…分析差异转录本使用:Analyzes differential transcript usage (DTU) and isoform switches with functional consequence prediction (NMD via 50nt rule, ORF disruption, protein domain loss/gain, signal pepti…
候选组 40
featureCounts-计数:Count reads per gene from aligned BAM files using Subread featureCounts. Use when processing BAM files from STAR/HISAT2 to generate gene-level counts for DESeq2/edgeR.featureCounts-计数:Count reads per gene from aligned BAM files using Subread featureCounts. Use when processing BAM files from STAR/HISAT2 to generate gene-level counts for DESeq2/edgeR.
候选组 41
Non-Coding-注释:Identifies non-coding RNAs (tRNA, rRNA, snoRNA, snRNA, riboswitches, sRNAs) using Infernal covariance-model search against Rfam, tRNAscan-SE 2.0 for tRNA, barrnap for rRNA, and AR…Non-Coding-注释:Identifies non-coding RNAs (tRNA, rRNA, snoRNA, snRNA, riboswitches, sRNAs) using Infernal covariance-model search against Rfam, tRNAscan-SE 2.0 for tRNA, barrnap for rRNA, and AR…
候选组 42
滑动窗口:Identify differentially bound regions across CLIP-seq conditions (knockdown vs control, treatment vs vehicle, disease vs healthy) using DEWSeq (sliding-window DESeq2), Flipper (Sk…滑动窗口:Identify differentially bound regions across CLIP-seq conditions (knockdown vs control, treatment vs vehicle, disease vs healthy) using DEWSeq (sliding-window DESeq2), Flipper (Sk…
候选组 43
CLIP-seq-全面的质量控制用于:Comprehensive quality control for CLIP-seq libraries (eCLIP, iCLIP, iCLIP2, PAR-CLIP) covering library complexity (preseq), FRiP, IDR replicate reproducibility, read-distribution…CLIP-seq-全面的质量控制用于:Comprehensive quality control for CLIP-seq libraries (eCLIP, iCLIP, iCLIP2, PAR-CLIP) covering library complexity (preseq), FRiP, IDR replicate reproducibility, read-distribution…
候选组 44
CLIP-seq-截断模式:Detect single-nucleotide crosslink (CL) sites in CLIP-seq data using truncation patterns (iCLIP/eCLIP CITS), crosslink-induced mutations (HITS-CLIP CIMS deletions, PAR-CLIP T-to-C…CLIP-seq-截断模式:Detect single-nucleotide crosslink (CL) sites in CLIP-seq data using truncation patterns (iCLIP/eCLIP CITS), crosslink-induced mutations (HITS-CLIP CIMS deletions, PAR-CLIP T-to-C…
候选组 45
可视化:Visualize spatial transcriptomics data using Squidpy and Scanpy. Create tissue plots with gene expression, clusters, and annotations overlaid on histology images. Use when visuali…空间转录组-可视化:Visualize spatial transcriptomics data using Squidpy and Scanpy. Create tissue plots with gene expression, clusters, and annotations overlaid on histology images. Use when visuali…
候选组 46
剪接-Specific-质量-Control:Assesses RNA-seq data quality specifically for alternative splicing analysis. QC layers include experimental design audit (library prep, read length, depth, replicates), STAR 2-pa…剪接-Specific-质量-Control:Assesses RNA-seq data quality specifically for alternative splicing analysis. QC layers include experimental design audit (library prep, read length, depth, replicates), STAR 2-pa…
示例提示词
围绕《你的疾病或生物过程》寻找带表达矩阵和样本分组的公共数据,比较适用性并设计一个小规模表达比较任务。
包含的科研 Skills31 个
- 转录与翻译调控元件分析在转录组学领域开展“5'UTR结构预测”任务时使用;根据输入、科学假设和运行环境,在翻译组学与翻译调控下已保留的方法实现之间路由。v0.1.1
- 可变剪接分析在转录组学领域开展“交替剪接”任务时使用;根据输入、科学假设和运行环境,在RNA结构与剪接下已保留的方法实现之间路由。v0.1.4
- Bulk RNA-seq差异表达分析在转录组学领域开展“DESeq2-差异表达分析”任务时使用;根据输入、科学假设和运行环境,在差异表达分析下已保留的方法实现之间路由。v0.1.2
- 融合转录本检测在转录组学领域开展“融合转录本检测”任务时使用;根据输入、科学假设和运行环境,在RNA结构与剪接下已保留的方法实现之间路由。v0.1.1
- RNA修饰位点分析在转录组学领域开展“m6A位点预测”任务时使用;根据输入、科学假设和运行环境,在RNA调控分析下已保留的方法实现之间路由。v0.1.1
- 非编码RNA分析在转录组学领域开展“miRNA分析”任务时使用;根据输入、科学假设和运行环境,在RNA调控分析下已保留的方法实现之间路由。v0.1.1
- CLIP-seq与RBP结合分析在转录组学领域开展“RBP调控”任务时使用;根据输入、科学假设和运行环境,在RNA调控分析下已保留的方法实现之间路由。v0.1.1
- Ribo-seq翻译组分析在转录组学领域开展“Ribo-seq分析”任务时使用;根据输入、科学假设和运行环境,在翻译组学与翻译调控下已保留的方法实现之间路由。v0.1.1
- RNA编辑检测在转录组学领域开展“RNA编辑”任务时使用;根据输入、科学假设和运行环境,在RNA结构与剪接下已保留的方法实现之间路由。v0.1.1
- RNA-seq表达定量在转录组学领域开展“RNA定量”任务时使用;根据输入、科学假设和运行环境,在RNA-seq分析下已保留的方法实现之间路由。v0.1.2
- 转录因子活性推断在转录组学领域开展“TF活性推断”任务时使用;根据输入、科学假设和运行环境,在RNA调控分析下已保留的方法实现之间路由。v0.1.1
- 转录本组装在转录组学领域开展“转录本组装”任务时使用;根据输入、科学假设和运行环境,在RNA-seq分析下已保留的方法实现之间路由。v0.1.1
- nf-core-alleleexpression流程当RNA 数据及匹配基因型可用于研究等位基因表达不平衡时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/alleleexpression。v0.1.0
- nf-core-cageseq流程当转录起始相关 CAGE 测序需要提取标签和起始位点时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/cageseq。v0.1.0
- nf-core-circrna流程当RNA 测序需要识别环状 RNA 或比较反向剪接信号时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/circrna。v0.1.0
- nf-core-clipseq流程当RNA 蛋白结合实验的 CLIP、iCLIP 或 eCLIP 数据需要处理时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/clipseq。v0.1.0
- nf-core-dartseq流程当带编辑标记的 RNA 数据需要分析修饰相关位点时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/dartseq。v0.1.0
- nf-core-denovotranscript流程当没有合适参考基因组,已有双端 RNA 测序并希望重建转录本时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/denovotranscript。v0.1.0
- nf-core-lncpipe流程当RNA 数据需要发现或整理长非编码 RNA 候选时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/lncpipe。v0.1.0
- nf-core-nanostring流程当已有 nCounter 计数、探针 panel 或 RCC 交付数据,需要表达比较时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/nanostring。v0.1.0
- nf-core-nascent流程当新生转录实验的 PRO、GRO 或 NET 类测序需要信号分析时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/nascent。v0.1.0
- nf-core-riboseq流程当核糖体足迹测序需要定位翻译区域或估计翻译效率时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/riboseq。v0.1.0
- nf-core-rnafusion流程当RNA 测序需要寻找融合转录本或复核融合候选时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/rnafusion。v0.1.0
- nf-core-rnaseq流程当测序报告或建库证据表明是普通整体 RNA 测序,需要整理表达或比较样本时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/rnaseq。v0.1.0
- nf-core-rnasplice流程当RNA 测序及样本分组用于研究可变剪接或转录本使用变化时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/rnasplice。v0.1.0
- nf-core-rnastructurome流程当DMS 或 SHAPE 等 RNA 化学探测数据需要反应性或结构相关分析时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/rnastructurome。v0.1.0
- nf-core-rnavar流程当只有 RNA 测序或需补充 RNA 层证据,希望识别表达区域变异时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/rnavar。v0.1.0
- nf-core-slamseq流程当代谢标记 SLAM-seq 数据需要估计新生 RNA 比例或动力学时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/slamseq。v0.1.0
- nf-core-smrnaseq流程当小 RNA 建库数据需要识别 miRNA 或其他短 RNA 并定量时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/smrnaseq。v0.1.0
- nf-core-stableexpression流程当多个表达数据集需要筛选在指定条件下稳定的参考基因时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/stableexpression。v0.1.0
- nf-core-tfactivity流程当表达和染色质可及性数据希望推断转录因子活动变化时使用。根据文件、实验背景与研究问题判断适配性,选择方法及参数并解释限制;无需用户知道 nf-core/tfactivity。v0.1.0
常见问题
转录组学能做什么?
RNA测序、表达、剪接与转录调控分析。
如何安装转录组学?
在科搭 Codar 左侧点击「插件」,在「插件」页签搜索「转录组学」并安装;也可以把本页的安装提示词发给 Claude Code 或 Codex。
转录组学需要哪些权限?
该科研插件没有声明额外权限;执行具体操作时仍由 Agent 按自身规则请求确认。
转录组学经过官方审核吗?
是。SpeedSkills 收录的每个版本都会记录内容摘要与权限声明,当前版本已通过安全审核。